multi insert
Showing 401–450 of 1838 results
-
Ingersoll 1.2598 Dia. Bright 4XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.260 (32.00 mm) Square Insert Indexable Drills Metric|L:D Ratio – 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
Ingersoll 0.5945 Dia. Bright 4XD Square Insert Indexable Coolant Thru Drill
0.594 (15.09 mm) Square Insert Indexable Drills|L:D Ratio – 4:1|
-
Iscar 1.875 Dia. 4XD Indexable Square Insert Coolant Thru Drill
1-7/8″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 4xD
-
Tungaloy 41 mm Dia. 2XD Indexable Insert Drill
41mm TungDrillTwisted Indexable insert drills, L/D=2, Flat cotter
-
Tungaloy 50 mm Dia. 5XD Indexable Insert Drill
50mm TungDrillTwisted Indexable insert drills, L/D=5, Flat cotter
-
Tungaloy 22.5 mm Dia. 2XD Indexable Insert Drill
22.5mm TungSix-Drill Indexable insert drills, L/D=2, Flat cotter
-
-
-
Tungaloy 36 mm Dia. 3XD Indexable Insert Drill
36mm TungDrillTwisted Indexable insert drills, L/D=3, Flat cotter
-
Ingersoll 1.7812 Dia. Bright 5XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.781 (45.24 mm) Square Insert Indexable Inch Drills|L:D Ratio – 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
Ingersoll 1.5312 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.531 (38.89 mm) Square Insert Indexable Drills Inch|L:D Ratio – 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Tungaloy 1.6250 Dia. 3XD Indexable Insert Drill
1-5/8″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 3, Flat cotter
-
Tungaloy 14.5 mm Dia. 5XD Indexable Insert Drill
14.5mm TungDrillTwisted Indexable insert drills, L/D=5, Flat cotter
-
Ingersoll 1.1811 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.181 (30.00 mm) Square Insert Indexable Drills Metric|L:D Ratio – 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|
-
Ingersoll 1.875 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.875 (47.63 mm) Flat Bottom Square Insert Indexable Drill – 3:1|L:D Ratio – 3:1|
-
Ingersoll 1.031 Dia. Bright 2XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.031 (26.19 mm) Square Insert Indexable Drills – Inch|L:D Ratio – 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Tungaloy 27.5 mm Dia. 3XD Indexable Insert Drill
27.5mm TungSix-Drill Indexable insert drills, L/D=3, Flat cotter
-
Tungaloy 45 mm Dia. 3XD Indexable Insert Drill
45mm TungSix-Drill Indexable insert drills, L/D=3, Flat cotter
-
Ingersoll 0.75 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.750 (19.05 mm) Flat Bottom Square Insert Indexable Drill – 3:1|L:D Ratio – 3:1|
-
-
Ingersoll 0.9375 Dia. Bright 5XD Square Insert Indexable Coolant Thru Drill
0.938 (23.83 mm) Square Insert Indexable Drills|L:D Ratio – 5:1|
-
-
Tungaloy 1.0156 Dia. 3XD Indexable Insert Drill
1.062″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 3, Flat cotter
-
Ingersoll 1.5 Dia. Bright 2XD Square Insert Indexable Coolant Thru Drill
1.500 (38.10 mm) Square Insert Indexable Drills|L:D Ratio – 2:1|
-
Iscar 0.625 Dia. 3XD Indexable Square Insert Coolant Thru Drill
5/8″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 3xD
-
Tungaloy 35 mm Dia. 3XD Indexable Insert Drill
35mm TungDrillTwisted Indexable insert drills with “TungCap” Exchangeable Shanks, L/D=3
-
Iscar 0.8125 Dia. 2XD Indexable Square Insert Coolant Thru Drill
0.812″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 2xD
-
Ingersoll 0.8438 Dia. Bright 3XD Square Insert Indexable Coolant Thru Drill
0.843 (21.41 mm) Square Insert Indexable Drills|L:D Ratio – 3:1|
-
Tungaloy 26 mm Dia. 3XD Indexable Insert Drill
26mm TungSix-Drill Indexable insert drills, L/D=3, Flat cotter
-
Ingersoll 1.2992 Dia. Bright 5XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.299 (33.00 mm) Square Insert Indexable Metric Drills|L:D Ratio – 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
Ingersoll 1.4062 Dia. Bright 5XD Square Insert Indexable Coolant Thru Drill
1.406 (35.71 mm) Square Insert Indexable Drills|L:D Ratio – 5:1|
-
-
-
Ingersoll 1.1417 Dia. Bright 5XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.142 (29.00 mm) Square Insert Indexable Metric Drills|L:D Ratio – 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Ingersoll 1.2205 Dia. Bright 2XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.221 (31.00 mm) Square Insert Indexable Drills – Metric|L:D Ratio – 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
Ingersoll 0.8438 Dia. Bright 4XD Square Insert Indexable Coolant Thru Drill
0.843 (21.41 mm) Square Insert Indexable Drills|L:D Ratio – 4:1|
-
Tungaloy 29 mm Dia. 4XD Indexable Insert Drill
29mm TungDrillTwisted Indexable insert drills, L/D=4, Flat cotter
-
Tungaloy 15.5 mm Dia. 2XD Indexable Insert Drill
15.5mm TungDrillTwisted Indexable insert drills, L/D=2, Flat cotter
-
Ingersoll 0.6496 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.650 (16.50 mm) Square Insert Indexable Drills Metric|L:D Ratio – 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|
-
Ingersoll 0.7087 Dia. Bright 4XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.709 (18.00 mm) Square Insert Indexable Drills Metric|L:D Ratio – 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Ingersoll 1.2205 Dia. Bright 4XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.221 (31.00 mm) Square Insert Indexable Drills Metric|L:D Ratio – 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Tungaloy 0.5625 Dia. 3XD Indexable Insert Drill
0.562″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 3, Flat cotter
-
-
Ingersoll 0.5315 Dia. Bright 2XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.531 (13.49 mm) Square Insert Indexable Drills – Metric|L:D Ratio – 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Ingersoll 0.7795 Dia. Bright 2XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.780 (19.81 mm) Square Insert Indexable Drills – Inch|L:D Ratio – 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Ingersoll 0.7283 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.728 (18.50 mm) Square Insert Indexable Drills Metric|L:D Ratio – 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|