multi insert
Showing 351–400 of 1838 results
-
Ingersoll 1.875 Dia. Bright 2XD Square Insert Indexable Coolant Thru Drill
1.875 (47.63 mm) Square Insert Indexable Drills|L:D Ratio – 2:1|
-
Tungaloy 34 mm Dia. 5XD Indexable Insert Drill
34mm TungDrillTwisted Indexable insert drills, L/D=5, Flat cotter
-
Tungaloy 1.1250 Dia. 2XD Indexable Insert Drill
1-1/8″ TungSix-Drill Indexable insert drills, L/D=2, Whistle notch
-
Ingersoll 0.75 Dia. Bright 4XD Square Insert Indexable Coolant Thru Drill
0.750 (19.05 mm) Square Insert Indexable Drills|L:D Ratio – 4:1|
-
Tungaloy 20.9 mm Dia. 3XD Indexable Insert Drill
20.9mm TungSix-Drill Indexable insert drills, L/D=3, Flat cotter
-
Ingersoll 1.6535 Dia. Bright 2XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.654 (42.00 mm) Square Insert Indexable Drills – Metric|L:D Ratio – 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
Tungaloy 32 mm Dia. 2XD Indexable Insert Drill
32mm TungDrillTwisted Indexable insert drills, L/D=2, Flat cotter
-
Ingersoll 0.7087 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.709 (18.00 mm) Square Insert Indexable Drills Metric|L:D Ratio – 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|
-
Ingersoll 0.748 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.748 (19.00 mm) Square Insert Indexable Drills Metric|L:D Ratio – 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|
-
Tungaloy 48 mm Dia. 2XD Indexable Insert Drill
48mm TungSix-Drill Indexable insert drills, L/D=2, Flat cotter
-
Ingersoll 1.031 Dia. Bright 2XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.031 (26.19 mm) Square Insert Indexable Drills – Inch|L:D Ratio – 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Tungaloy 18.5 mm Dia. 4XD Indexable Insert Drill
18.5mm TungDrillTwisted Indexable insert drills, L/D=4, Flat cotter
-
-
-
-
Tungaloy 1.8750 Dia. 3XD Indexable Insert Drill
1-7/8″ TungSix-Drill Indexable insert drills, L/D=3, Whistle notch
-
Ingersoll 1.625 Dia. Bright 5XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.625 (41.28 mm) Square Insert Indexable Inch Drills|L:D Ratio – 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
Tungaloy 25.5 mm Dia. 3XD Indexable Insert Drill
25.5mm TungDrillTwisted Indexable insert drills, L/D=3, Flat cotter
-
Ingersoll 1.4961 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.496 (38.00 mm) Square Insert Indexable Drills Metric|L:D Ratio – 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|
-
-
Iscar 0.5709 Dia. Indexable Chamfering Drill Head Coolant Thru
0.571 Indexable Head Drills with Chamfering Inserts Mainly for Pre-Thread Holes
-
Ingersoll 0.591 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.591 (15.01 mm) Square Insert Indexable Drills Inch|L:D Ratio – 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Ingersoll 0.7188 Dia. Bright 5XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.719 (18.26 mm) Square Insert Indexable Inch Drills|L:D Ratio – 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Tungaloy 0.9370 Dia. 3XD Indexable Insert Drill
0.937″ TungSix-Drill Indexable insert drills, L/D=3, Flat cotter
-
Ingersoll 1.8125 Dia. Bright 5XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.813 (46.05 mm) Square Insert Indexable Inch Drills|L:D Ratio – 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Ingersoll 3 Dia. Bright 4XD Large Diameter Indexable Coolant Thru Drill
3.000 (76.20 mm) Large Diameter Indexable Drills|L:D Ratio – 4:1|
-
Tungaloy 24 mm Dia. 2XD Indexable Insert Drill
24mm TungSix-Drill Indexable insert drills, L/D=2, Flat cotter
-
Tungaloy 1.2500 Dia. 2XD Indexable Insert Drill
1-1/4″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 2, Flat cotter
-
-
-
Tungaloy 43 mm Dia. 3XD Indexable Insert Drill
43mm TungDrillTwisted Indexable insert drills, L/D=3, Flat cotter
-
Tungaloy 1.8750 Dia. 2XD Indexable Insert Drill
1-7/8″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 2, Flat cotter
-
Ingersoll 1.2519 Dia. Bright 4XD Square Insert Indexable Coolant Thru Drill
1.252 (31.80 mm) Square Insert Indexable Drills|L:D Ratio – 4:1|
-
Ingersoll 1.5354 Dia. Bright 4XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.535 (39.00 mm) Square Insert Indexable Drills Metric|L:D Ratio – 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Iscar 0.315 Dia. Indexable Chamfering Drill Head Coolant Thru
0.315 Indexable Head Drills with Chamfering Inserts Mainly for Pre-Thread Holes
-
Ingersoll 1.063 Dia. Bright 4XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.063 (27.00 mm) Square Insert Indexable Drills Metric|L:D Ratio – 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Tungaloy 24 mm Dia. 4XD Indexable Insert Drill
24mm TungSix-Drill Indexable insert drills, L/D=4, Flat cotter
-
Tungaloy 44 mm Dia. 4XD Indexable Insert Drill
44mm TungDrillTwisted Indexable insert drills, L/D=4, Flat cotter
-
Ingersoll 1 Dia. Bright 2XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.000 (25.40 mm) Square Insert Indexable Drills – Inch|L:D Ratio – 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
-
Iscar 1.125 Dia. 2XD Indexable Square Insert Coolant Thru Drill
1-1/8″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 2xD
-
Ingersoll 1.7323 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.732 (44.00 mm) Square Insert Indexable Drills Metric|L:D Ratio – 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|
-
Ingersoll 1.1875 Dia. Bright 2XD Square Insert Indexable Coolant Thru Drill
1.187 (30.15 mm) Square Insert Indexable Drills|L:D Ratio – 2:1|
-
-
Ingersoll 1.625 Dia. Bright 3XD Square Insert Indexable Coolant Thru Drill
1.625 (41.28 mm) Square Insert Indexable Drills|L:D Ratio – 3:1|
-
Ingersoll 1.8898 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.890 (48.00 mm) Square Insert Indexable Drills Metric|L:D Ratio – 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|
-
