multi insert
Showing 1–50 of 1838 results
-
-
-
Ingersoll 0.8858 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.886 (22.50 mm) Square Insert Indexable Drills Metric|L:D Ratio – 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|
-
-
-
Ingersoll 0.875 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.875 (22.23 mm) Square Insert Indexable Drills Inch|L:D Ratio – 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Tungaloy 36 mm Dia. 4XD Indexable Insert Drill
36mm TungDrillTwisted Indexable insert drills, L/D=4, Flat cotter
-
Tungaloy 24.5 mm Dia. 2XD Indexable Insert Drill
24.5mm TungDrillTwisted Indexable insert drills, L/D=2, Flat cotter
-
Tungaloy 15.5 mm Dia. 5XD Indexable Insert Drill
15.5mm TungDrillTwisted Indexable insert drills, L/D=5, Flat cotter
-
Ingersoll 0.5312 Dia. Bright 5XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.531 (13.49 mm) Square Insert Indexable Inch Drills|L:D Ratio – 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
Iscar 1.25 Dia. 4XD Indexable Square Insert Coolant Thru Drill
1-1/4″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 4xD
-
-
-
-
-
-
Iscar 0.625 Dia. 3XD Indexable Square Insert Coolant Thru Drill
5/8″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 3xD
-
Iscar 0.75 Dia. 3XD Indexable Square Insert Coolant Thru Drill
3/4″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 3xD
-
Ingersoll 0.8661 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.866 (22.00 mm) Square Insert Indexable Drills Metric|L:D Ratio – 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|
-
Ingersoll 0.689 Dia. Bright 5XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.689 (17.50 mm) Square Insert Indexable Inch Drills|L:D Ratio – 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Tungaloy 40 mm Dia. 3XD Indexable Insert Drill
40mm TungSix-Drill Indexable insert drills, L/D=3, Flat cotter
-
-
-
Tungaloy 39 mm Dia. 5XD Indexable Insert Drill
39mm TungDrillTwisted Indexable insert drills, L/D=5, Flat cotter
-
Tungaloy 17 mm Dia. 5XD Indexable Insert Drill
17mm TungDrillTwisted Indexable insert drills, L/D=5, Flat cotter
-
Ingersoll 0.7188 Dia. Bright 5XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.719 (18.26 mm) Square Insert Indexable Inch Drills|L:D Ratio – 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Tungaloy 2.1250 Dia. 2XD Indexable Insert Drill
2-1/8″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 2, Flat cotter
-
-
Iscar 1.125 Dia. 3XD Indexable Square Insert Coolant Thru Drill
1-1/8″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 3xD
-
Tungaloy 1.8125 Dia. 4XD Indexable Insert Drill
1.812″ TungSix-Drill Indexable insert drills, L/D=4, Flat cotter
-
Ingersoll 0.7188 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.719 (18.26 mm) Flat Bottom Square Insert Indexable Drill – 3:1|L:D Ratio – 3:1|
-
Tungaloy 38 mm Dia. 2XD Indexable Insert Drill
38mm TungSix-Drill Indexable insert drills, L/D=2, Flat cotter
-
Ingersoll 0.984 Dia. Bright 3XD Square Insert Indexable Coolant Thru Drill
0.984 (24.99 mm) Square Insert Indexable Drills|L:D Ratio – 3:1|
-
Ingersoll 1.3438 Dia. Bright 2XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.343 (34.11 mm) Square Insert Indexable Drills – Inch|L:D Ratio – 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Iscar 2.4803 Dia. DR Large Dia. Drills w/ Cartridges and One Flat Shank
2.48″ DR Large Diameter Drills (2.244-3.125″) with Cartridges and One Flat Shank
-
Ingersoll 0.9688 Dia. Bright 5XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.969 (24.61 mm) Square Insert Indexable Inch Drills|L:D Ratio – 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Tungaloy 45 mm Dia. 2XD Indexable Insert Drill
45mm TungSix-Drill Indexable insert drills, L/D=2, Flat cotter
-
Tungaloy 1.0000 Dia. 4XD Indexable Insert Drill
1″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 4, Flat cotter
-
Ingersoll 1.5938 Dia. Bright 5XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.594 (40.49 mm) Square Insert Indexable Inch Drills|L:D Ratio – 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Ingersoll 1.969 Dia. Bright 4XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.969 (50.01 mm) Square Insert Indexable Drills Inch|L:D Ratio – 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Ingersoll 1.3125 Dia. Bright 2XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.312 (33.32 mm) Square Insert Indexable Drills – Inch|L:D Ratio – 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Ingersoll 0.75 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.750 (19.05 mm) Flat Bottom Square Insert Indexable Drill – 3:1|L:D Ratio – 3:1|
-
Iscar 1.4375 Dia. 3XD Indexable Square Insert Coolant Thru Drill
1.437″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 3xD
-
Ingersoll 2.75 Dia. Bright 4XD Large Diameter Indexable Coolant Thru Drill
2.750 (69.85 mm) Large Diameter Indexable Drills|L:D Ratio – 4:1|
-
Tungaloy 42 mm Dia. 3XD Indexable Insert Drill
42mm TungDrillTwisted Indexable insert drills, L/D=3, Flat cotter
-
Ingersoll 1.5625 Dia. Bright 3XD Square Insert Indexable Coolant Thru Drill
1.562 (39.67 mm) Square Insert Indexable Drills|L:D Ratio – 3:1|
-
Ingersoll 1.4688 Dia. Bright 2XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.468 (37.29 mm) Square Insert Indexable Drills – Inch|L:D Ratio – 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Tungaloy 30 mm Dia. 4XD Indexable Insert Drill
30mm TungSix-Drill Indexable insert drills, L/D=4, Flat cotter
-
Tungaloy 1.1875 Dia. 3XD Indexable Insert Drill
1.187″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 3, Flat cotter