Indexable Drills
Showing 1–50 of 9153 results
-
Iscar 0.8346 Dia. Carbide TiAlN Exchangeable Drill Heads Coolant Thru
.835″ Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)
-
Tungaloy 26.4 mm Dia. 3XD Indexable Insert Drill
26.4mm TungSix-Drill Indexable insert drills, L/D=3, Flat cotter
-
Ingersoll 0.4685 Dia. 140 TIALN Replaceable Drill Tip Coolant Thru
0.4685 (11.90 mm) Gold Twist Replaceable Tips|Stainless Steel & Exoti
-
Iscar 0.7598 Dia. Carbide TiAlN Exchangeable Drill Heads Coolant Thru
.760″ Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)
-
Tungaloy 0.2520 Dia. TiAlN DMP Drill Head
0.252″ DrillMeister DMP Drill heads for indexable head drills. General purpose type.
-
Tungaloy 0.4133 Dia. Indexable Drill w/ Flanged Shank
0.413″ DrillMeister Indexable head drill with flanged shank
-
Iscar 0.8858 Dia. Carbide TiAlN 3XD, 5XD, 8XD Drill Head Coolant Thru
.886″ DCM Drill Heads for Cast Iron
-
Iscar 0.5551 Dia. Carbide TiAlN 3XD, 5XD, 8XD Drill Head Coolant Thru
.555″ General Use DCM Drill Heads
-
Ingersoll 1.374 Dia. 140 TIALN 3XD, 5XD, 8XD Replaceable Spade Tip Coolant Thru
1.3740 (34.90 mm) SpadeTwist Tip
-
Tungaloy 0.5394 Dia. TiAlN DMP Drill Head
0.5394″ DrillMeister DMP Drill heads for indexable head drills. General purpose type.
-
-
-
-
Ingersoll 1.1875 Dia. Bright 5XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.187 (30.15 mm) Square Insert Indexable Inch Drills|L:D Ratio – 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Iscar 0.8268 Dia. Carbide TiAlN 3XD, 5XD, 8XD Drill Head Coolant Thru
.827″ General Use DCM Drill Heads
-
Tungaloy 0.5709 Dia. Indexable Drill w/ Cylindrical Shank
0.571″ DrillMeister Indexable head drill with cylindrical shank
-
Iscar 0.3937 Dia. Carbide TiAlN Exchangeable Drill Heads Coolant Thru
.394″ Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)
-
Iscar 0.6562 Dia. Carbide TiAlN 3XD, 5XD, 8XD Drill Head Coolant Thru
.657″ General Use DCM Drill Heads
-
Tungaloy 12 mm Dia. Indexable Drill w/ Cylindrical Shank
12mm DrillMeister Indexable head drill with cylindrical shank
-
Tungaloy 0.6250 Dia. 2XD Indexable Insert Drill
5/8″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 2, Flat cotter
-
Tungaloy 0.4844 Dia. TiAlN DMC Drill Head
0.4843″ DrillMeister DMC Drill heads for indexable head drills for high accuracy drilling
-
Ingersoll 0.6299 Dia. 140 5XD Replaceable Tipped Drill Body Coolant Thru
0.6299 (16.0 mm) QwikTwist Body
-
Ingersoll 1.5354 Dia. 140 TIALN 3XD, 5XD, 8XD Replaceable Spade Tip Coolant Thru
1.5354 (39.00 mm) SpadeTwist Tip
-
-
-
Iscar 0.185 Dia. Carbide TiAlN Exchangeable Drill Heads Coolant Thru
.185″ Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)
-
Ingersoll 0.7676 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.768 (19.50 mm) Square Insert Indexable Drills Metric|L:D Ratio – 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|
-
Nine N9MT11T3CT2T H-NC9076 Carbide Indexable Insert, 0.276 in DC, 0.031 in CR
INDEXABLE MILLING / INDEXABLE DRILLING
-
Iscar 0.5079 Dia. Carbide TiAlN Exchangeable Drill Heads Coolant Thru
.508″ Exchangeable DCN Drill Heads, for Cast Iron (ISO K Materials)
-
Ingersoll 0.878 Dia. 140 TIALN Replaceable Drill Tip Coolant Thru
0.8780 (22.30 mm) Gold Twist Replaceable Tips|Steel Geometry & Genera
-
Ingersoll 0.4646 Dia. 140 TIALN Replaceable Drill Tip Coolant Thru
0.4646 (11.80 mm) Gold Twist Replaceable Tips|Stainless Steel & Exoti
-
-
-
-
Iscar 0.5276 Dia. Carbide TiAlN Double Margin Drill Heads Coolant Thru
.528″ Double Margin Drilling Heads for DCN Drills for Machining Cast Iron with High Surface Finish Results
-
Iscar 0.5827 Dia. Carbide TiAlN Exchangeable Flat Bottom Drill Head Coolant Thru
.583″ Exchangeable Flat Bottom DCN Drill Heads for Steel and Cast Iron (ISO P and ISO K Materials)
-
-
Iscar 0.6456 Dia. Carbide TiAlN Exchangeable Flat Bottom Drill Head Coolant Thru
.646″ Exchangeable Flat Bottom DCN Drill Heads for Steel and Cast Iron (ISO P and ISO K Materials)
-
Iscar 0.3268 Dia. Carbide TiAlN Double Margin Drill Heads Coolant Thru
.327″ Double Margin Drilling Heads for DCN Drills for Machining Cast Iron with High Surface Finish Results
-
Tungaloy 48 mm Dia. 3XD Indexable Insert Drill
48mm TungSix-Drill Indexable insert drills, L/D=3, Flat cotter
-
Ingersoll 1.5354 Dia. Bright 5XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.535 (39.00 mm) Square Insert Indexable Metric Drills|L:D Ratio – 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
Iscar 0.8976 Dia. Carbide TiAlN Double Margin Drill Heads Coolant Thru
.898″ Double Margin Drilling Heads for DCN Drills for Machining Cast Iron with High Surface Finish Results
-
Ingersoll 1.0511 Dia. 140 TIALN 3XD, 5XD, 8XD Replaceable Spade Tip Coolant Thru
1.0512 (26.70 mm) SpadeTwist Tip
-
Iscar 0.622 Dia. Carbide TiAlN Exchangeable Drill Heads Coolant Thru
.622″ Exchangeable DCN Drill Heads, for Cast Iron (ISO K Materials)
-
Ingersoll 0.4016 Dia. 140 TIALN Replaceable Drill Tip Coolant Thru
0.4016 (10.20 mm) Gold Twist Replaceable Tips|Stainless Steel & Exoti
-
Ingersoll 0.6968 Dia. 140 TIALN Replaceable Drill Tip Coolant Thru
0.6968 (17.70 mm) Gold Twist Replaceable Tips|Cast Iron|Grade IN2505|
-
Iscar 0.5394 Dia. Carbide TiAlN Exchangeable Drill Head Coolant Thru
.539″ Exchangeable Drilling Heads for Cast Iron
-
Tungaloy 1.5000 Dia. 3XD Indexable Insert Drill
1-1/2″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 3, Flat cotter
-
Tungaloy 29 mm Dia. 2XD Indexable Insert Drill
29mm TungSix-Drill Indexable insert drills, L/D=2, Flat cotter