Multi Insert
Showing 1–50 of 2555 results
-
-
-
-
-
-
Ingersoll 0.9062 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.906 (23.01 mm) Flat Bottom Square Insert Indexable Drill – 3:1|L:D Ratio – 3:1|
-
-
-
-
-
-
Tungaloy 51 mm Dia. 2XD Indexable Insert Drill
51mm TungSix-Drill Indexable insert drills, L/D=2, Flat cotter
-
-
Iscar 1.5625 Dia. 2XD Indexable Square Insert Coolant Thru Drill
1.562″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 2xD
-
Tungaloy 1.5625 Dia. 4XD Indexable Insert Drill
1.562″ TungSix-Drill Indexable insert drills, L/D=4, Flat cotter
-
-
-
-
Ingersoll 0.4921 Dia. Bright 2XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.492 (12.50 mm) Square Insert Indexable Drills – Metric|L:D Ratio – 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
-
Ingersoll 0.9688 Dia. Bright 3XD Square Insert Indexable Coolant Thru Drill
0.969 (24.61 mm) Square Insert Indexable Drills|L:D Ratio – 3:1|
-
-
Tungaloy 15.5 mm Dia. 3XD Indexable Insert Drill
15.5mm TungDrillTwisted Indexable insert drills, L/D=3, Flat cotter
-
Ingersoll 0.5312 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.531 (13.49 mm) Square Insert Indexable Drills Inch|L:D Ratio – 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
-
-
Ingersoll 0.6574 Dia. Bright 2XD Square Insert Indexable Coolant Thru Drill
0.657 (16.69 mm) Square Insert Indexable Drills|L:D Ratio – 2:1|
-
Ingersoll 1.5625 Dia. Bright 4XD Square Insert Indexable Coolant Thru Drill
1.562 (39.67 mm) Square Insert Indexable Drills|L:D Ratio – 4:1|
-
-
Tungaloy 1.0156 Dia. 3XD Indexable Insert Drill
1.062″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 3, Flat cotter
-
-
-
-
Iscar 1.25 Dia. 3XD Indexable Square Insert Coolant Thru Drill
1-1/4″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 3xD
-
-
-
-
Iscar 2.25 Dia. 2XD Indexable Square Insert Coolant Thru Drill
2-1/4″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 2xD
-
-
Tungaloy 26 mm Dia. 2XD Indexable Insert Drill
26mm TungSix-Drill Indexable insert drills, L/D=2, Flat cotter
-
-
-
Ingersoll 1.5 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.500 (38.10 mm) Square Insert Indexable Drills Inch|L:D Ratio – 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Ingersoll 3 Dia. Bright 2XD Large Diameter Indexable Coolant Thru Drill
3.000 (76.20 mm) Large Diameter Indexable Drills|L:D Ratio – 2:1|
-
-
Iscar 0.6693 Dia. Indexable Chamfering Drill Head Coolant Thru
0.669 Indexable Head Drills with Chamfering Inserts Mainly for Pre-Thread Holes
-
Tungaloy 31 mm Dia. 3XD Indexable Insert Drill
31mm TungSix-Drill Indexable insert drills, L/D=3, Flat cotter
-
Tungaloy 36 mm Dia. 3XD Indexable Insert Drill
36mm TungSix-Drill Indexable insert drills, L/D=3, Flat cotter