multi insert
Showing 1701–1750 of 1838 results
-
Iscar 2.4803 Dia. DR Large Dia. Drills w/ Cartridges and One Flat Shank
2.48″ DR Large Diameter Drills (2.244-3.125″) with Cartridges and One Flat Shank
-
Tungaloy 24 mm Dia. 3XD Indexable Insert Drill
24mm TungSix-Drill Indexable insert drills, L/D=3, Flat cotter
-
Tungaloy 25.5 mm Dia. 2XD Indexable Insert Drill
25.5mm TungDrillTwisted Indexable insert drills, L/D=2, Flat cotter
-
Ingersoll 1.75 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.750 (44.45 mm) Flat Bottom Square Insert Indexable Drill – 3:1|L:D Ratio – 3:1|
-
Tungaloy 19.5 mm Dia. 2XD Indexable Insert Drill
19.5mm TungDrillTwisted Indexable insert drills, L/D=2, Flat cotter
-
Ingersoll 2.125 Dia. Bright 2XD Large Diameter Indexable Coolant Thru Drill
2.125 (53.98 mm) Large Diameter Indexable Drills|L:D Ratio – 2:1|
-
Tungaloy 0.5625 Dia. 5XD Indexable Insert Drill
0.562″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 5, Flat cotter
-
Tungaloy 1.6875 Dia. 3XD Indexable Insert Drill
1.687″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 3, Flat cotter
-
Tungaloy 21 mm Dia. 5XD Indexable Insert Drill
21mm TungDrillTwisted Indexable insert drills, L/D=5, Flat cotter
-
Ingersoll 1.6875 Dia. Bright 3XD Square Insert Indexable Coolant Thru Drill
1.687 (42.85 mm) Square Insert Indexable Drills|L:D Ratio – 3:1|
-
-
Tungaloy 37 mm Dia. 2XD Indexable Insert Drill
37mm TungSix-Drill Indexable insert drills, L/D=2, Flat cotter
-
Ingersoll 0.8438 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.843 (21.41 mm) Flat Bottom Square Insert Indexable Drill – 3:1|L:D Ratio – 3:1|
-
-
Ingersoll 1.9375 Dia. Bright 3XD Square Insert Indexable Coolant Thru Drill
1.937 (49.20 mm) Square Insert Indexable Drills|L:D Ratio – 3:1|
-
Iscar 1.0313 Dia. 2XD Indexable Square Insert Coolant Thru Drill
1.031″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 2xD
-
Iscar 1.5 Dia. 3XD Indexable Square Insert Coolant Thru Drill
1-1/2″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 3xD
-
Tungaloy 43 mm Dia. 4XD Indexable Insert Drill
43mm TungSix-Drill Indexable insert drills, L/D=4, Flat cotter
-
Ingersoll 0.813 Dia. Bright 5XD Square Insert Indexable Coolant Thru Drill
0.813 (20.65 mm) Square Insert Indexable Drills|L:D Ratio – 5:1|
-
Iscar 2.9134 Dia. DR Large Dia. Drills w/ Cartridges and One Flat Shank
2.91″ DR Large Diameter Drills (2.244-3.125″) with Cartridges and One Flat Shank
-
Iscar 0.5315 Dia. 4XD Indexable Square Insert Coolant Thru Drill
0.531″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 4xD
-
-
Iscar 0.5625 Dia. 4XD Indexable Square Insert Coolant Thru Drill
0.562″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 4xD
-
Iscar 0.4134 Dia. Indexable Chamfering Drill Head Coolant Thru
0.413 Indexable Head Drills with Chamfering Inserts Mainly for Pre-Thread Holes
-
Ingersoll 1.5312 Dia. Bright 5XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.531 (38.89 mm) Square Insert Indexable Inch Drills|L:D Ratio – 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Tungaloy 22.5 mm Dia. 5XD Indexable Insert Drill
22.5mm TungDrillTwisted Indexable insert drills, L/D=5, Flat cotter
-
Tungaloy 50 mm Dia. 3XD Indexable Insert Drill
50mm TungDrillTwisted Indexable insert drills, L/D=3, Flat cotter
-
Ingersoll 1.2992 Dia. Bright 5XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.299 (33.00 mm) Square Insert Indexable Metric Drills|L:D Ratio – 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Tungaloy 0.8750 Dia. 4XD Indexable Insert Drill
7/8″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 4, Flat cotter
-
Ingersoll 1.063 Dia. Bright 4XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.063 (27.00 mm) Square Insert Indexable Drills Inch|L:D Ratio – 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Tungaloy 42 mm Dia. 2XD Indexable Insert Drill
42mm TungSix-Drill Indexable insert drills, L/D=2, Flat cotter
-
Iscar 1.281 Dia. 4XD Indexable Square Insert Coolant Thru Drill
1.281″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 4xD
-
Ingersoll 0.7087 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.709 (18.00 mm) Square Insert Indexable Drills Metric|L:D Ratio – 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|
-
Ingersoll 0.9375 Dia. Bright 2XD Square Insert Indexable Coolant Thru Drill
0.938 (23.83 mm) Square Insert Indexable Drills|L:D Ratio – 2:1|
-
-
Tungaloy 16.5 mm Dia. 4XD Indexable Insert Drill
16.5mm TungDrillTwisted Indexable insert drills, L/D=4, Flat cotter
-
Ingersoll 0.984 Dia. Bright 5XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.984 (24.99 mm) Square Insert Indexable Inch Drills|L:D Ratio – 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Iscar 0.6562 Dia. 3XD Indexable Square Insert Coolant Thru Drill
0.656″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 3xD
-
-
Tungaloy 1.2500 Dia. 5XD Indexable Insert Drill
1-1/4″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 5, Flat cotter
-
Ingersoll 0.5312 Dia. Bright 2XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.531 (13.49 mm) Square Insert Indexable Drills – Inch|L:D Ratio – 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Ingersoll 1.252 Dia. Bright 2XD Square Insert Indexable Coolant Thru Drill
1.252 (31.80 mm) Square Insert Indexable Drills|L:D Ratio – 2:1|
-
-
-
Iscar 0.8125 Dia. 3XD Indexable Square Insert Coolant Thru Drill
0.812″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 3xD
-
-
-
-
-
Tungaloy 23.5 mm Dia. 5XD Indexable Insert Drill
23.5mm TungDrillTwisted Indexable insert drills, L/D=5, Flat cotter