multi insert
Showing 1–50 of 1838 results
-
Iscar 2.2187 Dia. 2XD Indexable Square Insert Coolant Thru Drill
2.219″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 2xD
-
Tungaloy 2.0000 Dia. 5XD Indexable Insert Drill
2″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 5, Flat cotter
-
Tungaloy 25 mm Dia. 4XD Indexable Insert Drill
25mm TungSix-Drill Indexable insert drills, L/D=4, Flat cotter
-
Tungaloy 1.1250 Dia. 2XD Indexable Insert Drill
1-1/8″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 2, Flat cotter
-
Ingersoll 0.8438 Dia. Bright 5XD Square Insert Indexable Coolant Thru Drill
0.843 (21.41 mm) Square Insert Indexable Drills|L:D Ratio – 5:1|
-
Tungaloy 0.5625 Dia. 3XD Indexable Insert Drill
0.562″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 3, Flat cotter
-
Tungaloy 23.5 mm Dia. 2XD Indexable Insert Drill
23.5mm TungDrillTwisted Indexable insert drills, L/D=2, Flat cotter
-
Tungaloy 37 mm Dia. 4XD Indexable Insert Drill
37mm TungSix-Drill Indexable insert drills, L/D=4, Flat cotter
-
-
Ingersoll 1.6142 Dia. Bright 5XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.614 (41.00 mm) Square Insert Indexable Metric Drills|L:D Ratio – 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Ingersoll 1.3125 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.312 (33.32 mm) Flat Bottom Square Insert Indexable Drill – 3:1|L:D Ratio – 3:1|
-
Ingersoll 1.6142 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.614 (41.00 mm) Square Insert Indexable Drills Metric|L:D Ratio – 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|
-
-
Ingersoll 0.626 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.626 (15.90 mm) Square Insert Indexable Drills Inch|L:D Ratio – 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Iscar 0.7031 Dia. 4XD Indexable Square Insert Coolant Thru Drill
0.703″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 4xD
-
Ingersoll 1.1875 Dia. Bright 4XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.187 (30.15 mm) Square Insert Indexable Drills Inch|L:D Ratio – 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Ingersoll 0.9843 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.984 (25.00 mm) Square Insert Indexable Drills Metric|L:D Ratio – 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|
-
Tungaloy 51 mm Dia. 2XD Indexable Insert Drill
51mm TungSix-Drill Indexable insert drills, L/D=2, Flat cotter
-
Tungaloy 53 mm Dia. 2XD Indexable Insert Drill
53mm TungDrillTwisted Indexable insert drills, L/D=2, Flat cotter
-
Ingersoll 1.7323 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.732 (44.00 mm) Square Insert Indexable Drills Metric|L:D Ratio – 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|
-
Tungaloy 2.1250 Dia. 4XD Indexable Insert Drill
2-1/8″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 4, Flat cotter
-
Ingersoll 1 Dia. Bright 4XD Square Insert Indexable Coolant Thru Drill
1.000 (25.40 mm) Square Insert Indexable Drills|L:D Ratio – 4:1|
-
Ingersoll 0.813 Dia. Bright 2XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.813 (20.65 mm) Square Insert Indexable Drills – Inch|L:D Ratio – 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Ingersoll 2.875 Dia. Bright 3XD Large Diameter Indexable Coolant Thru Drill
2.875 (73.03 mm) Large Diameter Indexable Drills|L:D Ratio – 3:1|
-
-
Ingersoll 1.8504 Dia. Bright 5XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.850 (47.00 mm) Square Insert Indexable Metric Drills|L:D Ratio – 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Iscar 2 Dia. 4XD Indexable Square Insert Coolant Thru Drill
2″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 4xD
-
Tungaloy 0.5000 Dia. 4XD Indexable Insert Drill
1/2″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 4, Flat cotter
-
Ingersoll 0.563 Dia. Bright 2XD Square Insert Indexable Coolant Thru Drill
0.563 (14.30 mm) Square Insert Indexable Drills|L:D Ratio – 2:1|
-
Ingersoll 1.375 Dia. Bright 2XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.375 (34.93 mm) Square Insert Indexable Drills – Inch|L:D Ratio – 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Tungaloy 41 mm Dia. 3XD Indexable Insert Drill
41mm TungDrillTwisted Indexable insert drills, L/D=3, Flat cotter
-
Tungaloy 2.1250 Dia. 5XD Indexable Insert Drill
2-1/8″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 5, Flat cotter
-
Ingersoll 1.125 Dia. Bright 3XD Square Insert Indexable Coolant Thru Drill
1.125 (28.58 mm) Square Insert Indexable Drills|L:D Ratio – 3:1|
-
-
-
Ingersoll 0.5709 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.571 (14.50 mm) Square Insert Indexable Drills Metric|L:D Ratio – 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|
-
Tungaloy 21.5 mm Dia. 4XD Indexable Insert Drill
21.5mm TungDrillTwisted Indexable insert drills, L/D=4, Flat cotter
-
Iscar 1.3125 Dia. 4XD Indexable Square Insert Coolant Thru Drill
1.312″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 4xD
-
Ingersoll 1.8898 Dia. Bright 5XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.890 (48.00 mm) Square Insert Indexable Metric Drills|L:D Ratio – 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Ingersoll 0.689 Dia. Bright 5XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.689 (17.50 mm) Square Insert Indexable Metric Drills|L:D Ratio – 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Tungaloy 35 mm Dia. 3XD Indexable Insert Drill
35mm TungSix-Drill Indexable insert drills, L/D=3, Flat cotter
-
-
Tungaloy 18 mm Dia. 4XD Indexable Insert Drill
18mm TungDrillTwisted Indexable insert drills, L/D=4, Flat cotter
-
Ingersoll 1.9375 Dia. Bright 3XD Square Insert Indexable Coolant Thru Drill
1.937 (49.20 mm) Square Insert Indexable Drills|L:D Ratio – 3:1|
-
Ingersoll 1.811 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.811 (46.00 mm) Square Insert Indexable Drills Metric|L:D Ratio – 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|
-
Tungaloy 17.5 mm Dia. 4XD Indexable Insert Drill
17.5mm TungDrillTwisted Indexable insert drills, L/D=4, Flat cotter
-
Ingersoll 0.8465 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.847 (21.50 mm) Square Insert Indexable Drills Metric|L:D Ratio – 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|
-
Ingersoll 1.125 Dia. Bright 5XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.125 (28.58 mm) Square Insert Indexable Inch Drills|L:D Ratio – 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Ingersoll 1.8125 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.813 (46.05 mm) Square Insert Indexable Drills Inch|L:D Ratio – 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Ingersoll 0.906 Dia. Bright 3XD Square Insert Indexable Coolant Thru Drill
0.906 (23.01 mm) Square Insert Indexable Drills|L:D Ratio – 3:1|