multi insert
Showing 201–250 of 1838 results
-
Ingersoll 0.6263 Dia. Bright 2XD Square Insert Indexable Coolant Thru Drill
0.626 (15.90 mm) Square Insert Indexable Drills|L:D Ratio – 2:1|
-
Iscar 0.9844 Dia. 4XD Indexable Square Insert Coolant Thru Drill
0.984″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 4xD
-
Ingersoll 0.591 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.591 (15.01 mm) Square Insert Indexable Drills Metric|L:D Ratio – 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|
-
Iscar 0.748 Dia. Indexable Chamfering Drill Head Coolant Thru
0.748 Indexable Head Drills with Chamfering Inserts Mainly for Pre-Thread Holes
-
-
Ingersoll 0.7676 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.768 (19.50 mm) Square Insert Indexable Drills Metric|L:D Ratio – 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|
-
-
Ingersoll 0.937 Dia. Bright 2XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.937 (23.80 mm) Square Insert Indexable Drills – Inch|L:D Ratio – 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Ingersoll 0.6299 Dia. Bright 5XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.630 (16.00 mm) Square Insert Indexable Metric Drills|L:D Ratio – 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Tungaloy 32 mm Dia. 2XD Indexable Insert Drill
32mm TungDrillTwisted Indexable insert drills, L/D=2, Flat cotter
-
Ingersoll 2.625 Dia. Bright 4XD Large Diameter Indexable Coolant Thru Drill
2.625 (66.68 mm) Large Diameter Indexable Drills|L:D Ratio – 4:1|
-
-
Ingersoll 1.4062 Dia. Bright 4XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.406 (35.71 mm) Square Insert Indexable Drills Inch|L:D Ratio – 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Ingersoll 1.4375 Dia. Bright 5XD Square Insert Indexable Coolant Thru Drill
1.437 (36.50 mm) Square Insert Indexable Drills|L:D Ratio – 5:1|
-
-
-
-
Tungaloy 30 mm Dia. 2XD Indexable Insert Drill
30mm TungSix-Drill Indexable insert drills, L/D=2, Flat cotter
-
Tungaloy 13 mm Dia. 4XD Indexable Insert Drill
13mm TungDrillTwisted Indexable insert drills, L/D=4, Flat cotter
-
Tungaloy 32 mm Dia. 3XD Indexable Insert Drill
32mm TungSix-Drill Indexable insert drills, L/D=3, Flat cotter
-
-
Ingersoll 1.875 Dia. Bright 4XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.875 (47.63 mm) Square Insert Indexable Drills Inch|L:D Ratio – 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
Ingersoll 1.4688 Dia. Bright 3XD Square Insert Indexable Coolant Thru Drill
1.468 (37.29 mm) Square Insert Indexable Drills|L:D Ratio – 3:1|
-
-
Iscar 0.9062 Dia. 2XD Indexable Square Insert Coolant Thru Drill
0.906″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 2xD
-
Ingersoll 1.7812 Dia. Bright 3XD Square Insert Indexable Coolant Thru Drill
1.781 (45.24 mm) Square Insert Indexable Drills|L:D Ratio – 3:1|
-
Tungaloy 2.0000 Dia. 4XD Indexable Insert Drill
2″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 4, Flat cotter
-
Iscar 0.9062 Dia. 3XD Indexable Square Insert Coolant Thru Drill
0.906″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 3xD
-
Tungaloy 1.6875 Dia. 5XD Indexable Insert Drill
1.687″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 5, Flat cotter
-
Ingersoll 1.4688 Dia. Bright 4XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.468 (37.29 mm) Square Insert Indexable Drills Inch|L:D Ratio – 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Ingersoll 1.6535 Dia. Bright 5XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.654 (42.00 mm) Square Insert Indexable Metric Drills|L:D Ratio – 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Ingersoll 0.9062 Dia. Bright 4XD Square Insert Indexable Coolant Thru Drill
0.906 (23.01 mm) Square Insert Indexable Drills|L:D Ratio – 4:1|
-
Ingersoll 0.563 Dia. Bright 5XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.563 (14.30 mm) Square Insert Indexable Inch Drills|L:D Ratio – 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Tungaloy 33 mm Dia. 2XD Indexable Insert Drill
33mm TungDrillTwisted Indexable insert drills, L/D=2, Flat cotter
-
Ingersoll 2.5 Dia. Bright 2XD Large Diameter Indexable Coolant Thru Drill
2.500 (63.50 mm) Large Diameter Indexable Drills|L:D Ratio – 2:1|
-
Ingersoll 1.6875 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.687 (42.85 mm) Square Insert Indexable Drills Inch|L:D Ratio – 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Tungaloy 38 mm Dia. 4XD Indexable Insert Drill
38mm TungSix-Drill Indexable insert drills, L/D=4, Flat cotter
-
Ingersoll 1.024 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.024 (26.00 mm) Square Insert Indexable Drills Metric|L:D Ratio – 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|
-
Tungaloy 0.5312 Dia. 3XD Indexable Insert Drill
0.531″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 3, Flat cotter
-
Tungaloy 37 mm Dia. 4XD Indexable Insert Drill
37mm TungSix-Drill Indexable insert drills, L/D=4, Flat cotter
-
Iscar 0.7812 Dia. 3XD Indexable Square Insert Coolant Thru Drill
0.781″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 3xD
-
Ingersoll 1 Dia. Bright 2XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.000 (25.40 mm) Square Insert Indexable Drills – Inch|L:D Ratio – 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Ingersoll 0.6692 Dia. Bright 2XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.669 (17.00 mm) Square Insert Indexable Drills – Metric|L:D Ratio – 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Tungaloy 15 mm Dia. 3XD Indexable Insert Drill
15mm TungDrillTwisted Indexable insert drills with “TungCap” Exchangeable Shanks, L/D=3
-
Tungaloy 1.9375 Dia. 2XD Indexable Insert Drill
1.937″ TungSix-Drill Indexable insert drills, L/D=2, Whistle notch
-
Iscar 1.2187 Dia. 3XD Indexable Square Insert Coolant Thru Drill
1.219″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 3xD
-
Tungaloy 41 mm Dia. 3XD Indexable Insert Drill
41mm TungDrillTwisted Indexable insert drills, L/D=3, Flat cotter
-
-
Ingersoll 0.8425 Dia. Bright 2XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.843 (21.41 mm) Square Insert Indexable Drills – Inch|L:D Ratio – 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|