multi insert
Showing 1751–1800 of 1838 results
-
-
Ingersoll 1.625 Dia. Bright 2XD Square Insert Indexable Coolant Thru Drill
1.625 (41.28 mm) Square Insert Indexable Drills|L:D Ratio – 2:1|
-
Iscar 0.8125 Dia. 3XD Indexable Square Insert Coolant Thru Drill
0.812″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 3xD
-
Tungaloy 20 mm Dia. 2XD Indexable Insert Drill
20mm TungDrillTwisted Indexable insert drills, L/D=2, Flat cotter
-
Ingersoll 1.875 Dia. Bright 3XD Square Insert Indexable Coolant Thru Drill
1.875 (47.63 mm) Square Insert Indexable Drills|L:D Ratio – 3:1|
-
Ingersoll 1.969 Dia. Bright 5XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.969 (50.01 mm) Square Insert Indexable Inch Drills|L:D Ratio – 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
Tungaloy 20 mm Dia. 4XD Indexable Insert Drill
20mm TungDrillTwisted Indexable insert drills, L/D=4, Flat cotter
-
Ingersoll 1.5938 Dia. Bright 2XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.594 (40.49 mm) Square Insert Indexable Drills – Inch|L:D Ratio – 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Ingersoll 0.937 Dia. Bright 4XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.937 (23.80 mm) Square Insert Indexable Drills Inch|L:D Ratio – 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Ingersoll 1.6142 Dia. Bright 4XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.614 (41.00 mm) Square Insert Indexable Drills Metric|L:D Ratio – 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Ingersoll 1.7323 Dia. Bright 4XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.732 (44.00 mm) Square Insert Indexable Drills Metric|L:D Ratio – 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Ingersoll 0.9646 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.965 (24.50 mm) Square Insert Indexable Drills Metric|L:D Ratio – 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|
-
Iscar 1.281 Dia. 3XD Indexable Square Insert Coolant Thru Drill
1.281″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 3xD
-
Ingersoll 1.1811 Dia. Bright 2XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.181 (30.00 mm) Square Insert Indexable Drills – Metric|L:D Ratio – 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Ingersoll 1 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.000 (25.40 mm) Flat Bottom Square Insert Indexable Drill – 3:1|L:D Ratio – 3:1|
-
-
-
Tungaloy 21.5 mm Dia. 2XD Indexable Insert Drill
21.5mm TungSix-Drill Indexable insert drills, L/D=2, Flat cotter
-
Tungaloy 49 mm Dia. 5XD Indexable Insert Drill
49mm TungDrillTwisted Indexable insert drills, L/D=5, Flat cotter
-
Tungaloy 32 mm Dia. 4XD Indexable Insert Drill
32mm TungSix-Drill Indexable insert drills, L/D=4, Flat cotter
-
Ingersoll 0.9055 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.906 (23.00 mm) Square Insert Indexable Drills Metric|L:D Ratio – 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|
-
-
-
Iscar 0.315 Dia. Indexable Chamfering Drill Head Coolant Thru
0.315 Indexable Head Drills with Chamfering Inserts Mainly for Pre-Thread Holes
-
Ingersoll 1.4375 Dia. Bright 3XD Square Insert Indexable Coolant Thru Drill
1.437 (36.50 mm) Square Insert Indexable Drills|L:D Ratio – 3:1|
-
-
-
-
-
Tungaloy 1.0156 Dia. 4XD Indexable Insert Drill
1.062″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 4, Flat cotter
-
Ingersoll 0.4724 Dia. Bright 4XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.472 (11.99 mm) Square Insert Indexable Drills Metric|L:D Ratio – 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Iscar 0.8307 Dia. 2XD Indexable Drill Head Coolant Thru
0.866″ Indexable Insert Drills, Drilling Depth 2xD
-
Ingersoll 0.9688 Dia. Bright 4XD Square Insert Indexable Coolant Thru Drill
0.969 (24.61 mm) Square Insert Indexable Drills|L:D Ratio – 4:1|
-
Ingersoll 0.75 Dia. Bright 5XD Square Insert Indexable Coolant Thru Drill
0.750 (19.05 mm) Square Insert Indexable Drills|L:D Ratio – 5:1|
-
Tungaloy 2.0000 Dia. 4XD Indexable Insert Drill
2″ TungSix-Drill Indexable insert drills, L/D=4, Flat cotter
-
Ingersoll 0.7795 Dia. Bright 5XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.780 (19.81 mm) Square Insert Indexable Inch Drills|L:D Ratio – 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Ingersoll 0.7087 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.709 (18.00 mm) Square Insert Indexable Drills Metric|L:D Ratio – 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|
-
-
-
-
Tungaloy 16.5 mm Dia. 4XD Indexable Insert Drill
16.5mm TungDrillTwisted Indexable insert drills, L/D=4, Flat cotter
-
Ingersoll 2 Dia. Bright 2XD Square Insert Indexable Coolant Thru Drill
2.000 (50.80 mm) Square Insert Indexable Drills|L:D Ratio – 2:1|
-
Ingersoll 1.2519 Dia. Bright 5XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.252 (31.80 mm) Square Insert Indexable Inch Drills|L:D Ratio – 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Ingersoll 1.094 Dia. Bright 5XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.094 (27.79 mm) Square Insert Indexable Inch Drills|L:D Ratio – 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
Iscar 0.7812 Dia. 2XD Indexable Square Insert Coolant Thru Drill
0.781″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 2xD
-
Ingersoll 1.4961 Dia. Bright 2XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.496 (38.00 mm) Square Insert Indexable Drills – Metric|L:D Ratio – 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
Tungaloy 37 mm Dia. 2XD Indexable Insert Drill
37mm TungSix-Drill Indexable insert drills, L/D=2, Flat cotter