multi insert
Showing 1601–1650 of 1838 results
-
-
Tungaloy 33 mm Dia. 3XD Indexable Insert Drill
33mm TungSix-Drill Indexable insert drills, L/D=3, Flat cotter
-
-
Ingersoll 0.9449 Dia. Bright 4XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.945 (24.00 mm) Square Insert Indexable Drills Metric|L:D Ratio – 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Tungaloy 1.1250 Dia. 3XD Indexable Insert Drill
1-1/8″ TungSix-Drill Indexable insert drills, L/D=3, Whistle notch
-
Ingersoll 1.4567 Dia. Bright 5XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.457 (37.00 mm) Square Insert Indexable Metric Drills|L:D Ratio – 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
-
Ingersoll 1.1562 Dia. Bright 3XD Square Insert Indexable Coolant Thru Drill
1.156 (29.36 mm) Square Insert Indexable Drills|L:D Ratio – 3:1|
-
Ingersoll 0.6574 Dia. Bright 3XD Square Insert Indexable Coolant Thru Drill
0.657 (16.69 mm) Square Insert Indexable Drills|L:D Ratio – 3:1|
-
Tungaloy 41 mm Dia. 4XD Indexable Insert Drill
41mm TungSix-Drill Indexable insert drills, L/D=4, Flat cotter
-
-
-
Ingersoll 1.4567 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.457 (37.00 mm) Square Insert Indexable Drills Metric|L:D Ratio – 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|
-
Ingersoll 0.8858 Dia. Bright 4XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.886 (22.50 mm) Square Insert Indexable Drills Metric|L:D Ratio – 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
Ingersoll 1.625 Dia. Bright 5XD Square Insert Indexable Coolant Thru Drill
1.625 (41.28 mm) Square Insert Indexable Drills|L:D Ratio – 5:1|
-
Ingersoll 1.3438 Dia. Bright 2XD Square Insert Indexable Coolant Thru Drill
1.343 (34.11 mm) Square Insert Indexable Drills|L:D Ratio – 2:1|
-
Ingersoll 0.875 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.875 (22.23 mm) Flat Bottom Square Insert Indexable Drill – 3:1|L:D Ratio – 3:1|
-
-
Ingersoll 1.4375 Dia. Bright 3XD Square Insert Indexable Coolant Thru Drill
1.437 (36.50 mm) Square Insert Indexable Drills|L:D Ratio – 3:1|
-
Ingersoll 1.875 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.875 (47.63 mm) Square Insert Indexable Drills Inch|L:D Ratio – 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Tungaloy 1.1875 Dia. 4XD Indexable Insert Drill
1.187″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 4, Flat cotter
-
Iscar 0.4685 Dia. 2XD Indexable Square Insert Coolant Thru Drill
0.469″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 2xD
-
Ingersoll 0.984 Dia. Bright 2XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.984 (24.99 mm) Square Insert Indexable Drills – Inch|L:D Ratio – 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Tungaloy 26 mm Dia. 4XD Indexable Insert Drill
26mm TungDrillTwisted Indexable insert drills, L/D=4, Flat cotter
-
Ingersoll 1.4567 Dia. Bright 4XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.457 (37.00 mm) Square Insert Indexable Drills Metric|L:D Ratio – 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Ingersoll 0.6875 Dia. Bright 3XD Square Insert Indexable Coolant Thru Drill
0.688 (17.48 mm) Square Insert Indexable Drills|L:D Ratio – 3:1|
-
Ingersoll 0.5945 Dia. Bright 2XD Square Insert Indexable Coolant Thru Drill
0.594 (15.09 mm) Square Insert Indexable Drills|L:D Ratio – 2:1|
-
-
Ingersoll 0.5709 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.571 (14.50 mm) Square Insert Indexable Drills Metric|L:D Ratio – 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|
-
Ingersoll 1.4688 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.468 (37.29 mm) Flat Bottom Square Insert Indexable Drill – 3:1|L:D Ratio – 3:1|
-
Tungaloy 1.5000 Dia. 3XD Indexable Insert Drill
1-1/2″ TungSix-Drill Indexable insert drills, L/D=3, Whistle notch
-
-
Iscar 0.4134 Dia. Indexable Chamfering Drill Head Coolant Thru
0.413 Indexable Head Drills with Chamfering Inserts Mainly for Pre-Thread Holes
-
-
-
Tungaloy 25.8 mm Dia. 2XD Indexable Insert Drill
1.062″ TungSix-Drill Indexable insert drills, L/D=2, Flat cotter
-
Tungaloy 1.6875 Dia. 4XD Indexable Insert Drill
1.687″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 4, Flat cotter
-
-
Tungaloy 15 mm Dia. 4XD Indexable Insert Drill
15mm TungDrillTwisted Indexable insert drills, L/D=4, Flat cotter
-
Ingersoll 2.375 Dia. Bright 4XD Large Diameter Indexable Coolant Thru Drill
2.375 (60.33 mm) Large Diameter Indexable Drills|L:D Ratio – 4:1|
-
-
-
Iscar 0.875 Dia. 4XD Indexable Square Insert Coolant Thru Drill
7/8″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 4xD
-
Tungaloy 25.4 mm Dia. 2XD Indexable Insert Drill
1″ TungSix-Drill Indexable insert drills, L/D=2, Flat cotter
-
Tungaloy 54 mm Dia. 3XD Indexable Insert Drill
54mm TungSix-Drill Indexable insert drills, L/D=3, Flat cotter
-
Tungaloy 23.9 mm Dia. 3XD Indexable Insert Drill
23.9mm TungSix-Drill Indexable insert drills, L/D=3, Flat cotter
-
Tungaloy 1.5000 Dia. 4XD Indexable Insert Drill
1-1/2″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 4, Flat cotter
-
Ingersoll 1.1875 Dia. Bright 2XD Square Insert Indexable Coolant Thru Drill
1.187 (30.15 mm) Square Insert Indexable Drills|L:D Ratio – 2:1|