multi insert
Showing 1451–1500 of 1838 results
-
Tungaloy 21 mm Dia. 2XD Indexable Insert Drill
21mm TungSix-Drill Indexable insert drills, L/D=2, Flat cotter
-
Tungaloy 0.7500 Dia. 5XD Indexable Insert Drill
3/4″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 5, Flat cotter
-
Tungaloy 24.5 mm Dia. 3XD Indexable Insert Drill
24.5mm TungDrillTwisted Indexable insert drills, L/D=3, Flat cotter
-
Ingersoll 0.9375 Dia. Bright 3XD Square Insert Indexable Coolant Thru Drill
0.938 (23.83 mm) Square Insert Indexable Drills|L:D Ratio – 3:1|
-
Tungaloy 1.4375 Dia. 3XD Indexable Insert Drill
1.437″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 3, Flat cotter
-
Ingersoll 1.0937 Dia. Bright 5XD Square Insert Indexable Coolant Thru Drill
1.094 (27.79 mm) Square Insert Indexable Drills|L:D Ratio – 5:1|
-
Ingersoll 2.125 Dia. Bright 2XD Large Diameter Indexable Coolant Thru Drill
2.125 (53.98 mm) Large Diameter Indexable Drills|L:D Ratio – 2:1|
-
Ingersoll 1.7188 Dia. Bright 5XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.719 (43.66 mm) Square Insert Indexable Inch Drills|L:D Ratio – 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
Tungaloy 15 mm Dia. 2XD Indexable Insert Drill
15mm TungDrillTwisted Indexable insert drills, L/D=2, Flat cotter
-
Ingersoll 0.875 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.875 (22.23 mm) Flat Bottom Square Insert Indexable Drill – 3:1|L:D Ratio – 3:1|
-
-
-
Ingersoll 0.813 Dia. Bright 4XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.813 (20.65 mm) Square Insert Indexable Drills Inch|L:D Ratio – 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Ingersoll 0.937 Dia. Bright 4XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.937 (23.80 mm) Square Insert Indexable Drills Inch|L:D Ratio – 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
Ingersoll 1.7717 Dia. Bright 5XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.772 (45.00 mm) Square Insert Indexable Metric Drills|L:D Ratio – 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Iscar 1.875 Dia. 2XD Indexable Square Insert Coolant Thru Drill
1-7/8″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 2xD
-
-
Tungaloy 31 mm Dia. 2XD Indexable Insert Drill
31mm TungSix-Drill Indexable insert drills, L/D=2, Flat cotter
-
Iscar 0.6693 Dia. Indexable Chamfering Drill Head Coolant Thru
0.669 Indexable Head Drills with Chamfering Inserts Mainly for Pre-Thread Holes
-
Ingersoll 1.063 Dia. Bright 5XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.063 (27.00 mm) Square Insert Indexable Metric Drills|L:D Ratio – 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Tungaloy 16.5 mm Dia. 3XD Indexable Insert Drill
16.5mm TungDrillTwisted Indexable insert drills, L/D=3, Flat cotter
-
Ingersoll 1.6142 Dia. Bright 2XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.614 (41.00 mm) Square Insert Indexable Drills – Metric|L:D Ratio – 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Ingersoll 0.626 Dia. Bright 5XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.626 (15.90 mm) Square Insert Indexable Inch Drills|L:D Ratio – 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Iscar 0.6299 Dia. Indexable Chamfering Drill Head Coolant Thru
0.630 Indexable Head Drills with Chamfering Inserts Mainly for Pre-Thread Holes
-
Ingersoll 1.1562 Dia. Bright 4XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.156 (29.36 mm) Square Insert Indexable Drills Inch|L:D Ratio – 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
Ingersoll 1.75 Dia. Bright 4XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.750 (44.45 mm) Square Insert Indexable Drills Inch|L:D Ratio – 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Tungaloy 1.3125 Dia. 4XD Indexable Insert Drill
1.312″ TungSix-Drill Indexable insert drills, L/D=4, Flat cotter
-
-
Tungaloy 2.1250 Dia. 5XD Indexable Insert Drill
2-1/8″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 5, Flat cotter
-
Tungaloy 12.5 mm Dia. 5XD Indexable Insert Drill
12.5mm TungDrillTwisted Indexable insert drills, L/D=5, Flat cotter
-
-
Tungaloy 53 mm Dia. 2XD Indexable Insert Drill
53mm TungDrillTwisted Indexable insert drills, L/D=2, Flat cotter
-
Ingersoll 1.3125 Dia. Bright 2XD Square Insert Indexable Coolant Thru Drill
1.312 (33.32 mm) Square Insert Indexable Drills|L:D Ratio – 2:1|
-
Ingersoll 1.5748 Dia. Bright 4XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.575 (40.00 mm) Square Insert Indexable Drills Metric|L:D Ratio – 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Ingersoll 1.625 Dia. Bright 4XD Square Insert Indexable Coolant Thru Drill
1.625 (41.28 mm) Square Insert Indexable Drills|L:D Ratio – 4:1|
-
Ingersoll 1.693 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.693 (43.00 mm) Square Insert Indexable Drills Metric|L:D Ratio – 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|
-
-
-
Tungaloy 1.6875 Dia. 4XD Indexable Insert Drill
1.687″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 4, Flat cotter
-
Ingersoll 1.625 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.625 (41.28 mm) Flat Bottom Square Insert Indexable Drill – 3:1|L:D Ratio – 3:1|
-
Ingersoll 1.2188 Dia. Bright 2XD Square Insert Indexable Coolant Thru Drill
1.219 (30.96 mm) Square Insert Indexable Drills|L:D Ratio – 2:1|
-
Ingersoll 0.75 Dia. Bright 4XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.750 (19.05 mm) Square Insert Indexable Drills Inch|L:D Ratio – 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Tungaloy 1.2500 Dia. 4XD Indexable Insert Drill
1-1/4″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 4, Flat cotter
-
Ingersoll 0.9375 Dia. Bright 2XD Square Insert Indexable Coolant Thru Drill
0.938 (23.83 mm) Square Insert Indexable Drills|L:D Ratio – 2:1|
-
-
-
