multi insert
Showing 1351–1400 of 1838 results
-
Ingersoll 0.9062 Dia. Bright 4XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.906 (23.01 mm) Square Insert Indexable Drills Inch|L:D Ratio – 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Tungaloy 0.8125 Dia. 3XD Indexable Insert Drill
0.812″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 3, Flat cotter
-
Ingersoll 1.5354 Dia. Bright 2XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.535 (39.00 mm) Square Insert Indexable Drills – Metric|L:D Ratio – 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Ingersoll 1.7188 Dia. Bright 5XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.719 (43.66 mm) Square Insert Indexable Inch Drills|L:D Ratio – 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
-
Ingersoll 0.7188 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.719 (18.26 mm) Square Insert Indexable Drills Inch|L:D Ratio – 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
Ingersoll 1.6535 Dia. Bright 2XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.654 (42.00 mm) Square Insert Indexable Drills – Metric|L:D Ratio – 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Tungaloy 27 mm Dia. 5XD Indexable Insert Drill
27mm TungDrillTwisted Indexable insert drills, L/D=5, Flat cotter
-
Ingersoll 1.5748 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.575 (40.00 mm) Square Insert Indexable Drills Metric|L:D Ratio – 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|
-
-
Tungaloy 26 mm Dia. 4XD Indexable Insert Drill
26mm TungSix-Drill Indexable insert drills, L/D=4, Flat cotter
-
Ingersoll 0.748 Dia. Bright 5XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.748 (19.00 mm) Square Insert Indexable Metric Drills|L:D Ratio – 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Tungaloy 50 mm Dia. 3XD Indexable Insert Drill
50mm TungSix-Drill Indexable insert drills, L/D=3, Flat cotter
-
Tungaloy 17.5 mm Dia. 5XD Indexable Insert Drill
17.5mm TungDrillTwisted Indexable insert drills, L/D=5, Flat cotter
-
Ingersoll 0.75 Dia. Bright 4XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.750 (19.05 mm) Square Insert Indexable Drills Inch|L:D Ratio – 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Tungaloy 23 mm Dia. 3XD Indexable Insert Drill
23mm TungDrillTwisted Indexable insert drills, L/D=3, Flat cotter
-
Tungaloy 1.8750 Dia. 4XD Indexable Insert Drill
1-7/8″ TungSix-Drill Indexable insert drills, L/D=4, Flat cotter
-
Tungaloy 45 mm Dia. 2XD Indexable Insert Drill
45mm TungSix-Drill Indexable insert drills, L/D=2, Flat cotter
-
Iscar 1.875 Dia. 4XD Indexable Square Insert Coolant Thru Drill
1-7/8″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 4xD
-
Tungaloy 36 mm Dia. 3XD Indexable Insert Drill
36mm TungDrillTwisted Indexable insert drills, L/D=3, Flat cotter
-
Ingersoll 1.2205 Dia. Bright 5XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.221 (31.00 mm) Square Insert Indexable Metric Drills|L:D Ratio – 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Iscar 0.8438 Dia. 2XD Indexable Square Insert Coolant Thru Drill
0.844″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 2xD
-
Tungaloy 1.3125 Dia. 4XD Indexable Insert Drill
1.312″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 4, Flat cotter
-
Ingersoll 0.591 Dia. Bright 4XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.591 (15.01 mm) Square Insert Indexable Drills Inch|L:D Ratio – 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Tungaloy 30 mm Dia. 5XD Indexable Insert Drill
30mm TungDrillTwisted Indexable insert drills, L/D=5, Flat cotter
-
-
Ingersoll 1.024 Dia. Bright 5XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.024 (26.00 mm) Square Insert Indexable Metric Drills|L:D Ratio – 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
Ingersoll 0.591 Dia. Bright 5XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.591 (15.01 mm) Square Insert Indexable Inch Drills|L:D Ratio – 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Ingersoll 0.8268 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.827 (21.00 mm) Square Insert Indexable Drills Metric|L:D Ratio – 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|
-
-
-
Tungaloy 52 mm Dia. 4XD Indexable Insert Drill
52mm TungSix-Drill Indexable insert drills, L/D=4, Flat cotter
-
Tungaloy 30.5 mm Dia. 3XD Indexable Insert Drill
30.5mm TungSix-Drill Indexable insert drills, L/D=3, Flat cotter
-
Ingersoll 1.9375 Dia. Bright 3XD Square Insert Indexable Coolant Thru Drill
1.937 (49.20 mm) Square Insert Indexable Drills|L:D Ratio – 3:1|
-
Tungaloy 29 mm Dia. 4XD Indexable Insert Drill
29mm TungDrillTwisted Indexable insert drills, L/D=4, Flat cotter
-
Ingersoll 1.024 Dia. Bright 4XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.024 (26.00 mm) Square Insert Indexable Drills Metric|L:D Ratio – 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Tungaloy 34 mm Dia. 3XD Indexable Insert Drill
34mm TungSix-Drill Indexable insert drills, L/D=3, Flat cotter
-
Ingersoll 0.626 Dia. Bright 4XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.626 (15.90 mm) Square Insert Indexable Drills Inch|L:D Ratio – 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
Ingersoll 0.5312 Dia. Bright 2XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.531 (13.49 mm) Square Insert Indexable Drills – Inch|L:D Ratio – 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Ingersoll 1.6535 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.654 (42.00 mm) Square Insert Indexable Drills Metric|L:D Ratio – 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|
-
Ingersoll 1.0039 Dia. Bright 5XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.004 (25.50 mm) Square Insert Indexable Metric Drills|L:D Ratio – 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Ingersoll 0.75 Dia. Bright 2XD Square Insert Indexable Coolant Thru Drill
0.750 (19.05 mm) Square Insert Indexable Drills|L:D Ratio – 2:1|
-
Iscar 0.6562 Dia. 2XD Indexable Square Insert Coolant Thru Drill
0.656″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 2xD
-
Ingersoll 1.063 Dia. Bright 3XD Square Insert Indexable Coolant Thru Drill
1.063 (27.00 mm) Square Insert Indexable Drills|L:D Ratio – 3:1|
-
-
Tungaloy 1.5625 Dia. 5XD Indexable Insert Drill
1.562″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 5, Flat cotter