multi insert
Showing 1051–1100 of 1838 results
-
Ingersoll 1.2992 Dia. Bright 4XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.299 (33.00 mm) Square Insert Indexable Drills Metric|L:D Ratio – 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Ingersoll 1.969 Dia. Bright 2XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.969 (50.01 mm) Square Insert Indexable Drills – Inch|L:D Ratio – 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Tungaloy 1.6875 Dia. 2XD Indexable Insert Drill
1.687″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 2, Flat cotter
-
-
Tungaloy 25.4 mm Dia. 2XD Indexable Insert Drill
1″ TungSix-Drill Indexable insert drills, L/D=2, Flat cotter
-
-
Tungaloy 18 mm Dia. 3XD Indexable Insert Drill
18mm TungDrillTwisted Indexable insert drills, L/D=3, Flat cotter
-
Tungaloy 50 mm Dia. 3XD Indexable Insert Drill
50mm TungDrillTwisted Indexable insert drills, L/D=3, Flat cotter
-
Ingersoll 0.4724 Dia. Bright 5XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.472 (11.99 mm) Square Insert Indexable Metric Drills|L:D Ratio – 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Tungaloy 0.8750 Dia. 3XD Indexable Insert Drill
7/8″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 3, Flat cotter
-
Ingersoll 3.25 Dia. Bright 3XD Large Diameter Indexable Coolant Thru Drill
3.250 (82.55 mm) Large Diameter Indexable Drills|L:D Ratio – 3:1|
-
-
-
Tungaloy 38 mm Dia. 3XD Indexable Insert Drill
38mm TungSix-Drill Indexable insert drills, L/D=3, Flat cotter
-
-
Tungaloy 24.5 mm Dia. 3XD Indexable Insert Drill
24.5mm TungSix-Drill Indexable insert drills, L/D=3, Flat cotter
-
Tungaloy 0.8750 Dia. 2XD Indexable Insert Drill
7/8″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 2, Flat cotter
-
Iscar 0.9062 Dia. 4XD Indexable Square Insert Coolant Thru Drill
0.906″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 4xD
-
Tungaloy 1.0156 Dia. 3XD Indexable Insert Drill
1.062″ TungSix-Drill Indexable insert drills, L/D=3, Flat cotter
-
Tungaloy 35 mm Dia. 3XD Indexable Insert Drill
35mm TungSix-Drill Indexable insert drills, L/D=3, Flat cotter
-
-
Tungaloy 2.1250 Dia. 4XD Indexable Insert Drill
2-1/8″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 4, Flat cotter
-
-
Tungaloy 1.9375 Dia. 3XD Indexable Insert Drill
1.937″ TungSix-Drill Indexable insert drills, L/D=3, Whistle notch
-
-
Ingersoll 0.9062 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.906 (23.01 mm) Square Insert Indexable Drills Inch|L:D Ratio – 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
-
-
Ingersoll 1.4173 Dia. Bright 2XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.417 (36.00 mm) Square Insert Indexable Drills – Metric|L:D Ratio – 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Ingersoll 0.8858 Dia. Bright 4XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.886 (22.50 mm) Square Insert Indexable Drills Metric|L:D Ratio – 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Tungaloy 42 mm Dia. 3XD Indexable Insert Drill
42mm TungDrillTwisted Indexable insert drills, L/D=3, Flat cotter
-
Ingersoll 0.7188 Dia. Bright 3XD Square Insert Indexable Coolant Thru Drill
0.719 (18.26 mm) Square Insert Indexable Drills|L:D Ratio – 3:1|
-
Ingersoll 1.4062 Dia. Bright 5XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.406 (35.71 mm) Square Insert Indexable Inch Drills|L:D Ratio – 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
Iscar 0.8438 Dia. 4XD Indexable Square Insert Coolant Thru Drill
0.844″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 4xD
-
Ingersoll 0.8438 Dia. Bright 4XD Square Insert Indexable Coolant Thru Drill
0.843 (21.41 mm) Square Insert Indexable Drills|L:D Ratio – 4:1|
-
Iscar 0.374 Dia. Indexable Chamfering Drill Head Coolant Thru
0.374 Indexable Head Drills with Chamfering Inserts Mainly for Pre-Thread Holes
-
Ingersoll 1.4688 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.468 (37.29 mm) Square Insert Indexable Drills Inch|L:D Ratio – 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
-
-
Ingersoll 0.5945 Dia. Bright 5XD Square Insert Indexable Coolant Thru Drill
0.594 (15.09 mm) Square Insert Indexable Drills|L:D Ratio – 5:1|
-
-
Tungaloy 25 mm Dia. 3XD Indexable Insert Drill
25mm TungSix-Drill Indexable insert drills, L/D=3, Flat cotter
-
-
Iscar 0.4528 Dia. Indexable Chamfering Drill Head Coolant Thru
0.453 Indexable Head Drills with Chamfering Inserts Mainly for Pre-Thread Holes
-
Tungaloy 18.5 mm Dia. 5XD Indexable Insert Drill
18.5mm TungDrillTwisted Indexable insert drills, L/D=5, Flat cotter
-
Tungaloy 22.5 mm Dia. 3XD Indexable Insert Drill
22.5mm TungSix-Drill Indexable insert drills, L/D=3, Flat cotter
-
Ingersoll 0.75 Dia. Bright 5XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.750 (19.05 mm) Square Insert Indexable Inch Drills|L:D Ratio – 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|