multi insert
Showing 1001–1050 of 1838 results
-
Tungaloy 42 mm Dia. 3XD Indexable Insert Drill
42mm TungSix-Drill Indexable insert drills, L/D=3, Flat cotter
-
Iscar 1.125 Dia. 3XD Indexable Square Insert Coolant Thru Drill
1-1/8″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 3xD
-
Tungaloy 1.5625 Dia. 2XD Indexable Insert Drill
1.562″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 2, Flat cotter
-
Tungaloy 44 mm Dia. 3XD Indexable Insert Drill
44mm TungSix-Drill Indexable insert drills, L/D=3, Flat cotter
-
Ingersoll 0.813 Dia. Bright 5XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.813 (20.65 mm) Square Insert Indexable Inch Drills|L:D Ratio – 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Ingersoll 1.5938 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.594 (40.49 mm) Square Insert Indexable Drills Inch|L:D Ratio – 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Ingersoll 1.375 Dia. Bright 4XD Square Insert Indexable Coolant Thru Drill
1.375 (34.93 mm) Square Insert Indexable Drills|L:D Ratio – 4:1|
-
Tungaloy 18 mm Dia. 3XD Indexable Insert Drill
18mm TungDrillTwisted Indexable insert drills, L/D=3, Flat cotter
-
Tungaloy 41 mm Dia. 4XD Indexable Insert Drill
41mm TungDrillTwisted Indexable insert drills, L/D=4, Flat cotter
-
Ingersoll 0.75 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.750 (19.05 mm) Flat Bottom Square Insert Indexable Drill – 3:1|L:D Ratio – 3:1|
-
-
-
Ingersoll 0.875 Dia. Bright 4XD Square Insert Indexable Coolant Thru Drill
0.875 (22.23 mm) Square Insert Indexable Drills|L:D Ratio – 4:1|
-
Ingersoll 1.9375 Dia. Bright 2XD Square Insert Indexable Coolant Thru Drill
1.937 (49.20 mm) Square Insert Indexable Drills|L:D Ratio – 2:1|
-
-
Ingersoll 1.8125 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.813 (46.05 mm) Square Insert Indexable Drills Inch|L:D Ratio – 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Ingersoll 1 Dia. Bright 2XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.000 (25.40 mm) Square Insert Indexable Drills – Inch|L:D Ratio – 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Ingersoll 0.9688 Dia. Bright 4XD Square Insert Indexable Coolant Thru Drill
0.969 (24.61 mm) Square Insert Indexable Drills|L:D Ratio – 4:1|
-
Ingersoll 1.8898 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.890 (48.00 mm) Square Insert Indexable Drills Metric|L:D Ratio – 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|
-
-
Tungaloy 0.5000 Dia. 4XD Indexable Insert Drill
1/2″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 4, Flat cotter
-
Ingersoll 0.5 Dia. Bright 2XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.500 (12.70 mm) Square Insert Indexable Drills – Inch|L:D Ratio – 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
-
Ingersoll 1 Dia. Bright 3XD Square Insert Indexable Coolant Thru Drill
1.000 (25.40 mm) Square Insert Indexable Drills|L:D Ratio – 3:1|
-
Tungaloy 53 mm Dia. 2XD Indexable Insert Drill
53mm TungSix-Drill Indexable insert drills, L/D=2, Flat cotter
-
-
Tungaloy 19.5 mm Dia. 2XD Indexable Insert Drill
19.5mm TungDrillTwisted Indexable insert drills, L/D=2, Flat cotter
-
Tungaloy 48 mm Dia. 4XD Indexable Insert Drill
48mm TungSix-Drill Indexable insert drills, L/D=4, Flat cotter
-
Tungaloy 0.6250 Dia. 5XD Indexable Insert Drill
5/8″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 5, Flat cotter
-
Tungaloy 33 mm Dia. 3XD Indexable Insert Drill
33mm TungDrillTwisted Indexable insert drills, L/D=3, Flat cotter
-
Ingersoll 1.125 Dia. Bright 4XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.125 (28.58 mm) Square Insert Indexable Drills Inch|L:D Ratio – 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Ingersoll 1.4961 Dia. Bright 2XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.496 (38.00 mm) Square Insert Indexable Drills – Metric|L:D Ratio – 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Iscar 0.5937 Dia. 4XD Indexable Square Insert Coolant Thru Drill
0.594″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 4xD
-
Iscar 0.748 Dia. Indexable Chamfering Drill Head Coolant Thru
0.748 Indexable Head Drills with Chamfering Inserts Mainly for Pre-Thread Holes
-
Ingersoll 1.5944 Dia. Bright 4XD Square Insert Indexable Coolant Thru Drill
1.594 (40.49 mm) Square Insert Indexable Drills|L:D Ratio – 4:1|
-
Iscar 0.7031 Dia. 3XD Indexable Square Insert Coolant Thru Drill
0.703″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 3xD
-
Iscar 0.5315 Dia. 4XD Indexable Square Insert Coolant Thru Drill
0.531″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 4xD
-
Iscar 1.281 Dia. 4XD Indexable Square Insert Coolant Thru Drill
1.281″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 4xD
-
Iscar 0.9844 Dia. 4XD Indexable Square Insert Coolant Thru Drill
0.984″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 4xD
-
Iscar 0.937 Dia. 3XD Indexable Square Insert Coolant Thru Drill
0.937″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 3xD
-
Tungaloy 37 mm Dia. 4XD Indexable Insert Drill
37mm TungDrillTwisted Indexable insert drills, L/D=4, Flat cotter
-
-
Ingersoll 1.6875 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.687 (42.85 mm) Square Insert Indexable Drills Inch|L:D Ratio – 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Tungaloy 1.9375 Dia. 4XD Indexable Insert Drill
1.937″ TungSix-Drill Indexable insert drills, L/D=4, Flat cotter
-
-
Tungaloy 52 mm Dia. 4XD Indexable Insert Drill
52mm TungDrillTwisted Indexable insert drills, L/D=4, Flat cotter
-
-
Iscar 1.9375 Dia. 4XD Indexable Square Insert Coolant Thru Drill
1.937″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 4xD
-