multi insert
Showing 751–800 of 1838 results
-
Iscar 1.4375 Dia. 2XD Indexable Square Insert Coolant Thru Drill
1.437″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 2xD
-
-
-
Ingersoll 2 Dia. Bright 4XD Flat Bottom Square Insert Indexable Coolant Thru Drill
2.000 (50.80 mm) Square Insert Indexable Drills Inch|L:D Ratio – 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Iscar 0.7344 Dia. 2XD Indexable Square Insert Coolant Thru Drill
0.734″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 2xD
-
Tungaloy 45 mm Dia. 2XD Indexable Insert Drill
45mm TungSix-Drill Indexable insert drills, L/D=2, Flat cotter
-
-
Tungaloy 20.5 mm Dia. 2XD Indexable Insert Drill
20.5mm TungSix-Drill Indexable insert drills, L/D=2, Flat cotter
-
Iscar 1.125 Dia. 2XD Indexable Square Insert Coolant Thru Drill
1-1/8″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 2xD
-
Tungaloy 1.3125 Dia. 2XD Indexable Insert Drill
1.312″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 2, Flat cotter
-
Tungaloy 28 mm Dia. 3XD Indexable Insert Drill
28mm TungDrillTwisted Indexable insert drills, L/D=3, Flat cotter
-
-
-
Tungaloy 1.0630 Dia. 4XD Indexable Insert Drill
1.063″ TungSix-Drill Indexable insert drills, L/D=4, Flat cotter
-
-
Iscar 1.125 Dia. 3XD Indexable Square Insert Coolant Thru Drill
1-1/8″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 3xD
-
Iscar 1.2812 Dia. 2XD Indexable Square Insert Coolant Thru Drill
1.281″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 2xD
-
Ingersoll 1.2519 Dia. Bright 3XD Square Insert Indexable Coolant Thru Drill
1.252 (31.80 mm) Square Insert Indexable Drills|L:D Ratio – 3:1|
-
Ingersoll 0.9646 Dia. Bright 4XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.965 (24.50 mm) Square Insert Indexable Drills Metric|L:D Ratio – 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Tungaloy 23.5 mm Dia. 3XD Indexable Insert Drill
23.5mm TungSix-Drill Indexable insert drills, L/D=3, Flat cotter
-
-
Ingersoll 0.6574 Dia. Bright 5XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.658 (16.71 mm) Square Insert Indexable Inch Drills|L:D Ratio – 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Ingersoll 0.6692 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.669 (17.00 mm) Square Insert Indexable Drills Metric|L:D Ratio – 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|
-
Ingersoll 0.6299 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.630 (16.00 mm) Square Insert Indexable Drills Metric|L:D Ratio – 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|
-
-
Tungaloy 1.2500 Dia. 5XD Indexable Insert Drill
1-1/4″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 5, Flat cotter
-
Tungaloy 0.8125 Dia. 5XD Indexable Insert Drill
0.812″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 5, Flat cotter
-
-
-
Iscar 1.6875 Dia. 2XD Indexable Square Insert Coolant Thru Drill
1.687″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 2xD
-
-
Iscar 2.1875 Dia. 4XD Indexable Square Insert Coolant Thru Drill
2.187″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 4xD
-
-
Tungaloy 1.7500 Dia. 2XD Indexable Insert Drill
1-3/4″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 2, Flat cotter
-
Ingersoll 1.2519 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.252 (31.80 mm) Square Insert Indexable Drills Inch|L:D Ratio – 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Ingersoll 1.625 Dia. Bright 4XD Square Insert Indexable Coolant Thru Drill
1.625 (41.28 mm) Square Insert Indexable Drills|L:D Ratio – 4:1|
-
Iscar 0.7031 Dia. 2XD Indexable Square Insert Coolant Thru Drill
0.703″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 2xD
-
Ingersoll 1.375 Dia. Bright 4XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.375 (34.93 mm) Square Insert Indexable Drills Inch|L:D Ratio – 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Ingersoll 1.6142 Dia. Bright 5XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.614 (41.00 mm) Square Insert Indexable Metric Drills|L:D Ratio – 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Ingersoll 1.378 Dia. Bright 2XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.378 (35.00 mm) Square Insert Indexable Drills – Metric|L:D Ratio – 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
Tungaloy 1.2500 Dia. 4XD Indexable Insert Drill
1-1/4″ TungSix-Drill Indexable insert drills, L/D=4, Flat cotter
-
Tungaloy 28.5 mm Dia. 3XD Indexable Insert Drill
28.5mm TungSix-Drill Indexable insert drills, L/D=3, Flat cotter
-
Iscar 1.3125 Dia. 3XD Indexable Square Insert Coolant Thru Drill
1.312″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 3xD
-
Tungaloy 0.5000 Dia. 3XD Indexable Insert Drill
1/2″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 3, Flat cotter
-
Ingersoll 0.748 Dia. Bright 4XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.748 (19.00 mm) Square Insert Indexable Drills Metric|L:D Ratio – 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
Ingersoll 1.9375 Dia. Bright 4XD Square Insert Indexable Coolant Thru Drill
1.937 (49.20 mm) Square Insert Indexable Drills|L:D Ratio – 4:1|
-
Tungaloy 1.7500 Dia. 4XD Indexable Insert Drill
1-3/4″ TungSix-Drill Indexable insert drills, L/D=4, Flat cotter
-
Tungaloy 1.8125 Dia. 2XD Indexable Insert Drill
1.812″ TungSix-Drill Indexable insert drills, L/D=2, Whistle notch