multi insert
Showing 551–600 of 1838 results
-
Ingersoll 1.281 Dia. Bright 2XD Square Insert Indexable Coolant Thru Drill
1.281 (32.54 mm) Square Insert Indexable Drills|L:D Ratio – 2:1|
-
Ingersoll 0.5 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.500 (12.70 mm) Square Insert Indexable Drills Inch|L:D Ratio – 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Tungaloy 1.0156 Dia. 3XD Indexable Insert Drill
1.062″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 3, Flat cotter
-
Ingersoll 1.7188 Dia. Bright 4XD Square Insert Indexable Coolant Thru Drill
1.719 (43.66 mm) Square Insert Indexable Drills|L:D Ratio – 4:1|
-
Ingersoll 1.693 Dia. Bright 4XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.693 (43.00 mm) Square Insert Indexable Drills Metric|L:D Ratio – 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Iscar 2 Dia. 2XD Indexable Square Insert Coolant Thru Drill
2″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 2xD
-
-
-
Ingersoll 1.0937 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.094 (27.79 mm) Flat Bottom Square Insert Indexable Drill – 3:1|L:D Ratio – 3:1|
-
Tungaloy 17 mm Dia. 5XD Indexable Insert Drill
17mm TungDrillTwisted Indexable insert drills, L/D=5, Flat cotter
-
Tungaloy 16 mm Dia. 4XD Indexable Insert Drill
16mm TungDrillTwisted Indexable insert drills, L/D=4, Flat cotter
-
Iscar 0.75 Dia. 4XD Indexable Square Insert Coolant Thru Drill
3/4″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 4xD
-
Tungaloy 25 mm Dia. 4XD Indexable Insert Drill
25mm TungSix-Drill Indexable insert drills, L/D=4, Flat cotter
-
-
Tungaloy 15.5 mm Dia. 5XD Indexable Insert Drill
15.5mm TungDrillTwisted Indexable insert drills, L/D=5, Flat cotter
-
Iscar 0.5 Dia. 4XD Indexable Square Insert Coolant Thru Drill
1/2″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 4xD
-
Tungaloy 13.5 mm Dia. 2XD Indexable Insert Drill
13.5mm TungDrillTwisted Indexable insert drills, L/D=2, Flat cotter
-
Tungaloy 29 mm Dia. 4XD Indexable Insert Drill
29mm TungDrillTwisted Indexable insert drills, L/D=4, Flat cotter
-
Ingersoll 1.2188 Dia. Bright 2XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.219 (30.96 mm) Square Insert Indexable Drills – Inch|L:D Ratio – 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Ingersoll 0.6102 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.610 (15.50 mm) Square Insert Indexable Drills Metric|L:D Ratio – 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|
-
Ingersoll 1.0313 Dia. Bright 2XD Square Insert Indexable Coolant Thru Drill
1.031 (26.19 mm) Square Insert Indexable Drills|L:D Ratio – 2:1|
-
Ingersoll 1.281 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.281 (32.54 mm) Square Insert Indexable Drills Inch|L:D Ratio – 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Ingersoll 1.5312 Dia. Bright 4XD Square Insert Indexable Coolant Thru Drill
1.531 (38.89 mm) Square Insert Indexable Drills|L:D Ratio – 4:1|
-
Tungaloy 13 mm Dia. 2XD Indexable Insert Drill
13mm TungDrillTwisted Indexable insert drills, L/D=2, Flat cotter
-
Ingersoll 1 Dia. Bright 4XD Square Insert Indexable Coolant Thru Drill
1.000 (25.40 mm) Square Insert Indexable Drills|L:D Ratio – 4:1|
-
Ingersoll 1.1562 Dia. Bright 2XD Square Insert Indexable Coolant Thru Drill
1.156 (29.36 mm) Square Insert Indexable Drills|L:D Ratio – 2:1|
-
Tungaloy 40 mm Dia. 3XD Indexable Insert Drill
40mm TungDrillTwisted Indexable insert drills with “TungCap” Exchangeable Shanks, L/D=3
-
-
-
Ingersoll 1.5 Dia. Bright 2XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.500 (38.10 mm) Square Insert Indexable Drills – Inch|L:D Ratio – 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Tungaloy 1.9375 Dia. 3XD Indexable Insert Drill
1.937″ TungSix-Drill Indexable insert drills, L/D=3, Whistle notch
-
Tungaloy 2.0000 Dia. 2XD Indexable Insert Drill
2″ TungSix-Drill Indexable insert drills, L/D=2, Whistle notch
-
Ingersoll 1.1875 Dia. Bright 2XD Square Insert Indexable Coolant Thru Drill
1.187 (30.15 mm) Square Insert Indexable Drills|L:D Ratio – 2:1|
-
-
Tungaloy 0.7500 Dia. 3XD Indexable Insert Drill
3/4″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 3, Flat cotter
-
Ingersoll 0.9055 Dia. Bright 2XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.906 (23.00 mm) Square Insert Indexable Drills – Metric|L:D Ratio – 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Ingersoll 1.6142 Dia. Bright 5XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.614 (41.00 mm) Square Insert Indexable Metric Drills|L:D Ratio – 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Iscar 1.0313 Dia. 3XD Indexable Square Insert Coolant Thru Drill
1.031″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 3xD
-
Iscar 1.125 Dia. 3XD Indexable Square Insert Coolant Thru Drill
1-1/8″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 3xD
-
Tungaloy 22 mm Dia. 5XD Indexable Insert Drill
22mm TungDrillTwisted Indexable insert drills, L/D=5, Flat cotter
-
Ingersoll 2.875 Dia. Bright 3XD Large Diameter Indexable Coolant Thru Drill
2.875 (73.03 mm) Large Diameter Indexable Drills|L:D Ratio – 3:1|
-
-
Ingersoll 1.5 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.500 (38.10 mm) Square Insert Indexable Drills Inch|L:D Ratio – 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Tungaloy 31 mm Dia. 2XD Indexable Insert Drill
31mm TungSix-Drill Indexable insert drills, L/D=2, Flat cotter
-
Tungaloy 23.5 mm Dia. 4XD Indexable Insert Drill
23.5mm TungDrillTwisted Indexable insert drills, L/D=4, Flat cotter
-
Ingersoll 0.6875 Dia. Bright 4XD Square Insert Indexable Coolant Thru Drill
0.688 (17.48 mm) Square Insert Indexable Drills|L:D Ratio – 4:1|
-
Ingersoll 0.748 Dia. Bright 2XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.748 (19.00 mm) Square Insert Indexable Drills – Metric|L:D Ratio – 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Iscar 2.25 Dia. 2XD Indexable Square Insert Coolant Thru Drill
2-1/4″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 2xD
-
Ingersoll 1.8125 Dia. Bright 2XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.813 (46.05 mm) Square Insert Indexable Drills – Inch|L:D Ratio – 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
