Holemaking
Showing 46501–46550 of 47158 results
-
-
-
Tungaloy 0.8465 Dia. TiAlN DMP Drill Head
0.8465″ DrillMeister DMP Drill heads for indexable head drills. General purpose type.
-
-
-
YG-1 39 mm Dia. 132 Carbide TiN Throw Away Drill Insert
39.00MM CARBIDE (C5) THROW-AWAY DRILL Insert TIN-COATED
-
YG-1 0.2953 Dia. 130 Cobalt TiN Jobber Non-Coolant Thru Drill
7.5 HSS(M35) JOBBER, WORM PATTERN TYPE STRAIGHT SHANK GOLD-P DRILL FOR DEEP HOLES
-
-
-
-
Iscar 0.6024 Dia. Carbide TiAlN+TiN Exchangeable Drill Heads Coolant Thru
.602″ Exchangeable DCN Drill Heads, for Cast Iron (ISO K Materials)
-
Ingersoll 0.3543 Dia. 140 1.5XD Replaceable Tipped Drill Body Coolant Thru
0.3543 (9.0 mm)-0.3898 (9.9 mm) GoldTwist Body
-
HAM 4.3 mm Dia. 137 TA-C Coolant Thru Drill
4.30 mm 40XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
YG-1 0.5156 Dia. 132 Cobalt Hardslick Throw Away Drill Insert
33/64 PREMIUM COBALT(M48) SV-POINT THROW-AWAY DRILL Insert HARDSLICK COATED
-
-
YG-1 0.1094 Dia. 60 HSS Bright Center Non-Coolant Thru Drill
7/64 HSS(M2) 60 DEGREE POINT LONG LENGTH CENTER DRILL
-
Ingersoll 0.9844 Dia. 140 12XD Replaceable Tipped Drill Body Coolant Thru
0.9843 (25.000 mm)-1.0197 (25.900 mm) GoldTwist Body
-
YG-1 0.7656 Dia. 140 Carbide TiAlN 3XD, 5XD, 7XD Drill Insert Coolant Thru
49/64 I-DREAMDRILL Insert TIALN-COATED #D
-
-
Iscar 0.8386 Dia. Carbide TiAlN Exchangeable Drill Heads Coolant Thru
.839″ Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)
-
-
HAM 9.3 mm Dia. 140 TA-C Coolant Thru Drill
9.30 mm 3XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
Ingersoll 0.563 Dia. Bright 4XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.563 (14.30 mm) Square Insert Indexable Drills Inch|L:D Ratio – 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
-
-
Iscar 0.3307 Dia. Carbide TiAlN Double Margin Drill Heads Coolant Thru
.331″ Double Margin Drilling Heads for DCN Drills for Machining Steel with High Surface Finish Results
-
-
-
HAM 1.95 mm Dia. 140 TA Non-Coolant Thru Drill
1.95 mm Solid Carbide Twist Drill, 2 Flutes, TA Coated, Non-Coolant
-
-
YG-1 1.5312 Dia. 132 HSS Hardslick Throw Away Drill Insert
1-17/32 SUPER HSS(T15) SV-POINT THROW-AWAY DRILL Insert H-COATED
-
YG-1 1.4062 Dia. 118 HSS Oxide Morse Taper Shank Non-Coolant Thru Drill
1-13/32 HSS(M2) MORSE TAPER SHANK TWIST DRILLS
-
-
YG-1 9.8 mm Dia. 132 Carbide TiN Throw Away Drill Insert
9.80MM CARBIDE (C5) THROW-AWAY DRILL Insert TIN-COATED
-
YG-1 2.1875 Dia. 132 HSS TiAlN Throw Away Drill Insert
2-3/16 SUPER HSS(T15) SM POINT THROW-AWAY DRILL Insert TIALN COATED
-
-
-
-
ZCC 1534SU03C-0790 KDG303 0.3110 Dia. 140 TIALN 3XD Coolant Thru Drill
0.3110 DIA CARBIDE COOLANT DRILL
-
-
-
-
-
-
-
-
-
-
