Gun Drills
Showing 1–50 of 1326 results
-
Iscar 1.4567 Dia. Tube Coolant Thru Drill
1.457″ Deep Single Tube Drills with Internal Single Start Thread and a Brazed Tip (.571-2.559 dia.)
-
Iscar 0.563 Dia. Carbide TiAlN Double Margin Drill Heads Coolant Thru
.563″ Double Margin Drilling Heads for DCN Drills for Machining Steel with High Surface Finish Results
-
Iscar 1.0197 Dia. Carbide TiAlN Double Margin Drill Heads Coolant Thru
1.020″ Double Margin Drilling Heads for DCN Drills for Machining Steel with High Surface Finish Results
-
Iscar 9.2126 Dia. Drill Tube System Coolant Thru
9.213 – 9.685″ Drill Tubes – STS System – Outer Single Start Thread Connection
-
Iscar 0.7874 Dia. Tube Coolant Thru Drill
0.788″ Deep Double Tube Drills with External 4 Start Thread Carrying Triangular Inserts (.725-1.102 dia.)
-
Ingersoll 1.3125 Dia. Bright BTA Brazed Head DTS Coolant Thru
1.312 BTA Brazed Head|Double tube system|External 4-start thread|.725-2.559″ (18.4-65.0 mm)|
-
Iscar 0.6496 Dia. Tube Counterbore Coolant Thru
0.65″ Deep Single Tube Counterbore Without a Through Hole, Internal Single Start Thread and a Brazed Tip (.571-2.559 dia.)
-
-
Iscar 0.8594 Dia. Tube Counterbore Coolant Thru
0.859″ Deep Single Tube Counterbore with Through Hole, External 4 Start Thread and a Brazed Tip (.744-2.559 dia.)
-
Iscar 2.036 Dia. Tube Counterbore Coolant Thru
2.036″ Deep Single Tube Counterbore with Through Hole, External 4 Start Thread and a Cartridge (1.575-3.937 dia.)
-
Iscar 2.2126 Dia. Tube Coolant Thru Drill
2.213″ Deep Single Tube Drills with External 2 and 4 Start Thread and 2 or 3 Brazed Tips (.496-2.559 dia.)
-
Iscar 0.3819 Dia. Carbide TiAlN Double Margin Drill Heads Coolant Thru
.382″ Double Margin Drilling Heads for DCN Drills for Machining Steel with High Surface Finish Results
-
Iscar 4.213 Dia. Tube Coolant Thru Drill
4.213″ Deep Double Tube Drills with External 4 Start Thread and Cartridges (1.496-6.653 dia.)
-
Iscar 0.748 Dia. Tube Coolant Thru Drill
0.748″ Deep Single Tube Counterbore Without a Through Hole, Internal Single Start Thread and a Brazed Tip (.571-2.559 dia.)
-
-
-
Iscar 1.5591 Dia. Tube Drill System Coolant Thru
1.559-1.693″ Double-Tube Drill System with 4 Start Thread Connection Outer Tubes
-
-
Iscar 0.5625 Dia. Gundrill Coolant Thru
0.562″ Gundrills Carrying Triangular Inserts Featuring 3 Chip Splitting Cutting Edges and a Wiper for High Hole Surface Quality
-
Iscar 1.4252 Dia. Drill Tube System Coolant Thru
1.426 – 1.559″ Drill Tubes – STS System – Inner 4 Start Thread Connection
-
Ingersoll 0.6692 Dia. Bright BTA STS Tubes Coolant Thru
0.669 BTA STS Tubes|Single tube system|.433-2.205″ (11.0-56 mm)|
-
Iscar 0.3268 Dia. Carbide TiAlN Double Margin Drill Heads Coolant Thru
.327″ Double Margin Drilling Heads for DCN Drills for Machining Steel with High Surface Finish Results
-
Iscar 0.6811 Dia. Tube Counterbore Coolant Thru
0.68″ Deep Single Tube Counterbore Without a Through Hole, Internal Single Start Thread and a Brazed Tip (.571-2.559 dia.)
-
Iscar 0.3937 Dia. Carbide TiAlN Double Margin Drill Heads Coolant Thru
.394″ Double Margin Drilling Heads for DCN Drills for Machining Steel with High Surface Finish Results
-
Iscar 2.2441 Dia. Tube Counterbore Coolant Thru
2.244″ Deep Single Tube Counterbore with a Through Hole, Internal Single Start Thread and a Cartridge (1.575-4.370 dia.)
-
Iscar 0.75 Dia. Gundrill Coolant Thru
3/4″ Gundrills Carrying Triangular Inserts Featuring 3 Chip Splitting Cutting Edges and a Wiper for High Hole Surface Quality
-
Iscar 0.9724 Dia. Carbide TiAlN Double Margin Drill Heads Coolant Thru
.972″ Double Margin Drilling Heads for DCN Drills for Machining Steel with High Surface Finish Results
-
-
Ingersoll 2.25 Dia. Bright BTA Brazed STS Coolant Thru
2.25 BTA Brazed|Single tube system|External 4-start thread|.496-2.559″ (12.6-65.0 mm)|
-
Ingersoll 0.7165 Dia. Bright BTA Brazed STS Coolant Thru
0.718 BTA Brazed|Single tube system – crosshole|External 4-start thread|.496-2.559″ (12.6-65.0 mm)|
-
Iscar 1.2992 Dia. Tube Drill System Coolant Thru
1.311-1.425″ Double-Tube Drill System with 4 Start Thread Connection Outer Tubes
-
-
Iscar 0.6496 Dia. Tube Coolant Thru Drill
0.65″ Deep Single Tube Counterbore with Through Hole, Internal Single Start Thread and a Brazed Tip (.571-2.559 dia.)
-
Iscar 1.2598 Dia. Drill Tube System Coolant Thru
1.260 – 1.338″ Drill Tubes – STS System – Outer Single Start Thread Connection
-
Iscar 0.4961 Dia. Tube Coolant Thru Drill
0.496″ Deep Single Tube Drills with External 2 and 4 Start Thread and 2 or 3 Brazed Tips (.496-2.559 dia.)
-
Iscar 0.6562 Dia. Carbide TiAlN Double Margin Drill Heads Coolant Thru
.657″ Double Margin Drilling Heads for DCN Drills for Machining Steel with High Surface Finish Results
-
Iscar 0.8661 Dia. Tube Coolant Thru Drill
0.866″ Deep Single Tube Drills with External 4 Start Thread Connection Carrying Triangular Inserts (.630-1.102 dia.)
-
Iscar 1.1811 Dia. Tube Coolant Thru Drill
1.181″ Deep Single Tube Drills with Internal Single Start Thread and a Brazed Tip (.571-2.559 dia.)
-
Iscar 1.5591 Dia. Tube Counterbore Coolant Thru
1.559″ Deep Double Tube Counterbore without a Through Hole, External 4 Start Thread and a Brazed Tip (.725-2.559 dia.)
-
Ingersoll 0.4331 Dia. Bright BTA STS Tubes Coolant Thru
0.433 BTA STS Tubes|Single tube system|.433-2.205″ (11.0-56 mm)|
-
Iscar 1.5591 Dia. Drill Tube System Coolant Thru
1.559 – 1.693″ Drill Tubes – STS System – Inner 4 Start Thread Connection
-
Iscar 1.2205 Dia. Drill Tube System Coolant Thru
1.221 – 1.311″ Drill Tubes – STS System – Inner 4 Start Thread Connection
-
-
Iscar 1.3386 Dia. Tube Coolant Thru Drill
1.339″ Deep Single Tube Counterbore with Through Hole, Internal Single Start Thread and a Brazed Tip (.571-2.559 dia.)
-
Iscar 0.6811 Dia. Drill Tube System Coolant Thru
.680 – .709″ Drill Tubes – STS System – Outer Single Start Thread Connection
-
Iscar 0.9844 Dia. Tube Coolant Thru Drill
0.984″ Deep Single Tube Drills with Internal Single Start Thread and a Brazed Tip (.571-2.559 dia.)
-
Iscar 0.6299 Dia. 2XD SUMOCHAM Inserts and Modular Shank Gundrill Non-Coolant Thru
0.63″ Indexable SUMOCHAM Inserts and Modular Shank Gundrills
-
-
Iscar 0.7087 Dia. Carbide TiAlN Double Margin Drill Heads Coolant Thru
.709″ Double Margin Drilling Heads for DCN Drills for Machining Steel with High Surface Finish Results
-
Iscar 0.517 Dia. Tube Coolant Thru Drill
0.517″ Deep Single Tube Drills with External 2 and 4 Start Thread and 2 or 3 Brazed Tips (.496-2.559 dia.)