Holemaking
Showing 46651–46700 of 47158 results
-
-
-
-
-
-
-
HAM 8.4 mm Dia. 137 TA-C Coolant Thru Drill
8.40 mm 25XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
Tungaloy 31.8 mm Dia. 3XD Indexable Insert Drill
31.8mm TungSix-Drill Indexable insert drills, L/D=3, Flat cotter
-
-
YG-1 0.1360 Dia. 135 HSS TiN Straight Shank Jobber Non-Coolant Thru Drill
#29 HSS(M2) JOBBERS LENGTH STRAIGHT SHANK GOLD-P DRILLS
-
-
-
-
-
-
-
-
YG-1 12 mm Dia. 132 HSS TiN Throw Away Drill Insert
12.00MM SUPER HSS(T15) THROW AWAY DRILL Insert TIN-COATED
-
YG-1 64.01 mm Dia. 132 Cobalt Hardslick Throw Away Drill Insert
64.00MM PREMIUM COBALT(M48) SV-POINT THROW-AWAY DRILL Insert HARDSLICK COATED
-
-
HAM 9.55 mm Dia. 137 TA-C Coolant Thru Drill
9.55 mm 15XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
-
-
-
YG-1 28 mm Dia. 132 Carbide TiAlN Throw Away Drill Insert
28.00MM CARBIDE (C5) THROW-AWAY DRILL Insert TIALN-COATED
-
HAM 9.4 mm Dia. 140 TA-CN Coolant Thru Drill
9.40 mm 5XD Solid Carbide Niro Drill, 2 Flutes, TA-CN Coated, Coolant Thru
-
Iscar 0.8125 Dia. Gundrill Coolant Thru
0.812″ Gundrills Carrying Triangular Inserts Featuring 3 Chip Splitting Cutting Edges and a Wiper for High Hole Surface Quality
-
-
-
HAM 2.15 mm Dia. 135 TA Coolant Thru Drill
2.15 mm 20XD Solid Carbide Deep Hole Drill, 2 Flutes, TA Coated, Coolant Thru
-
Iscar 0.8346 Dia. Carbide TiAlN Exchangeable Drill Heads Coolant Thru
.835″ Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)
-
Iscar 0.5469 Dia. Carbide TiAlN 3XD, 5XD, 8XD Drill Head Coolant Thru
.547″ General Use DCM Drill Heads
-
-
-
-
-
HAM 4 mm Dia. 140 TA-CN Coolant Thru Drill
4.00 mm 5XD Solid Carbide Niro Drill, 2 Flutes, TA-CN Coated, Coolant Thru
-
-
-
Ingersoll 0.6263 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.626 (15.90 mm) Flat Bottom Square Insert Indexable Drill – 3:1|L:D Ratio – 3:1|
-
-
YG-1 13 mm Dia. 140 Carbide TiAlN+TiN 5XD Coolant Thru Drill
13.00MM CARBIDE DREAM DRILL HIGH FEED 5XD W/ COOLANT HOLE SLOT DIN 6537 (H-COATING)
-
YG-1 1.2500 Dia. 132 Cobalt Hardslick Throw Away Drill Insert
1-1/4 PREMIUM COBATL(M48) THROW-AWAY DRILL InsertS HARDSLICK COATED
-
YG-1 20.5 mm Dia. 132 HSS TiN Throw Away Drill Insert
20.50MM HSS(M4) THROW AWAY DRILL Insert TIN-COATED
-
Iscar 1.2598 Dia. Tube Coolant Thru Drill
1.26″ Deep Single Tube Drills with Internal Single Start Thread and a Brazed Tip (.571-2.559 dia.)
-
-
YG-1 0.8750 Dia. 132 Carbide TiAlN Throw Away Drill Insert
7/8 CARBIDE (C2) THROW-AWAY DRILL Insert TIALN-COATED
-
Iscar 0.7913 Dia. Carbide TiAlN Exchangeable Flat Bottom Drill Head Coolant Thru
.791″ Exchangeable Flat Bottom DCN Drill Heads for Steel and Cast Iron (ISO P and ISO K Materials)
-
