Online Catalog
Showing 9501–9550 of 9929 results
-
-
-
-
-
-
-
-
Ingersoll 1.625 Dia. Bright 2XD Square Insert Indexable Coolant Thru Drill
1.625 (41.28 mm) Square Insert Indexable Drills|L:D Ratio – 2:1|
-
-
Ingersoll 0.3937 in or 10.0000 mm High Feed Carbide Tialn 6 Flute End Mill
Size: 10.00MM x T06 x 10.00MM
-
-
-
-
-
Ingersoll 0.3750 in or 9.5250 mm Corner Radius Carbide Uncoated 3 Flute End Mill
Size: 0.375 x T06 x 0.5
-
-
Ingersoll 1.1811 Dia. 140 8XD Replaceable Tipped Drill Body Coolant Thru
1.1811 (30.0 mm)-1.2165 (30.9 mm) SpadeTwist Body
-
-
Ingersoll 0.2677 Dia. 140 TIALN Replaceable Drill Tip Coolant Thru
0.2680 (6.81 mm) Gold Twist Replaceable Tips|Stainless Steel & Exoti
-
Ingersoll 0.4133 Dia. 140 12XD Replaceable Tipped Drill Body Coolant Thru
0.4133 (10.498 mm)-0.4291 (10.899 mm) GoldTwist Body
-
-
-
-
-
-
Ingersoll 0.2598 Dia. 140 TIALN Replaceable Drill Tip Coolant Thru
0.2598 (6.60 mm) Gold Twist Replaceable Tips|Cast Iron|Grade IN2505|
-
-
-
-
-
Ingersoll 0.5118 Dia. 140 12XD Replaceable Tipped Drill Body Coolant Thru
0.5118 (13.000 mm)-0.5276 (13.400 mm) GoldTwist Body
-
-
-
Ingersoll 0.4685 Dia. 140 TIALN Replaceable Drill Tip Coolant Thru
0.4685 (11.90 mm) Gold Twist Replaceable Tips|Cast Iron|Grade IN2505|
-
Ingersoll 1.5 Dia. Bright 5XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.500 (38.10 mm) Square Insert Indexable Inch Drills|L:D Ratio – 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
-
Ingersoll TTEL31.8-10 T-CLAMP ULTRA+ External Turning & Grooving Tmax Holder, 7 in OAL
INDEXABLE THREADING GROOVE CUT OFF
-
-
-
-
-
-
-
-
-
-
-
-