Online Catalog
Showing 9801–9850 of 9929 results
-
-
-
Ingersoll 0.5709 Dia. 140 12XD Replaceable Tipped Drill Body Coolant Thru
0.5709 (14.500 mm)-0.5866 (14.900 mm) GoldTwist Body
-
-
-
-
-
-
-
Ingersoll TDT9.52E-0.80 TT9080 T-Clamp UltraPlus Insert, 0.375 in CW, 0.031 in RE
INDEXABLE THREADING GROOVE CUT OFF
-
-
-
-
Ingersoll 0.6732 Dia. 140 TIALN 3XD, 5XD, 8XD Replaceable Drill Tip Coolant Thru
0.6732 (17.10 mm) QwikTwist Tip Carbide
-
-
-
-
-
-
-
Ingersoll 1.875 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.875 (47.63 mm) Square Insert Indexable Drills Inch|L:D Ratio – 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
-
-
-
-
Ingersoll 0.9449 Dia. 140 TIALN 3XD, 5XD, 8XD Replaceable Drill Tip Coolant Thru
0.9449 (24.00 mm) QwikTwist Tip Carbide
-
-
Ingersoll 1.0551 Dia. 140 TIALN 3XD, 5XD, 8XD Replaceable Spade Tip Coolant Thru
1.0551 (26.80 mm) SpadeTwist Tip
-
-
-
-
Ingersoll 1.0000 in or 25.4000 mm Carbide Flute End Mill
Size: 12.00MM x T08 x 79.00MM – New EDP 2928086
-
Ingersoll 0.4646 Dia. 140 TIALN Replaceable Drill Tip Coolant Thru
0.4646 (11.80 mm) Gold Twist Replaceable Tips|Cast Iron|Grade IN2505|
-
-
-
-
-
-
Ingersoll 1.75 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.750 (44.45 mm) Flat Bottom Square Insert Indexable Drill – 3:1|L:D Ratio – 3:1|
-
-
-
-
-
Ingersoll 0.5945 Dia. Bright 5XD Square Insert Indexable Coolant Thru Drill
0.594 (15.09 mm) Square Insert Indexable Drills|L:D Ratio – 5:1|
-
Ingersoll 3 Dia. Bright 3XD Large Diameter Indexable Coolant Thru Drill
3.000 (76.20 mm) Large Diameter Indexable Drills|L:D Ratio – 3:1|
-
-
-
-