job shop
Showing 4851–4900 of 43236 results
-
HAM 6.35 mm Dia. 140 Bright Coolant Thru Drill
1/4″ 3XD Solid Carbide Multi Drill, 2 Straight Flutes, Bright, Coolant Thru
-
YG-1 1.4062 Dia. Series 3 Taper Shank-Straight Flute Spade Holder
SERIES 3 TAPER SHANK & STRAIGHT FLT SHORT LENGTH SPADE DRILL HOLDER
-
HAM 9.5 mm Dia. kevlar Bright Non-Coolant Thru Drill
9.50 mm Solid Carbide Twist Drill, 2 Flutes, Special Point Grind, Bright, Non-Coolant
-
-
-
YG-1 1.4062 Dia. Series 3 Straight Shank & Flute Spade Holder
SERIES 3 STRAIGHT SHANK & STRAIGHT FLUTE SHORT LENGTH SPADE DRILL HOLDER
-
HAM 5.8 mm Dia. 137 TA-C Coolant Thru Drill
5.80 mm 25XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
Tungaloy 0.9370 Dia. 4XD Indexable Insert Drill
0.938″ TungSix-Drill Indexable insert drills, L/D=4, Flat cotter
-
HAM 14 mm Dia. 140 TA-C Coolant Thru Drill
14.00 mm 3XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
-
-
YG-1 0.1562 Dia. 118 Carbide TiAlN Jobber Non-Coolant Thru Drill
5/32 CARBIDE JOBBER LENGTH TWIST DRILL TIALN COATED
-
-
Iscar 0.8937 Dia. Carbide TiAlN Double Margin Drill Heads Coolant Thru
.894″ Double Margin Drilling Heads for DCN Drills for Machining Cast Iron with High Surface Finish Results
-
YG-1 0.3750 Dia. 132 Carbide TiN Throw Away Drill Insert
3/8 CARBIDE (C3) THROW-AWAY DRILL Insert TIN-COATED
-
-
Advent Tool 4 Pitch AlTiN Full Acme Thread Mill Insert
External Thread, Neutral Face, 1.5″ LOC , 0.408″ Height, 0.13″Thick EDP# 50929, P/N ATM-410A4AFAV, 4-Full Acme, AlTiN Coating
-
Iscar 2.3858 Dia. Drill Tube System Coolant Thru
2.386 – 2.559″ Drill Tubes – STS System – Inner 4 Start Thread Connection
-
-
-
Tungaloy 0.7165 Dia. TiAlN DMC Drill Head
0.7165″ DrillMeister DMC Drill heads for indexable head drills for high accuracy drilling
-
HAM 5.6 mm Dia. 137 TA-C Coolant Thru Drill
5.60 mm 40XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
Iscar 0.5787 Dia. Carbide TiAlN Exchangeable Drill Head Coolant Thru
.579″ Exchangeable Drilling Heads for Cast Iron
-
-
-
-
-
-
-
YG-1 0.272 Dia. 140 Carbide TiAlN 3XD Coolant Thru Drill
.2720 CARBIDE DREAM DRILL INOX W/ COOLANT (3XD)
-
-
-
Advent Tool 6 Pitch TiAlN Stub Acme Thread Mill Insert
External Thread, 5? Positive Rake, 1.5″ LOC , 0.375″ Height, 0.13″Thick EDP# 51003, P/N ATM-410A6SAPZ, 6-Stub Acme, TiAlN Coating
-
HAM 10.3 mm Dia. 137 TA-C Coolant Thru Drill
10.30 mm 25XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
YG-1 38 mm Dia. 132 Carbide Hardslick Throw Away Drill Insert
38.00MM CARBIDE (C5) SV-POINT THROW-AWAY DRILL Insert HARDSLICK COATED
-
-
Advent Tool 6 Pitch TiN UN Thread Mill Insert
External Thread, Neutral Face, 1″ LOC , 0.31″ Height, 0.093″Thick EDP# 50011, P/N ATM-38A6C, 6-UN, TiN Coating
-
YG-1 19 mm Dia. 132 HSS TiAlN Throw Away Drill Insert
19.00MM SUPER HSS(T15) SM POINT THROW-AWAY DRILL Insert TIALN COATED
-
Advent Tool 20 Pitch TiAlN UN Thread Mill Insert
External Thread, Neutral Face, 1.5″ LOC , 0.31″ Height, 0.13″Thick EDP# 50487, P/N ATM-410A20Z, 20-UN, TiAlN Coating
-
-
HAM 2.6 mm Dia. 130 Bright Non-Coolant Thru Drill
2.60 mm Solid Carbide Twist Drill, 2 Flutes, AMS Geometry, Bright, Non-Coolant
-
Iscar 0.4331 Dia. 8XD Indexable Drill Head Coolant Thru
0.433″ Indexable Head Drills with Coolant Holes and One Flat Shank, Drilling Depth 8xD
-
-
-
-
YG-1 7.5 mm Dia. 140 Carbide TiAlN 25XD Coolant Thru Drill
7.50MM CARBIDE DREAM DRILLS MQL TYPE W/ COOLANT HOLES (25XD)
-
Iscar 0.7598 Dia. Carbide TiAlN Double Margin Drill Heads Coolant Thru
.760″ Double Margin Drilling Heads for DCN Drills for Machining Cast Iron with High Surface Finish Results
-