job shop
Showing 4351–4400 of 43236 results
-
-
-
Advent Tool 3 Pitch TiN Full Acme Thread Mill Insert
External Thread, Neutral Face, 1.5″ LOC , 0.408″ Height, 0.13″Thick EDP# 50912, P/N ATM-410A3AFAC, 3-Full Acme, TiN Coating
-
-
HAM 10.9 mm Dia. 137 TA-C Coolant Thru Drill
10.90 mm 15XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
Iscar 1.8504 Dia. Drill Tube System Coolant Thru
1.850 – 2.047″ Drill Tubes – STS System – Outer Single Start Thread Connection
-
YG-1 17.1 mm Dia. 140 Carbide TiAlN 5XD Coolant Thru Drill
17.10MM CARBIDE DREAM DRILL INOX W/ COOLANT (5XD)
-
ZCC 1534SU03C-0680 KDG303 0.2677 Dia. 140 TIALN 3XD Coolant Thru Drill
0.2677 DIA CARBIDE COOLANT DRILL
-
YG-1 100 mm Dia. 144 HSS Hardslick Throw Away Drill Insert
100.00MM SUPER HSS(T15) SV-POINT THROW-AWAY DRILL Insert HARDSLICK COATED
-
-
-
YG-1 0.6562 Dia. 132 HSS Hardslick Throw Away Drill Insert
21/32 SUPER HSS(T15) SV-POINT THROW-AWAY DRILL Insert H-COATED
-
YG-1 16.5 mm Dia. 140 Carbide TiCN 3XD, 5XD, 7XD Drill Insert Coolant Thru
16.50MM I-DREAMDRILL Insert INOX TICN-COATED #C
-
Iscar 0.7716 Dia. Carbide TiAlN Exchangeable Flat Bottom Drill Head Coolant Thru
.772″ Exchangeable Flat Bottom DCN Drill Heads for Steel and Cast Iron (ISO P and ISO K Materials)
-
Iscar 0.4724 Dia. Carbide TiAlN Double Margin Drill Heads Coolant Thru
.472″ Double Margin Drilling Heads for DCN Drills for Machining Cast Iron with High Surface Finish Results
-
Advent Tool 18 Pitch Bright NPSF Thread Mill Insert
External Thread, Neutral Face, 1″ LOC , 0.25″ Height, 0.093″Thick EDP# 51331, P/N ATM-38A18NPSF, 18-NPSF, Uncoated
-
-
HAM 2.3 mm Dia. 135 TA Coolant Thru Drill
2.30 mm 20XD Solid Carbide Deep Hole Drill, 2 Flutes, TA Coated, Coolant Thru
-
YG-1 0.4375 Dia. Series Z Flanged Straight Shank-Straight Flute Spade Holder
SERIES Z FLANGED STRAIGHT SHANK / FLUTE SHORT LENGTH HOLDER
-
-
YG-1 0.2500 Dia. 180 Flat Bottom Carbide TiAlN 2XD Non-Coolant Thru Drill
1/4 DREAM DRILL FLAT BOTTOM DRILL W/O COOLANT HOLE (2XD)
-
-
-
YG-1 2.9062 Dia. 144 HSS TiN Throw Away Drill Insert
2-29/32 HSS(M4) THROW AWAY DRILL Insert TIN-COATED
-
Advent Tool 6.00 mm Pitch Bright ISO Thread Mill Insert
External Thread, 5? Positive Rake, 1.5″ LOC , 0.375″ Height, 0.13″Thick EDP# 50729, P/N ATM-410A6.0AMMP, 6.0-ISO, Uncoated
-
HAM 12.75 mm Dia. 140 TA-CN Coolant Thru Drill
12.75 mm 5XD Solid Carbide Niro Drill, 2 Flutes, TA-CN Coated, Coolant Thru
-
-
-
-
HAM 1.8 mm Dia. 135 TA Coolant Thru Drill
1.80 mm 20XD Solid Carbide Deep Hole Drill, 2 Flutes, TA Coated, Coolant Thru
-
-
Iscar 0.5709 Dia. Carbide TiAlN+TiN Exchangeable Drill Heads Coolant Thru
.571″ Exchangeable DCN Drill Heads, for Cast Iron (ISO K Materials)
-
-
Iscar 0.4844 Dia. Carbide TiAlN Exchangeable Self-Centering Drill Head Coolant Thru
.484″ Exchangeable DCN Drill Self-Centering Heads for Alloy Steel and Cast Iron
-
-
-
-
-
Iscar 1.2598 Dia. Tube Coolant Thru Drill
1.26″ Deep Single Tube Drills with Internal Single Start Thread (.984-2.559 dia.)
-
-
-
Tungaloy 1.3125 Dia. 4XD Indexable Insert Drill
1.312″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 4, Flat cotter
-
YG-1 10.5 mm Dia. 132 HSS TiN Throw Away Drill Insert
10.50MM SUPER HSS(T15) THROW AWAY DRILL Insert TIN-COATED
-
Advent Tool 8 Pitch TiN NPS Thread Mill Insert
External Thread, 5? Positive Rake, 1.5″ LOC , 0.375″ Height, 0.13″Thick EDP# 51320, P/N ATM-410A8NPSPC, 8-NPS, TiN Coating
-
-
-
-
YG-1 0.4375 Dia. 140 Carbide TiAlN+TiN 5XD Coolant Thru Drill
7/16 CARBIDE DREAM DRILL HIGH FEED 5XD W/ COOLANT HOLE SLOT (H-COATING)
-
YG-1 1.3437 Dia. 132 Carbide TiAlN Throw Away Drill Insert
1-11/32 CARBIDE (C2) THROW-AWAY DRILL Insert TIALN-COATED
-
Ingersoll 0.3125 Dia. 140 Bright Replaceable Drill Tip Coolant Thru
0.3125 (7.94 mm) ALUMINIUM/PLASTIC