job shop
Showing 43051–43100 of 43236 results
-
-
-
YG-1 1.4375 Dia. 132 HSS TiN Throw Away Drill Insert
1-7/16 HSS(M4) THROW AWAY DRILL Insert TIN-COATED
-
-
-
-
YG-1 0.9062 Dia. 132 Carbide TiAlN Throw Away Drill Insert
29/32 CARBIDE (C2) THROW-AWAY DRILL Insert TIALN-COATED
-
-
HAM 9.13 mm Dia. 140 TA-C Coolant Thru Drill
23/64″ 5XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
YG-1 30.5 mm Dia. 140 Carbide TiCN 3XD, 5XD, 7XD Drill Insert Coolant Thru
30.50MM I-DREAMDRILL Insert INOX TICN-COATED #J
-
-
YG-1 1.5625 Dia. 132 Carbide TiN Throw Away Drill Insert
1-9/16 CARBIDE (C2) THROW-AWAY DRILL Insert TiN-COATED
-
-
-
-
HAM 12.1 mm Dia. 137 TA-C Coolant Thru Drill
12.10 mm 15XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
Iscar 0.685 Dia. Carbide TiAlN 3XD, 5XD, 8XD Drill Head Coolant Thru
.685″ DCM Drill Heads for Cast Iron
-
-
-
Iscar 2.036 Dia. Tube Coolant Thru Drill
2.036″ Deep Single Tube Drills with External 2 and 4 Start Thread and 2 or 3 Brazed Tips (.496-2.559 dia.)
-
-
YG-1 4.5 mm Dia. 140 Carbide TiAlN 10XD Coolant Thru Drill
4.50MM CARBIDE DREAM DRILLS MQL TYPE W/ COOLANT HOLES (10XD)
-
YG-1 44 mm Dia. 132 Carbide TiAlN Throw Away Drill Insert
44.00MM CARBIDE (C2) THROW-AWAY DRILL Insert TIALN-COATED
-
-
-
HAM 3.4 mm Dia. 140 TA-C Non-Coolant Thru Drill
3.40 mm 5XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Non-Coolant
-
Iscar 0.6456 Dia. Carbide TiAlN Double Margin Drill Heads Coolant Thru
.646″ Double Margin Drilling Heads for DCN Drills for Machining Cast Iron with High Surface Finish Results
-
YG-1 2.9688 Dia. 144 HSS Hardslick Throw Away Drill Insert
2-31/32 SUPER HSS(T15) SV-POINT THROW-AWAY DRILL Insert HARDSLICK COATED
-
Tungaloy 0.4844 Dia. TiAlN DMP Drill Head
0.4843″ DrillMeister DMP Drill heads for indexable head drills. General purpose type.
-
Iscar 0.748 Dia. Carbide TiAlN Double Margin Drill Heads Coolant Thru
.748″ Double Margin Drilling Heads for DCN Drills for Machining Cast Iron with High Surface Finish Results
-
-
YG-1 0.3594 Dia. 130 Cobalt TiCN Parabolic Taper Non-Coolant Thru Drill
23/64 HSSCo5 PARABOLIC FLUTE TAPER LENGTH STRAIGHT SHANK DRILL TICN COATED
-
-
-
Tungaloy 1.5000 Dia. 3XD Indexable Insert Drill
1-1/2″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 3, Flat cotter
-
YG-1 13.5 mm Dia. 140 Carbide TiAlN 10XD Coolant Thru Drill
13.50MM CARBIDE DREAM DRILLS MQL TYPE W/ COOLANT HOLES (10XD)
-
YG-1 29 mm Dia. 132 HSS Hardslick Throw Away Drill Insert
29.00MM SUPER HSS(T15) THROW-AWAY DRILL Insert HARDSLICK COATED
-
Iscar 2.2441 Dia. Drill Tube System Coolant Thru
2.244 – 2.401″ Drill Tubes – STS System – Outer Single Start Thread Connection
-
-
-
YG-1 0.7676 – 0.7870 Dia. 7XD Flanged Shank Drill Holder (I-Dream)
.7677 MIN DIA 0.787 MAX DIA I-DREAM DRILL HOLDER, FLANGED SHANK (7XD)
-
-
-
-
-
-
-
-
