job shop
Showing 38501–38550 of 43236 results
-
HAM 7.2 mm Dia. 140 TA-CN Coolant Thru Drill
7.20 mm 5XD Solid Carbide Niro Drill, 2 Flutes, TA-CN Coated, Coolant Thru
-
-
Advent Tool 2.00 mm Pitch AlTiN ISO Thread Mill Insert
External Thread, 5? Positive Rake, 1.5″ LOC , 0.31″ Height, 0.13″Thick EDP# 50809, P/N ATM-410A2.0MMPV, 2.0-ISO, AlTiN Coating
-
-
-
-
Iscar 2.0469 Dia. Tube Counterbore Coolant Thru
2.047″ Deep Single Tube Counterbore with Through Hole, Internal Single Start Thread and a Brazed Tip (.571-2.559 dia.)
-
HAM 11.51 mm Dia. 140 TA-CN Non-Coolant Thru Drill
29/64″ 3XD Solid Carbide Niro Drill, 2 Flutes, TA-CN Coated, Non-Coolant
-
Advent Tool 14 Pitch AlTiN NPSF Thread Mill Insert
External Thread, 5? Positive Rake, 1.5″ LOC , 0.25″ Height, 0.093″Thick EDP# 51369, P/N ATM-38B14NPSFPV, 14-NPSF, AlTiN Coating
-
Carmex 2.743 mm Cut Dia. M3.5 x 0.6 mm AlTiN Metric Thread Mill
0.108 CUTTER DIA THREAD MILL 6 mMSHANK 0.6MMPITCH 2.3 OAL
-
Advent Tool 1.00 mm Pitch AlTiN ISO Thread Mill Insert
External Thread, 5? Positive Rake, 1.5″ LOC , 0.31″ Height, 0.13″Thick EDP# 50845, P/N ATM-410A1.0MMPV, 1.0-ISO, AlTiN Coating
-
-
YG-1 1.7187 Dia. 118 HSS Oxide Morse Taper Shank Non-Coolant Thru Drill
1-23/32 HSS(M2) MORSE TAPER SHANK TWIST DRILLS
-
-
-
-
-
Iscar 1.063 Dia. Carbide TiAlN Exchangeable Drill Heads Coolant Thru
1.063″ Exchangeable DCN Drill Heads, for Cast Iron (ISO K Materials)
-
-
-
Advent Tool 12 Pitch TiN Full Acme Thread Mill Insert
External Thread, Neutral Face, 1.5″ LOC , 0.31″ Height, 0.13″Thick EDP# 50904, P/N ATM-410A12FAC, 12-Full Acme, TiN Coating
-
-
-
-
-
HAM 10.6 mm Dia. 137 TA-C Coolant Thru Drill
10.60 mm 30XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
-
Iscar 0.7284 Dia. Carbide TiAlN Exchangeable Flat Bottom Drill Head Coolant Thru
.728″ Exchangeable Flat Bottom DCN Drill Heads for Steel and Cast Iron (ISO P and ISO K Materials)
-
Iscar 0.4331 Dia. Carbide TiAlN Double Margin Drill Heads Coolant Thru
.433″ Double Margin Drilling Heads for DCN Drills for Machining Cast Iron with High Surface Finish Results
-
Iscar 0.3189 Dia. Carbide TiAlN Double Margin Drill Heads Coolant Thru
.319″ Double Margin Drilling Heads for DCN Drills for Machining Cast Iron with High Surface Finish Results
-
-
-
Iscar 0.5551 Dia. Tube Coolant Thru Drill
0.556″ Deep Single Tube Drills with External 2 and 4 Start Thread and 2 or 3 Brazed Tips (.496-2.559 dia.)
-
-
Advent Tool 18 Pitch Bright NPSF Thread Mill Insert
External Thread, 5? Positive Rake, 1.5″ LOC , 0.25″ Height, 0.093″Thick EDP# 51359, P/N ATM-38B18NPSFP, 18-NPSF, Uncoated
-
Iscar 0.9134 Dia. Carbide TiAlN Exchangeable Drill Head Coolant Thru
.913″ Exchangeable 3 Flute Drilling Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)
-
-
Iscar 0.4134 Dia. Carbide TiAlN Double Margin Drill Heads Coolant Thru
.413″ Double Margin Drilling Heads for DCN Drills for Machining Steel with High Surface Finish Results
-
HAM 14 mm Dia. 140 TA-CN Coolant Thru Drill
14.10 mm 5XD Solid Carbide Niro Drill, 2 Flutes, TA-CN Coated, Coolant Thru
-
-
-
Advent Tool 12 Pitch AlTiN 7/45 Buttress Thread Mill Insert
External Thread, Neutral Face, 1.5″ LOC , 0.31″ Height, 0.13″Thick EDP# 51541, P/N ATM-12B-7/45V, 12-7/45 Buttress, AlTiN Coating
-
-
HAM 12.8 mm Dia. 137 TA-C Coolant Thru Drill
12.80 mm 15XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
HAM 3.7 mm Dia. 140 TA-C Non-Coolant Thru Drill
3.70 mm 5XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Non-Coolant
-
-
-
Mikron 3.95 mm Dia. TiAlN + TiN Carbide 3XD Pilot Coolant Thru Drill
3.95MM PILOT DRILL 3XD TIALN+TIN
-
Iscar 0.0790 in or 2.0066 mm Countersink Carbide Tialn 2 Flute End Mill
Size: 0.079″ x 0.591″ x 0.598″ x 1.203″