job shop
Showing 3101–3150 of 43236 results
-
-
-
-
-
Tungaloy 25 mm Dia. 5XD Indexable Insert Drill
25mm TungDrillTwisted Indexable insert drills, L/D=5, Flat cotter
-
YG-1 108 mm Dia. 144 HSS Hardslick Throw Away Drill Insert
108.00MM SUPER HSS(T15) SV-POINT THROW-AWAY DRILL Insert HARDSLICK COATED
-
-
YG-1 0.4213 Dia. 130 Cobalt TiN Jobber Non-Coolant Thru Drill
10.7 HSS(M35) JOBBER, WORM PATTERN TYPE STRAIGHT SHANK GOLD-P DRILL FOR DEEP HOLES
-
-
YG-1 0.4531 Dia. 140 Carbide TiAlN 3XD Coolant Thru Drill
29/64 CARBIDE DREAM DRILL INOX W/ COOLANT (3XD)
-
-
STI 7.44 mm Dia. 130 TiAlN Carbide 5-8XD Non-Coolant Thru Drill
7.44 MM DIA 3 FLUTE NON COOLANT TIALN
-
-
-
-
HAM 12.4 mm Dia. 137 TA-C Coolant Thru Drill
12.40 mm 20XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
-
Iscar 0.7716 Dia. Carbide TiAlN Exchangeable Drill Head Coolant Thru
0.772 Exchangeable General Use Drilling Heads
-
Tungaloy 1.0156 Dia. TiAlN DMP Drill Head
1.0157″ DrillMeister DMP Drill heads for indexable head drills. General purpose type.
-
HAM 3.18 mm Dia. 137 TA-C Coolant Thru Drill
1/8″ 30XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
YG-1 0.0890 Dia. 135 Cobalt Split Point Aircraft Non-Coolant Thru Drill
#43 HSSCo5 6″ AIRCRAFT EXTENSION DRILL 135 DEGREE SPLIT POINT COLORING
-
Iscar 6.859 Dia. Tube Coolant Thru Drill
6.85″ Deep Single Tube Drills with Internal Single Start Thread and Cartridges (1.142-9.685 dia.)
-
-
HAM 3.5 mm Dia. kevlar Bright Non-Coolant Thru Drill
3.50 mm Solid Carbide Twist Drill, 2 Flutes, Special Point Grind, Bright, Non-Coolant
-
-
Tungaloy 2.0000 Dia. 4XD Indexable Insert Drill
2″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 4, Flat cotter
-
-
HAM 17.46 mm Dia. 140 TA-C Coolant Thru Drill
11/16″ 12XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
Iscar 0.4961 Dia. Drill Tube System Coolant Thru
.496 – .535″ Drill Tubes – STS System – Inner 4 Start Thread Connection
-
-
-
-
-
-
Advent Tool 3.00 mm Pitch AlTiN ISO Thread Mill Insert
External Thread, 5? Positive Rake, 1.5″ LOC , 0.375″ Height, 0.13″Thick EDP# 50790, P/N ATM-410A3.0MMPV, 3.0-ISO, AlTiN Coating
-
-
-
-
HAM 15.5 mm Dia. 140 TA-CN Non-Coolant Thru Drill
15.50 mm 3XD Solid Carbide Niro Drill, 2 Flutes, TA-CN Coated, Non-Coolant
-
YG-1 1.7500 Dia. 132 HSS Hardslick Throw Away Drill Insert
1-3/4 SUPER HSS(T15) SV-POINT THROW-AWAY DRILL Insert HARDSLICK COATED
-
Iscar 0.4528 Dia. Carbide TiAlN Exchangeable Drill Head Coolant Thru
0.453 Exchangeable General Use Drilling Heads
-
-
-
STI 5.94 mm Dia. 130 Bright Carbide 5-8XD Non-Coolant Thru Drill
5.94 MM DIA 3 FLUTE NON COOLANT BRIGHT
-
-
HAM 5.3 mm Dia. 130 Bright Non-Coolant Thru Drill
5.30 mm Solid Carbide Twist Drill, 2 Flutes, AMS Geometry, Bright, Non-Coolant
-
HAM 4.3 mm Dia. 135 TA Coolant Thru Drill
4.50 mm 12XD Solid Carbide Multi Drill, 2 Straight Flutes, TA Coated, Coolant Thru
-
