job shop
Showing 701–750 of 43236 results
-
-
Tungaloy 0.8125 Dia. 5XD Indexable Insert Drill
0.812″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 5, Flat cotter
-
-
YG-1 0.5156 Dia. 132 Cobalt TiAlN Throw Away Drill Insert
33/64 PREMIUM COBALT(M48) THROW-AWAY DRILL InsertS TIALN COATED
-
HAM 5 mm Dia. 140 TA-C Coolant Thru Drill
5.00 mm 12XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
Tungaloy 1.1875 Dia. 2XD Indexable Insert Drill
1.187″ TungSix-Drill Indexable insert drills, L/D=2, Whistle notch
-
-
HAM 13.8 mm Dia. 137 TA-C Coolant Thru Drill
13.80 mm 30XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
HAM 7.2 mm Dia. 137 TA-C Coolant Thru Drill
7.20 mm 15XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
-
-
Advent Tool 6 Pitch Bright Full Acme Thread Mill Insert
External Thread, 5? Positive Rake, 1.5″ LOC , 0.375″ Height, 0.13″Thick EDP# 50883, P/N ATM-410A6FAP, 6-Full Acme, Uncoated
-
HAM 9.13 mm Dia. 137 TA-C Coolant Thru Drill
9.20 mm 20XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
Mikron 3.35 mm Dia. TiAlN + TiN Carbide 3XD Pilot Coolant Thru Drill
3.4MM PILOT DRILL 3XD TIALN+TIN
-
-
-
-
-
-
YG-1 12.4 mm Dia. 140 Carbide TiAlN 10XD Coolant Thru Drill
12.40MM CARBIDE DRILL MQL TYPE W/ COOLANT (10XD)
-
YG-1 4.22 mm Dia. 118 Carbide Bright Jobber Non-Coolant Thru Drill
4.22MM CARBIDE JOBBER LENGTH TWIST DRILL TIALN COATED
-
-
-
YG-1 0.5781 Dia. 132 Cobalt Hardslick Throw Away Drill Insert
37/64 PREMIUM COBATL(M48) THROW-AWAY DRILL InsertS HARDSLICK COATED
-
-
-
Tungaloy 13 mm Dia. 1.5XD Indexable Drill w/ Flanged Shank
13mm DrillMeister Indexable head drill with flanged shank
-
-
YG-1 15.7 mm Dia. 132 Carbide TiAlN Throw Away Drill Insert
15.70MM CARBIDE (C3) THROW-AWAY DRILL Insert TIALN-COATED
-
Tungaloy 41 mm Dia. 3XD Indexable Insert Drill
41mm TungDrillTwisted Indexable insert drills, L/D=3, Flat cotter
-
HAM 7.4 mm Dia. 137 TA-C Coolant Thru Drill
7.40 mm 40XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
YG-1 19 mm Dia. 180 Flat Bottom Carbide TiAlN 2XD Non-Coolant Thru Drill
19.00MM DREAM DRILL FLAT BOTTOM DRILL W/O COOLANT HOLE (2XD)
-
YG-1 47 mm Dia. 132 Carbide TiN Throw Away Drill Insert
47.00MM CARBIDE (C5) THROW-AWAY DRILL Insert TIN-COATED
-
YG-1 5.2 mm Dia. 140 Carbide TiAlN 5XD Coolant Thru Drill
5.20MM CARBIDE DREAM DRILL W/ COOLANT (5XD) – METRIC
-
Advent Tool 16 Pitch Bright UN Thread Mill Insert
External Thread, 5? Positive Rake, 1.5″ LOC , 0.31″ Height, 0.13″Thick EDP# 50467, P/N ATM-410A16P, 16-UN, Uncoated
-
YG-1 5.2 mm Dia. 140 Carbide TiAlN 3XD Non-Coolant Thru Drill
5.20MM CARBIDE DREAM DRILL (3XD) – METRIC
-
-
-
YG-1 6.9 mm Dia. 140 Carbide TiAlN 30XD Coolant Thru Drill
6.90MM CARBIDE DREAM DRILLS MQL TYPE W/ COOLANT HOLES (30XD)
-
YG-1 0.1875 Dia. 60 HSS Bright Center Non-Coolant Thru Drill
3/16 HSS(M2) 60 DEGREE POINT LONG LENGTH CENTER DRILL
-
-
-
-
HAM 6.9 mm Dia. 140 TA-C Coolant Thru Drill
6.90 mm 8XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
HAM 2.3 mm Dia. 135 TA-C Coolant Thru Drill
2.30 mm 20XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
Iscar 0.9291 Dia. Carbide TiAlN Double Margin Drill Heads Coolant Thru
.929″ Double Margin Drilling Heads for DCN Drills for Machining Cast Iron with High Surface Finish Results
-
