job shop
Showing 5551–5600 of 43236 results
-
HAM 9.6 mm Dia. 137 TA-C Coolant Thru Drill
9.60 mm 25XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
Tungaloy 1.9375 Dia. 5XD Indexable Insert Drill
1.937″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 5, Flat cotter
-
-
-
-
-
Iscar 1.3386 Dia. Tube Counterbore Coolant Thru
1.339″ Deep Single Tube Counterbore with a Through Hole, Internal Single Start Thread Adjustable Diameter (.984-1.574 dia.)
-
Iscar 0.7756 Dia. Carbide TiAlN Exchangeable Drill Head Coolant Thru
.776″ Exchangeable Drilling Heads for Cast Iron
-
-
-
-
-
-
HAM 8.4 mm Dia. 120 TA Non-Coolant Thru Drill
8.40 mm Solid Carbide Twist Drill, 2 Flute, TA Coated, Non-Coolant
-
-
-
Tungaloy 7.5 mm Dia. 3XD Indexable Drill w/ Flanged Shank
7.5mm DrillMeister Indexable head drill with flanged shank
-
-
HAM 2 mm Dia. 135 TA-C Coolant Thru Drill
2.00 mm 25XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
YG-1 1.4062 Dia. Series 3 Straight Shank & Flute Spade Holder
SERIES 3 STRAIGHT SHANK & STRAIGHT FLUTE LONG LENGTH SPADE DRILL HOLDER
-
Iscar 0.8661 Dia. Carbide TiAlN Exchangeable Flat Bottom Drill Head Coolant Thru
.866″ Exchangeable Flat Bottom DCN Drill Heads for Steel and Cast Iron (ISO P and ISO K Materials)
-
-
YG-1 0.8750 Dia. 132 Carbide Hardslick Throw Away Drill Insert
7/8 CARBIDE (C5) SV-POINT THROW-AWAY DRILL Insert HARDSLICK COATED
-
YG-1 0.3970 Dia. 135 HSS Split Point Aircraft Non-Coolant Thru Drill
X HSS 6″ AIRCRAFT EXTENSION DRILL 135 DEGREE SPLIT POINT STEAM HOMO
-
YG-1 6.5 mm Dia. 118 Carbide DLC 5XD Coolant Thru Drill
6.50MM CARBIDE DREAM DRILL FOR ALUMINUM W/ COOLANT (5XD) – METRIC
-
HAM 7.8 mm Dia. 120 Bright Non-Coolant Thru Drill
7.80 mm Solid Carbide Twist Drill, 2 Flute, Bright, Non-Coolant
-
-
YG-1 0.4219 Dia. 132 HSS TiAlN Throw Away Drill Insert
27/64 SUPER HSS(T15) SM POINT THROW-AWAY DRILL Insert TIALN COATED
-
HAM 18 mm Dia. 140 TA-C Coolant Thru Drill
18.00 mm 12XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
YG-1 1.1024 – 1.1217 Dia. 5XD Flanged Shank Drill Holder (I-Dream)
1.1024 MIN DIA 1.1217 MAX DIA I-DREAM DRILL HOLDER, FLANGED SHANK (5XD)
-
-
YG-1 11 mm Dia. 132 Carbide TiN Throw Away Drill Insert
11.00MM CARBIDE (C5) THROW-AWAY DRILL Insert TIN-COATED
-
-
Iscar 2.3858 Dia. Tube Coolant Thru Drill
2.386″ Deep Single Tube Counterbore with Through Hole, External 4 Start Thread and a Brazed Tip (.744-2.559 dia.)
-
-
Tungaloy 1.5000 Dia. TiAlN SMP Drill Head
1-1/2″ DrillForceMeister SMP Drill heads for indexable head drill
-
-
Iscar 0.6102 Dia. Carbide TiAlN+TiN Exchangeable Drill Heads Coolant Thru
.610″ Exchangeable DCN Drill Heads, for Cast Iron (ISO K Materials)
-
-
HAM 8 mm Dia. 135 Bright Coolant Thru Drill
8.00 mm 12XD Solid Carbide Multi Drill, 2 Straight Flutes, Bright, Coolant Thru
-
-
YG-1 0.6562 Dia. 132 Carbide TiAlN Throw Away Drill Insert
21/32 CARBIDE (C5) THROW-AWAY DRILL Insert TIALN-COATED
-
HAM 0.9 mm Dia. 135 TA Coolant Thru Drill
0.90 mm 20XD Solid Carbide Deep Hole Drill, 2 Flutes, TA Coated, Coolant Thru
-
-
-
YG-1 0.4687 Dia. 140 Carbide TiAlN 5XD Coolant Thru Drill
15/32 CARBIDE DREAM DRILL W/ COOLANT HOLES(5XD)
-
-
Advent Tool 11.5 Pitch TiAlN NPS Thread Mill Insert
External Thread, Neutral Face, 1.5″ LOC , 0.25″ Height, 0.093″Thick EDP# 51278, P/N ATM-38B115NPSZ, 11.5-NPS, TiAlN Coating
-
