holemaking
Showing 45051–45100 of 46144 results
-
YG-1 0.7676 – 0.7870 Dia. 7XD Flanged Shank Drill Holder (I-Dream)
.7677 MIN DIA 0.787 MAX DIA I-DREAM DRILL HOLDER, FLANGED SHANK (7XD)
-
YG-1 41 mm Dia. 132 HSS Hardslick Throw Away Drill Insert
41.00MM SUPER HSS(T15) SV-POINT THROW-AWAY DRILL Insert H-COATED
-
Tungaloy 2.1250 Dia. 4XD Indexable Insert Drill
2-1/8″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 4, Flat cotter
-
YG-1 5.79 mm Dia. 140 Carbide TiAlN+TiN 3XD Coolant Thru Drill
5.79MM CARBIDE DREAM DRILL HIGH FEED 3XD W/ COOLANT HOLE SLOT (H-COATING)
-
YG-1 0.3425 Dia. 135 Cobalt TiN Straight Shank Jobber Non-Coolant Thru Drill
8.7 HSS-Co5% JOBBERS LENGTH STRAIGHT SHANK GOLD-P DRILLS
-
-
-
YG-1 0.1770 Dia. 135 HSS Bright Screw Machine Non-Coolant Thru Drill
#16 HSS(M2) SCREW MACHINE DRILL
-
-
-
YG-1 0.5469 Dia. 132 Carbide Hardslick Throw Away Drill Insert
35/64 CARBIDE (C5) SV-POINT THROW-AWAY DRILL Insert H-COATED
-
-
-
-
-
-
-
-
Iscar 0.7913 Dia. Carbide TiAlN Exchangeable Self-Centering Drill Head Coolant Thru
.791″ Exchangeable DCN Drill Self-Centering Heads for Alloy Steel and Cast Iron
-
-
-
Iscar 0.748 Dia. Carbide TiAlN Exchangeable Drill Heads Coolant Thru
.748″ Exchangeable DCN Drill Heads, for Cast Iron (ISO K Materials)
-
YG-1 0.2656 Dia. 135 Cobalt TiN Parabolic Screw Machine Non-Coolant Thru Drill
17/64 HSS(M35) SCREW MACHINE PARABOLIC TIN COATED DRILL
-
-
Iscar 0.611 Dia. Tube Counterbore Coolant Thru
0.611″ Deep Single Tube Counterbore Without a Through Hole, Internal Single Start Thread and a Brazed Tip (.571-2.559 dia.)
-
-
Ingersoll 2 Dia. Bright 4XD Flat Bottom Square Insert Indexable Coolant Thru Drill
2.000 (50.80 mm) Square Insert Indexable Drills Inch|L:D Ratio – 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
-
YG-1 0.0781 Dia. 135 Cobalt Split Point Aircraft Non-Coolant Thru Drill
5/64 HSSCo5 6″ AIRCRAFT EXTENSION DRILL 135 DEGREE SPLIT POINT COLORING
-
Ingersoll 0.4528 Dia. 140 12XD Replaceable Tipped Drill Body Coolant Thru
0.4527 (11.499 mm)-0.4685 (11.900 mm) GoldTwist Body
-
-
YG-1 0.7187 Dia. 132 HSS TiAlN Throw Away Drill Insert
23/32 SUPER HSS(T15) SM POINT THROW-AWAY DRILL Insert TIALN COATED
-
YG-1 40 mm Dia. 132 Carbide Hardslick Throw Away Drill Insert
40.00MM CARBIDE (C5) SV-POINT THROW-AWAY DRILL Insert H-COATED
-
YG-1 0.2992 Dia. 130 TiN Stub Non-Coolant Thru Drill
7.6MM HSS-EX HPD-SUS TWIST DRILL TiN-COATED (STUB)
-
-
HAM 5.8 mm Dia. 137 TA-C Coolant Thru Drill
5.80 mm 30XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
-
-
-
-
YG-1 11.7 mm Dia. 140 Carbide TiAlN 20XD Coolant Thru Drill
11.70MM CARBIDE DRILL MQL TYPE W/ COOLANT (20XD)
-
-
-
Iscar 1.6929 Dia. Drill Tube System Coolant Thru
1.693 – 1.850″ Drill Tubes – STS System – Inner 4 Start Thread Connection
-
YG-1 78 mm Dia. 144 HSS Hardslick Throw Away Drill Insert
78.00MM SUPER HSS(T15) SV-POINT THROW-AWAY DRILL Insert HARDSLICK COATED
-
-
Iscar 0.1969 in or 5.0000 mm Cham Mill Carbide Tialn 6 Flute End Mill
Size: 0.197″ x 0.726″ x 0.169″ x 1.547″
-
