holemaking
Showing 44551–44600 of 46144 results
-
HAM 2.3 mm Dia. 135 TA-C Coolant Thru Drill
2.30 mm 20XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
YG-1 19 mm Dia. 140 Carbide TiAlN 5XD Coolant Thru Drill
19.00MM CARBIDE DREAM DRILL W/ COOLANT (5XD) – METRIC
-
HAM 5.6 mm Dia. 120 TA Non-Coolant Thru Drill
5.60 mm Solid Carbide Twist Drill, 2 Flute, TA Coated, Non-Coolant
-
Tungaloy 1.0827 Dia. TiAlN SMP Drill Head
1.0826″ DrillForceMeister SMP Drill heads for indexable head drill
-
Ingersoll 2 Dia. Bright 2XD Flat Bottom Square Insert Indexable Coolant Thru Drill
2.000 (50.80 mm) Square Insert Indexable Drills – Inch|L:D Ratio – 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
-
STI 6.7 mm Dia. 130 Bright Carbide 5-8XD Non-Coolant Thru Drill
6.70 MM DIA 3 FLUTE NON COOLANT BRIGHT
-
-
HAM 10.72 mm Dia. 137 TA-C Coolant Thru Drill
27/64″ 25XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
Ingersoll 1.4375 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.437 (36.50 mm) Square Insert Indexable Drills Inch|L:D Ratio – 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
YG-1 0.2969 Dia. 135 HSS TiN Straight Shank Jobber Non-Coolant Thru Drill
19/64 HSS(M2) JOBBERS LENGTH STRAIGHT SHANK GOLD-P DRILLS
-
HAM 2.5 mm Dia. 135 TA Coolant Thru Drill
2.50 mm 8XD Solid Carbide Deep Hole Drill, 2 Flutes, TA Coated, Coolant Thru
-
-
-
Iscar 0.6929 Dia. Carbide TiAlN Exchangeable Drill Heads Coolant Thru
.693″ Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)
-
-
HAM 15.48 mm Dia. 140 TA-CN Coolant Thru Drill
39/64 mm 8XD Solid Carbide Niro Drill, 2 Flutes, TA-CN Coated, Coolant Thru
-
-
-
-
-
-
Ingersoll 1.4688 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.468 (37.29 mm) Square Insert Indexable Drills Inch|L:D Ratio – 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
HAM 1.7 mm Dia. 135 TA Coolant Thru Drill
1.70 mm 12XD Solid Carbide Deep Hole Drill, 2 Flutes, TA Coated, Coolant Thru
-
YG-1 47 mm Dia. 132 Carbide TiN Throw Away Drill Insert
47.00MM CARBIDE (C2) THROW-AWAY DRILL Insert TiN-COATED
-
-
Iscar 3.189 Dia. Drill Tube System Coolant Thru
3.189 – 3.582″ Drill Tubes – STS System – Outer Single Start Thread Connection
-
HAM 6.8 mm Dia. 140 TA-CN Coolant Thru Drill
6.80 mm 5XD Solid Carbide Niro Drill, 2 Flutes, TA-CN Coated, Coolant Thru
-
-
STI 10.5 mm Dia. 130 Bright Carbide 5-8XD Non-Coolant Thru Drill
10.50 MM DIA 3 FLUTE NON COOLANT BRIGHT
-
Iscar 0.7187 Dia. Gundrill Coolant Thru
0.718″ Gundrills Carrying Triangular Inserts Featuring 3 Chip Splitting Cutting Edges and a Wiper for High Hole Surface Quality
-
-
-
-
Iscar 0.7125 Dia. Carbide TiAlN Exchangeable Flat Bottom Drill Head Coolant Thru
.713″ Exchangeable Flat Bottom DCN Drill Heads for Steel and Cast Iron (ISO P and ISO K Materials)
-
-
Iscar 0.9843 Dia. Carbide TiAlN Exchangeable Chip Splitting Drill Head Coolant Thru
.984″ Exchangeable Chip Splitting Drill Heads for Stainless and Alloyed Steel
-
-
-
-
-
-
YG-1 0.1660 Dia. 135 HSS Bright Screw Machine Non-Coolant Thru Drill
#19 HSS(M2) SCREW MACHINE DRILL
-
HAM 11.9 mm Dia. 140 TA-CN Coolant Thru Drill
11.90 mm 5XD Solid Carbide Niro Drill, 2 Flutes, TA-CN Coated, Coolant Thru
-
Tungaloy 47 mm Dia. 2XD Indexable Insert Drill
47mm TungSix-Drill Indexable insert drills, L/D=2, Flat cotter
-
YG-1 23 mm Dia. 132 Cobalt Hardslick Throw Away Drill Insert
23.00MM PREMIUM COBALT(M48) SV-POINT THROW-AWAY DRILL Insert HARDSLICK COATED
-
YG-1 0.413 Dia. 135 HSS Split Point Aircraft Non-Coolant Thru Drill
Z HSS 12″ AIRCRAFT EXTENSION DRILL 135 DEGREE SPLIT POINT STEAM HOMO
-
Iscar 0.5394 Dia. Carbide TiAlN Exchangeable Drill Head Coolant Thru
0.539 Exchangeable General Use Drilling Heads
-
Mikron 3.35 mm Dia. TiAlN + TiN Carbide 3XD Pilot Coolant Thru Drill
3.35MM PILOT DRILL 3XD TIALN+TIN