holemaking
Showing 44251–44300 of 46144 results
-
Tungaloy 18 mm Dia. 5XD Indexable Insert Drill
18mm TungDrillTwisted Indexable insert drills, L/D=5, Flat cotter
-
-
-
-
YG-1 18 mm Dia. 132 HSS Hardslick Throw Away Drill Insert
18.00MM SUPER HSS(T15) SV-POINT THROW-AWAY DRILL Insert HARDSLICK COATED
-
YG-1 0.0935 Dia. 135 Cobalt TiN Straight Shank Jobber Non-Coolant Thru Drill
#42 HSS(M42) JOBBERS LENGTH STRAIGHT SHANK GOLD-P DRILLS
-
HAM 19 mm Dia. 140 TA-C Coolant Thru Drill
19.00 mm 3XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
-
-
Ingersoll 0.8189 Dia. 140 TIALN 3XD, 5XD, 8XD Replaceable Drill Tip Coolant Thru
0.8189 (20.80 mm) QwikTwist Tip Carbide
-
Ingersoll 0.748 Dia. 140 3.5XD Replaceable Tipped Drill Body Coolant Thru
.7480-.7835 QwikTwist Body
-
Tungaloy 52 mm Dia. 3XD Indexable Insert Drill
52mm TungSix-Drill Indexable insert drills, L/D=3, Flat cotter
-
-
Tungaloy 38 mm Dia. 2XD Indexable Insert Drill
38mm TungSix-Drill Indexable insert drills, L/D=2, Flat cotter
-
-
-
-
HAM 2.55 mm Dia. 140 TA-CN Non-Coolant Thru Drill
2.55 mm 3XD Solid Carbide Niro Drill, 2 Flutes, TA-CN Coated, Non-Coolant
-
HAM 14.8 mm Dia. 140 TA-C Non-Coolant Thru Drill
14.80 mm 3XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Non-Coolant
-
Iscar 2.874 Dia. Drill Tube System Coolant Thru
2.874 – 3.149″ Drill Tubes – STS System – Inner 4 Start Thread Connection
-
Iscar 0.3701 Dia. Carbide TiAlN Double Margin Drill Heads Coolant Thru
.370″ Double Margin Drilling Heads for DCN Drills for Machining Cast Iron with High Surface Finish Results
-
-
Ingersoll 0.748 Dia. 140 3XD Replaceable Tipped Drill Body Coolant Thru
0.7480 (19.000 mm)-0.7835 (19.900 mm) GoldTwist Body
-
-
-
YG-1 12.5 mm Dia. 140 Carbide TiAlN 3XD, 5XD, 7XD Drill Insert Coolant Thru
12.50MM I-DREAMDRILL Insert TIALN-COATED #A
-
YG-1 14.5 mm Dia. 132 Carbide Hardslick Throw Away Drill Insert
14.50MM CARBIDE (C5) SV-POINT THROW-AWAY DRILL Insert HARDSLICK COATED
-
Iscar 0.6102 Dia. Carbide TiAlN 3XD, 5XD, 8XD Drill Head Coolant Thru
.610″ DCM Drill Heads for Cast Iron
-
-
-
-
-
Tungaloy 1.4375 Dia. TiAlN SMP Drill Head
1.437″ DrillForceMeister SMP Drill heads for indexable head drill
-
HAM 7.54 mm Dia. 140 TA-C Coolant Thru Drill
19/64″ 5XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
HAM 8.1 mm Dia. 137 TA-C Coolant Thru Drill
8.10 mm 30XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
Ingersoll 0.7087 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.709 (18.00 mm) Square Insert Indexable Drills Metric|L:D Ratio – 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|
-
-
Ingersoll 0.6875 Dia. Bright 5XD Square Insert Indexable Coolant Thru Drill
0.688 (17.48 mm) Square Insert Indexable Drills|L:D Ratio – 5:1|
-
YG-1 0.6250 Dia. 118 HSS Black-Gold Silver/ Deming Non-Coolant Thru Drill
5/8 HSS(M2) 118 DEGREE SPLIT POINT 3 FLAT GOLD & BLACK S & D DRILL
-
YG-1 0.9688 Dia. Series 2 Taper Shank-Straight Flute Spade Holder
SERIES 2 TAPER SHANK & STRAIGHT FLT SHORT LENGTH SPADE DRILL HOLDER
-
-
Ingersoll 0.591 Dia. Bright 2XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.591 (15.01 mm) Square Insert Indexable Drills – Inch|L:D Ratio – 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
YG-1 43 mm Dia. 132 Carbide TiAlN Throw Away Drill Insert
43.00MM CARBIDE (C2) THROW-AWAY DRILL Insert TIALN-COATED
-
-
-
YG-1 0.3860 Dia. 135 Cobalt TiN Parabolic Screw Machine Non-Coolant Thru Drill
W HSS(M35) SCREW MACHINE PARABOLIC TIN COATED DRILL
-
HAM 3.5 mm Dia. 140 TA-C Coolant Thru Drill
3.50 mm 12XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
Tungaloy 3.8 mm Dia. TiAlN 2XD Non-Coolant Thru Drill
3.8 mm GigaPowerDrill series without coolant hole, L/D=2, dia=3.0 – 16.0mm