holemaking
Showing 41701–41750 of 46144 results
-
-
-
-
-
-
-
Iscar 0.4252 Dia. Carbide TiAlN Exchangeable Drill Head Coolant Thru
0.425 Exchangeable General Use Drilling Heads
-
Iscar 0.2992 Dia. Carbide TiAlN Double Margin Drill Heads Coolant Thru
.299″ Double Margin Drilling Heads for DCN Drills for Machining Cast Iron with High Surface Finish Results
-
Ingersoll 0.8268 Dia. 140 TIALN 3XD, 5XD, 8XD Replaceable Drill Tip Coolant Thru
0.8268 (21.00 mm) QwikTwist Tip Carbide
-
-
Ingersoll 1.2992 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.299 (33.00 mm) Square Insert Indexable Drills Metric|L:D Ratio – 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|
-
Iscar 0.0790 in or 2.0066 mm Countersink Carbide Tialn 2 Flute End Mill
Size: 0.079″ x 0.591″ x 0.598″ x 1.203″
-
HAM 1.6 mm Dia. 120 Bright Non-Coolant Thru Drill
1.60 mm Solid Carbide Twist Drill, 2 Flute, Bright, Non-Coolant
-
-
-
HAM 1.7 mm Dia. 135 TA Coolant Thru Drill
1.70 mm 20XD Solid Carbide Deep Hole Drill, 2 Flutes, TA Coated, Coolant Thru
-
YG-1 0.0810 Dia. 135 HSS TiN Straight Shank Jobber Non-Coolant Thru Drill
#46 HSS(M2) JOBBERS LENGTH STRAIGHT SHANK GOLD-P DRILLS
-
HAM 9.6 mm Dia. 137 TA-C Coolant Thru Drill
9.60 mm 15XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
YG-1 53.01 mm Dia. 132 HSS Hardslick Throw Away Drill Insert
53.00MM SUPER HSS(T15) SV-POINT THROW-AWAY DRILL Insert HARDSLICK COATED
-
-
-
-
-
-
YG-1 6.6 mm Dia. 180 Flat Bottom Carbide TiAlN 2XD Non-Coolant Thru Drill
6.60MM DREAM DRILL FLAT BOTTOM DRILL W/O COOLANT HOLE (2XD)
-
-
HAM 2.15 mm Dia. 140 TA Non-Coolant Thru Drill
2.15 mm Solid Carbide Twist Drill, 2 Flutes, TA Coated, Non-Coolant
-
Iscar 0.4567 Dia. Carbide TiAlN 3XD, 5XD, 8XD Drill Head Coolant Thru
.457″ General Use DCM Drill Heads
-
Iscar 1.8504 Dia. Tube Counterbore Coolant Thru
1.85″ Deep Single Tube Counterbore with a Through Hole, Internal Single Start Thread and a Cartridge (1.575-4.370 dia.)
-
-
YG-1 19 mm Dia. 140 Carbide TiAlN+TiN 3XD Coolant Thru Drill
19.00MM CARBIDE DREAM DRILL HIGH FEED 3XD W/ COOLANT HOLE SLOT DIN 6537 (H-COATING)
-
Iscar 0.6024 Dia. Carbide TiAlN 3XD, 5XD, 8XD Drill Head Coolant Thru
.602″ DCM Drill Heads for Cast Iron
-
-
-
-
YG-1 9.1 mm Dia. 180 Flat Bottom Carbide TiAlN 2XD Non-Coolant Thru Drill
9.10MM DREAM DRILL FLAT BOTTOM DRILL W/O COOLANT HOLE (2XD)
-
YG-1 5.2 mm Dia. 140 Carbide TiAlN+TiN 3XD Coolant Thru Drill
5.20MM CARBIDE DREAM DRILL HIGH FEED 3XD W/ COOLANT HOLE SLOT DIN 6537 (H-COATING)
-
HAM 14.29 mm Dia. 135 Bright Coolant Thru Drill
9/16″ 12XD Solid Carbide Multi Drill, 2 Straight Flutes, Bright, Coolant Thru
-
YG-1 39 mm Dia. 132 HSS TiAlN Throw Away Drill Insert
39.00MM SUPER HSS(T15) SM POINT THROW-AWAY DRILL Insert TIALN COATED
-
Ingersoll 1.9375 Dia. Bright BTA Brazed Head DTS Coolant Thru
1.937 BTA Brazed Head|Double tube system|External 4-start thread|.725-2.559″ (18.4-65.0 mm)|
-
Tungaloy 4 mm Dia. TiAlN 5XD Coolant Thru Drill
4 mm GigaJetDrill series with coolant hole, L/D=5, dia=3.0 – 20.0mm
-
YG-1 0.7283 Dia. 130 TiN Jobber Non-Coolant Thru Drill
18.5MM HSS-EX HPD-SUS TWIST DRILL TiN-COATED (JOBBERS)
-
-
-
-
YG-1 0.4531 Dia. 132 Carbide TiN Throw Away Drill Insert
29/64 CARBIDE (C5) THROW-AWAY DRILL Insert TIN-COATED
-
Iscar 0.3307 Dia. Carbide TiAlN Double Margin Drill Heads Coolant Thru
.331″ Double Margin Drilling Heads for DCN Drills for Machining Steel with High Surface Finish Results
-
HAM 6.2 mm Dia. 140 TA-C Coolant Thru Drill
6.20 mm 12XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
