holemaking
Showing 40101–40150 of 46144 results
-
Iscar 0.7519 Dia. Carbide TiAlN Exchangeable Drill Head Coolant Thru
.752″ Exchangeable 3 Flute Drilling Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)
-
YG-1 0.1250 Dia. 140 Carbide TiAlN 2XD Non-Coolant Thru Drill
1/8 DREAM DRILL FLAT BOTTOM DRILL W/O COOLANT HOLE (2XD)
-
-
Ingersoll 1.4375 Dia. Bright 4XD Square Insert Indexable Coolant Thru Drill
1.437 (36.50 mm) Square Insert Indexable Drills|L:D Ratio – 4:1|
-
-
HAM 6.8 mm Dia. 120 Bright Non-Coolant Thru Drill
6.80 mm Solid Carbide Twist Drill, 2 Flute, Bright, Non-Coolant
-
YG-1 1.4375 Dia. 132 HSS TiAlN Throw Away Drill Insert
1-7/16 SUPER HSS(T15) THROW-AWAY DRILL Insert TIALN COATED
-
YG-1 1.5937 Dia. 132 Carbide TiAlN Throw Away Drill Insert
1-19/32 CARBIDE (C2) THROW-AWAY DRILL Insert TIALN-COATED
-
Iscar 0.7519 Dia. Carbide TiAlN Double Margin Drill Heads Coolant Thru
.752″ Double Margin Drilling Heads for DCN Drills for Machining Steel with High Surface Finish Results
-
-
YG-1 19.6 mm Dia. 140 Carbide TiAlN 3XD Non-Coolant Thru Drill
19.60MM CARBIDE DREAM DRILL W/O COOLANT HOLES (3XD)
-
YG-1 0.8125 Dia. 132 HSS Hardslick Throw Away Drill Insert
13/16 SUPER HSS(T15) SV-POINT THROW-AWAY DRILL Insert HARDSLICK COATED
-
-
-
-
-
-
-
-
-
-
HAM 0.9 mm Dia. 135 TA Coolant Thru Drill
0.90 mm 12XD Solid Carbide Deep Hole Drill, 2 Flutes, TA Coated, Coolant Thru
-
HAM 4.5 mm Dia. 140 TA-C Non-Coolant Thru Drill
4.50 mm 3XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Non-Coolant
-
Tungaloy 34 mm Dia. 4XD Indexable Insert Drill
34mm TungSix-Drill Indexable insert drills, L/D=4, Flat cotter
-
Ingersoll 1.875 Dia. Bright 2XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.875 (47.63 mm) Square Insert Indexable Drills – Inch|L:D Ratio – 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
HAM 3.65 mm Dia. 140 TA-C Coolant Thru Drill
3.65 mm 5XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
-
-
Ingersoll 0.7519 Dia. Bright BTA Brazed STS Coolant Thru
0.75 BTA Brazed|Single tube system|External 4-start thread|.496-2.559″ (12.6-65.0 mm)|
-
-
-
YG-1 1.2187 Dia. 118 HSS Black-Gold Silver/ Deming Non-Coolant Thru Drill
1-7/32 HSS(M2) 118 DEGREE SPLIT POINT 3 FLAT GOLD & BLACK S & D DRILL
-
-
-
Iscar 0.8071 Dia. Carbide TiAlN Exchangeable Chip Splitting Drill Head Coolant Thru
.807″ Exchangeable Chip Splitting Drill Heads for Stainless and Alloyed Steel
-
Ingersoll 0.386 Dia. 140 TIALN Replaceable Drill Tip Coolant Thru
0.3858 (9.80 mm) Gold Twist Replaceable Tips|Stainless Steel & Exoti
-
Ingersoll 0.9843 Dia. 140 8XD Replaceable Tipped Drill Body Coolant Thru
0.9843 (25.0 mm)-1.0197 (25.9 mm) GoldTwist Body
-
-
-
-
-
Tungaloy 6 mm Dia. TiAlN 3XD Non-Coolant Thru Drill
6 mm GigaPowerDrill series without coolant hole, L/D=3, dia=3.0 – 16.0mm
-
-
Iscar 0.25 Dia. TiAlN 5XD Non-Coolant Thru Drill
1/4″ DIN 6537 Solid Carbide Drills with Coolant Holes, Drilling Depth 5xD
-
-
-
-
-