holemaking
Showing 38101–38150 of 46144 results
-
HAM 11.8 mm Dia. 137 TA-C Coolant Thru Drill
11.80 mm 15XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
Tungaloy 20 mm Dia. 4XD Indexable Insert Drill
20mm TungSix-Drill Indexable insert drills, L/D=4, Flat cotter
-
HAM 6 mm Dia. 140 TA-C Coolant Thru Drill
6.00 mm 3XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
HAM 12.1 mm Dia. 140 TA-C Coolant Thru Drill
12.10 mm 5XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
-
-
-
YG-1 0.4035 Dia. 135 Cobalt TiN Split Point Screw Machine Non-Coolant Thru Drill
10.25 HSS(M42) STUB LENGTH DIN1897 SPLIT POINT DRILLS TIN COATED
-
YG-1 0.1065 Dia. 135 Cobalt Split Point Aircraft Non-Coolant Thru Drill
#36 HSSCo5 6″ AIRCRAFT EXTENSION DRILL 135 DEGREE SPLIT POINT COLORING
-
-
-
-
-
-
-
STI 11.91 mm Dia. 130 Bright Carbide 5-8XD Non-Coolant Thru Drill
11.91 MM DIA 3 FLUTE NON COOLANT BRIGHT
-
HAM 9.1 mm Dia. 137 TA-C Coolant Thru Drill
9.10 mm 25XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
-
HAM 4.57 mm Dia. 137 TA-C Coolant Thru Drill
4.57 mm 40XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
Tungaloy 10.5 mm Dia. TiAlN 2XD Non-Coolant Thru Drill
10.5 mm GigaPowerDrill series without coolant hole, L/D=2, dia=3.0 – 16.0mm
-
YG-1 30 mm Dia. 132 Carbide Hardslick Throw Away Drill Insert
30.00MM CARBIDE (C5) SV-POINT THROW-AWAY DRILL Insert H-COATED
-
-
-
-
-
-
Iscar 0.7244 Dia. Carbide TiAlN Double Margin Drill Heads Coolant Thru
.724″ Double Margin Drilling Heads for DCN Drills for Machining Cast Iron with High Surface Finish Results
-
-
Iscar 0.6496 Dia. Carbide TiAlN Exchangeable Flat Bottom Drill Head Coolant Thru
.650″ Exchangeable Flat Bottom DCN Drill Heads for Steel and Cast Iron (ISO P and ISO K Materials)
-
-
-
-
YG-1 8.1 mm Dia. 140 Carbide TiAlN 6XD Non-Coolant Thru Drill
8.10MM CARBIDE DREAM DRILL FOR HIGH HARDENED MATERIAL (HRc50 ~ HRc70) TIALN COATED
-
-
-
YG-1 6.5 mm Dia. 140 Carbide TiAlN 10XD Coolant Thru Drill
6.50MM CARBIDE DRILL MQL TYPE W/ COOLANT (10XD)
-
-
-
-
Iscar 0.5512 Dia. Carbide TiAlN Exchangeable Chip Splitting Drill Head Coolant Thru
.551″ Exchangeable Chip Splitting Drill Heads for Stainless and Alloyed Steel
-
Ingersoll 1.5625 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.562 (39.67 mm) Square Insert Indexable Drills Inch|L:D Ratio – 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Iscar 5.8661 Dia. Drill Tube System Coolant Thru
5.866 – 6.378″ Drill Tubes – STS System – Outer Single Start Thread Connection
-
YG-1 30 mm Dia. 132 Carbide TiAlN Throw Away Drill Insert
30.00MM CARBIDE (C3) THROW-AWAY DRILL Insert TIALN-COATED
-
HAM 6 mm Dia. 135 TA Coolant Thru Drill
6.00 mm 5XD Solid Carbide Multi Drill, 2 Straight Flutes, TA Coated, Coolant Thru
-
-
Iscar 0.9409 Dia. Carbide TiAlN 3XD, 5XD, 8XD Drill Head Coolant Thru
.941″ General Use DCM Drill Heads