holemaking
Showing 35451–35500 of 46144 results
-
-
YG-1 0.368 Dia. 140 Carbide TiAlN 3XD Coolant Thru Drill
.3680 CARBIDE DREAM DRILL INOX W/ COOLANT (3XD)
-
YG-1 1.9688 Dia. 132 HSS TiAlN Throw Away Drill Insert
1-31/32 HSS(M4) THROW AWAY DRILL Insert TIALN-COATED
-
YG-1 10.5 mm Dia. 132 Carbide TiN Throw Away Drill Insert
10.50MM CARBIDE (C3) THROW-AWAY DRILL Insert TIN-COATED
-
Iscar 0.5709 Dia. Carbide TiAlN Exchangeable Drill Heads Coolant Thru
.571″ Exchangeable DCN Drill Heads, for Cast Iron (ISO K Materials)
-
Tungaloy 0.5354 Dia. TiAlN DMC Drill Head
0.5354″ DrillMeister DMC Drill heads for indexable head drills for high accuracy drilling
-
Iscar 7.2441 Dia. Tube Coolant Thru Drill
7.244″ Deep Single Tube Drills with External 4 Start Thread and Cartridges (1.142-9.173 dia.)
-
-
-
YG-1 0.9062 Dia. 132 Carbide TiN Throw Away Drill Insert
29/32 CARBIDE (C5) THROW-AWAY DRILL Insert TIN-COATED
-
-
HAM 2 mm Dia. 135 TA Coolant Thru Drill
2.00 mm 8XD Solid Carbide Deep Hole Drill, 2 Flutes, TA Coated, Coolant Thru
-
-
HAM 1.8 mm Dia. 135 TA Coolant Thru Drill
1.80 mm 5XD Solid Carbide Deep Hole Drill, 2 Flutes, TA Coated, Coolant Thru
-
YG-1 0.7969 Dia. 132 HSS Hardslick Throw Away Drill Insert
51/64 SUPER HSS(T15) SV-POINT THROW-AWAY DRILL Insert H-COATED
-
-
YG-1 0.1960 Dia. 118 Carbide Bright Jobber Twist Non-Coolant Thru Drill
#9 CARBIDE JOBBER LENGTH TWIST DRILL
-
-
Iscar 1.6929 Dia. Drill Tube System Coolant Thru
1.693 – 1.850″ Drill Tubes – STS System – Inner 4 Start Thread Connection
-
STI 17.27 mm Dia. 130 TiAlN Carbide 5-8XD Non-Coolant Thru Drill
17.27 MM DIA 3 FLUTE NON COOLANT TIALN
-
-
STI 15.12 mm Dia. 130 TiAlN Carbide 5-8XD Non-Coolant Thru Drill
15.12 MM DIA 3 FLUTE NON COOLANT TIALN
-
Ingersoll 0.875 Dia. 140 TIALN 3XD, 5XD, 8XD Replaceable Spade Tip Coolant Thru
0.8750 (22.23 mm) SpadeTwist Tip
-
-
YG-1 6 mm Dia. 140 Carbide TiAlN 8XD Coolant Thru Drill
6.00MM CARBIDE DREAM DRILL INOX W/ COOLANT (8XD)
-
-
-
-
-
STI 4.91 mm Dia. 130 TiAlN Carbide 5-8XD Non-Coolant Thru Drill
4.91 MM DIA 3 FLUTE NON COOLANT TIALN
-
-
Ingersoll 0.591 Dia. Bright 4XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.591 (15.01 mm) Square Insert Indexable Drills Inch|L:D Ratio – 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
-
-
-
-
-
-
YG-1 15.5 mm Dia. 132 Carbide TiAlN Throw Away Drill Insert
15.50MM CARBIDE (C5) THROW-AWAY DRILL Insert TIALN-COATED
-
YG-1 0.0465 Dia. 135 Cobalt TiN Screw Machine Non-Coolant Thru Drill
.0465 HSS(M42) SCREW MACHINE DRILL TIN COATED
-
-
-
-
-
-
-
-
-
HAM 7.7 mm Dia. 120 TA Non-Coolant Thru Drill
7.70 mm Solid Carbide Twist Drill, 2 Flute, TA Coated, Non-Coolant