holemaking
Showing 251–300 of 46144 results
-
-
YG-1 0.4646 Dia. 135 Cobalt TiN Straight Shank Jobber Non-Coolant Thru Drill
11.8 HSS-Co5% JOBBERS LENGTH STRAIGHT SHANK GOLD-P DRILLS
-
YG-1 1.3750 Dia. 132 HSS TiAlN Throw Away Drill Insert
1-3/8 SUPER HSS(T15) THROW-AWAY DRILL Insert TIALN COATED
-
-
Iscar 0.159 Dia. TiAlN 5XD Non-Coolant Thru Drill
0.159″ DIN 6537 Solid Carbide Drills with Coolant Holes, Drilling Depth 5xD
-
-
Ingersoll 0.5748 Dia. 140 TIALN Replaceable Drill Tip Coolant Thru
0.5748 (14.60 mm) Gold Twist Replaceable Tips|Stainless Steel & Exoti
-
-
-
-
HAM 6.4 mm Dia. 120 TA Non-Coolant Thru Drill
6.40 mm Solid Carbide Twist Drill, 2 Flute, TA Coated, Non-Coolant
-
-
Ingersoll 0.5709 Dia. 140 5XD Replaceable Tipped Drill Body Coolant Thru
0.5709 (14.500 mm)-0.5866 (14.900 mm) GoldTwist Body
-
-
-
HAM 1.1 mm Dia. 135 TA Coolant Thru Drill
1.10 mm 20XD Solid Carbide Deep Hole Drill, 2 Flutes, TA Coated, Coolant Thru
-
-
HAM 0.5 mm Dia. 120 Non-Coolant Thru Drill
0.50 mm x 0.80 mm Solid Carbide Centerdrill, 2 Flutes, Uncoated
-
-
Ingersoll 2.25 Dia. Bright BTA Brazed STS Coolant Thru
2.25 BTA Brazed|Single tube system|External 4-start thread|.496-2.559″ (12.6-65.0 mm)|
-
YG-1 16.5 mm Dia. 140 Carbide TiAlN 3XD Non-Coolant Thru Drill
16.50MM CARBIDE DREAM DRILL W/O COOLANT HOLES (3XD)
-
YG-1 0.5625 Dia. 118 HSS Oxide Morse Taper Shank Non-Coolant Thru Drill
9/16 HSS(M2) MORSE TAPER SHANK TWIST DRILLS
-
-
-
-
Ingersoll 1.5312 Dia. Bright 5XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.531 (38.89 mm) Square Insert Indexable Inch Drills|L:D Ratio – 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
YG-1 1.0630 – 1.0823 Dia. 7XD Flanged Shank Drill Holder (I-Dream)
1.0630 MIN DIA 1.0823 MAX DIA I-DREAM DRILL HOLDER, FLANGED SHANK (7XD)
-
-
YG-1 3.6250 Dia. 144 HSS TiAlN Throw Away Drill Insert
3-5/8 HSS(M4) THROW AWAY DRILL Insert TIALN-COATED
-
HAM 7.9 mm Dia. 137 TA-C Coolant Thru Drill
7.90 mm 20XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
-
-
-
YG-1 8.1 mm Dia. 140 Carbide TiAlN 10XD Coolant Thru Drill
8.10MM CARBIDE DRILL MQL TYPE W/ COOLANT (10XD)
-
-
Tungaloy 8.8 mm Dia. TiAlN 3XD Coolant Thru Drill
8.8 mm GigaJetDrill series with coolant hole, L/D=3, dia=3.0 – 20.0mm
-
-
-
Ingersoll 0.2362 Dia. 140 1.5XD Replaceable Tipped Drill Body Coolant Thru
0.2362 (6.0 mm)-0.2520 (6.4 mm) GoldTwist Body
-
-
HAM 4.9 mm Dia. 140 TA-C Non-Coolant Thru Drill
4.90 mm 5XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Non-Coolant
-
-
-
HAM 1.45 mm Dia. 140 TA Non-Coolant Thru Drill
1.45 mm Solid Carbide Twist Drill, 2 Flutes, TA Coated, Non-Coolant
-
YG-1 0.5156 Dia. 140 Carbide TiAlN 3XD Coolant Thru Drill
33/64 CARBIDE DREAM DRILL W/ COOLANT HOLES(3XD)
-
HAM 1.7 mm Dia. 135 TA Coolant Thru Drill
1.70 mm 8XD Solid Carbide Deep Hole Drill, 2 Flutes, TA Coated, Coolant Thru
-
-
Tungaloy 48 mm Dia. 3XD Indexable Insert Drill
48mm TungDrillTwisted Indexable insert drills, L/D=3, Flat cotter