holemaking
Showing 10001–10050 of 46144 results
-
-
-
Ingersoll 1.5944 Dia. 140 TIALN 3XD, 5XD, 8XD Replaceable Spade Tip Coolant Thru
1.5945 (40.50 mm) SpadeTwist Tip
-
-
Ingersoll 1.5625 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.562 (39.67 mm) Square Insert Indexable Drills Inch|L:D Ratio – 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
HAM 3.18 mm Dia. 140 TA-C Coolant Thru Drill
1/8″ 3XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
Iscar 0.8465 Dia. Carbide TiAlN Exchangeable Drill Head Coolant Thru
.846″ Exchangeable 3 Flute Drilling Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)
-
YG-1 0.332 Dia. 118 Carbide TiAlN Jobber Non-Coolant Thru Drill
.3320 CARBIDE JOBBER LENGTH TWIST DRILL TIALN COATED
-
-
YG-1 0.0492 Dia. 135 Cobalt TiN Split Point Screw Machine Non-Coolant Thru Drill
1.25 HSS(M42) STUB LENGTH DIN1897 SPLIT POINT DRILLS TIN COATED
-
HAM 9.8 mm Dia. 137 TA-C Coolant Thru Drill
9.80 mm 30XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
HAM 2.4 mm Dia. 140 TA-CN Coolant Thru Drill
2.40 mm 8XD Solid Carbide Niro Drill, 2 Flutes, TA-CN Coated, Coolant Thru
-
-
-
Ingersoll 0.9063 Dia. 140 3XD Replaceable Tipped Drill Body Coolant Thru
0.9055 (23.000 mm)-0.9409 (23.900 mm) GoldTwist Body
-
Iscar 0.6496 Dia. Drill Tube System Coolant Thru
.650 – .679″ Drill Tubes – STS System – Outer Single Start Thread Connection
-
-
Iscar 0.748 Dia. Carbide TiAlN+TiN Exchangeable Drill Heads Coolant Thru
.748″ Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)
-
-
YG-1 5.79 mm Dia. 118 Carbide Bright Jobber Non-Coolant Thru Drill
5.79MM CARBIDE JOBBER LENGTH TWIST DRILL TIALN COATED
-
-
-
-
HAM 14.5 mm Dia. 135 TA Coolant Thru Drill
14.50 mm 12XD Solid Carbide Multi Drill, 2 Straight Flutes, TA Coated, Coolant Thru
-
HAM 9.9 mm Dia. 137 TA-C Coolant Thru Drill
9.90 mm 30XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
Iscar 1.1378 Dia. Carbide TiAlN Exchangeable Drill Heads Coolant Thru
1.138″ Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)
-
YG-1 0.2500 Dia. 140 Carbide TiAlN 3XD Coolant Thru Drill
1/4 CARBIDE DREAM DRILL INOX W/ COOLANT HOLES(3XD)
-
-
YG-1 2.5000 Dia. 132 HSS TiN Throw Away Drill Insert
2-1/2 HSS(M4) THROW AWAY DRILL Insert TIN-COATED
-
-
HAM 5.6 mm Dia. 120 TA Non-Coolant Thru Drill
5.60 mm Solid Carbide Twist Drill, 2 Flute, TA Coated, Non-Coolant
-
YG-1 0.0890 Dia. 135 Cobalt Bright Screw Machine Non-Coolant Thru Drill
#43 HSS(M42) SCREW MACHINE DRILL
-
-
-
-
Iscar 0.7244 Dia. Carbide TiAlN Exchangeable Drill Head Coolant Thru
.724″ Exchangeable 3 Flute Drilling Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)
-
-
-
Iscar 0.5906 Dia. Carbide TiAlN Double Margin Drill Heads Coolant Thru
.591″ Double Margin Drilling Heads for DCN Drills for Machining Steel with High Surface Finish Results
-
Ingersoll 0.2953 Dia. 140 1.5XD Replaceable Tipped Drill Body Coolant Thru
0.2953 (7.5 mm)-0.3110 (7.9 mm) GoldTwist Body
-
-
-
YG-1 3.1875 Dia. 144 HSS Hardslick Throw Away Drill Insert
3-3/16 SUPER HSS(T15) SV-POINT THROW-AWAY DRILL Insert H-COATED
-
Iscar 0.8976 Dia. Carbide TiAlN Exchangeable Self-Centering Drill Head Coolant Thru
.898″ Exchangeable DCN Drill Self-Centering Heads for Alloy Steel and Cast Iron
-
-
-
Tungaloy 8.7 mm Dia. TiAlN 3XD Coolant Thru Drill
8.7 mm GigaJetDrill series with coolant hole, L/D=3, dia=3.0 – 20.0mm