holemaking
Showing 9751–9800 of 46144 results
-
-
YG-1 1.4062 Dia. Series 3 Straight Shank & Flute Spade Holder
SERIES 3 STRAIGHT SHANK & STRAIGHT FLUTE LONG LENGTH SPADE DRILL HOLDER
-
Iscar 0.6535 Dia. Carbide TiAlN Exchangeable Drill Head Coolant Thru
.654″ Exchangeable 3 Flute Drilling Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)
-
-
Tungaloy 1.7500 Dia. 2XD Indexable Insert Drill
1-3/4″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 2, Flat cotter
-
-
YG-1 14 mm Dia. 140 Carbide TiCN 3XD, 5XD, 7XD Drill Insert Coolant Thru
14.00MM I-DREAMDRILL Insert INOX TICN-COATED #B
-
YG-1 16.6 mm Dia. 140 Carbide TiAlN 5XD Coolant Thru Drill
16.60MM CARBIDE DREAM DRILL INOX W/ COOLANT (5XD)
-
-
YG-1 0.2500 Dia. 140 Carbide TiAlN 20XD Coolant Thru Drill
1/4 CARBIDE DRILL MQL TYPE W/ COOLANT (20XD)
-
-
-
-
-
-
-
-
-
-
-
Iscar 0.8898 Dia. Carbide TiAlN Exchangeable Drill Heads Coolant Thru
.890″ Exchangeable DCN Drill Heads, for Cast Iron (ISO K Materials)
-
-
-
YG-1 0.7031 Dia. Series 1 Flanged Straight Shank-Straight Flute Spade Holder
SERIES 1 FLANGED STRAIGHT SHANK / FLUTE EXTENDED SPADE DRILL HOLDER
-
Iscar 0.7874 Dia. Carbide TiAlN Exchangeable Drill Head Coolant Thru
.787″ Exchangeable 3 Flute Drilling Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)
-
YG-1 4.1 mm Dia. 180 Flat Bottom Carbide TiAlN 2XD Non-Coolant Thru Drill
4.10MM DREAM DRILL FLAT BOTTOM DRILL W/O COOLANT HOLE (2XD)
-
-
-
YG-1 0.8437 Dia. Flat HSS TiAlN Throw Away Drill Insert
27/32 SUPER HSS (T15) FLAT BOTTOM DRILL Insert TIALN COATED
-
-
-
YG-1 11 mm Dia. 140 Carbide TiAlN 5XD Non-Coolant Thru Drill
11.00MM CARBIDE DREAM DRILL (5XD) – METRIC
-
Iscar 0.4173 Dia. Carbide TiAlN Exchangeable Self-Centering Drill Head Coolant Thru
.417″ Exchangeable DCN Drill Self-Centering Heads for Alloy Steel and Cast Iron
-
Ingersoll 0.748 Dia. Bright 4XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.748 (19.00 mm) Square Insert Indexable Drills Metric|L:D Ratio – 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
YG-1 2.094 Dia. 132 Cobalt Hardslick Throw Away Drill Insert
2-3/32 PREMIUM COBALT(M48) SV-POINT THROW-AWAY DRILL Insert H-COATED
-
-
-
-
-
YG-1 1.2187 Dia. 132 Carbide TiAlN Throw Away Drill Insert
1-7/32 CARBIDE (C2) THROW-AWAY DRILL Insert TIALN-COATED
-
Iscar 0.4961 Dia. Tube Coolant Thru Drill
0.496″ Deep Single Tube Drills with External 2 and 4 Start Thread and a Single Brazed Tip (.496-.787 dia.)
-
HAM 19.05 mm Dia. 140 TA-C Coolant Thru Drill
3/4″ 12XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
Tungaloy 0.6535 Dia. TiAlN DMC Drill Head
0.6535″ DrillMeister DMC Drill heads for indexable head drills for high accuracy drilling
-
-
-
HAM 9 mm Dia. kevlar Bright Non-Coolant Thru Drill
9.00 mm Solid Carbide Twist Drill, 2 Flutes, Special Point Grind, Bright, Non-Coolant
-
Ingersoll 1.3125 Dia. Bright 5XD Square Insert Indexable Coolant Thru Drill
1.312 (33.32 mm) Square Insert Indexable Drills|L:D Ratio – 5:1|
-
Ingersoll 1 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.000 (25.40 mm) Square Insert Indexable Drills Inch|L:D Ratio – 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
