holemaking
Showing 9551–9600 of 46144 results
-
Ingersoll 1.25 Dia. Bright BTA Brazed STS Coolant Thru
1.25 BTA Brazed|Single tube system|External 4-start thread|.496-2.559″ (12.6-65.0 mm)|
-
-
-
YG-1 0.4062 Dia. 140 Carbide TiAlN 5XD Coolant Thru Drill
13/32 CARBIDE DREAM DRILL W/ COOLANT (5XD)
-
YG-1 11 mm Dia. 140 Carbide TiAlN 5XD Coolant Thru Drill
11.00MM CARBIDE DREAM DRILL W/ COOLANT (5XD) – METRIC
-
HAM 7.9 mm Dia. 137 TA-C Coolant Thru Drill
7.90 mm 20XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
-
HAM 4.1 mm Dia. 137 TA-C Coolant Thru Drill
4.10 mm 40XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
Iscar 0.5866 Dia. Carbide TiAlN Exchangeable Flat Bottom Drill Head Coolant Thru
.587″ Exchangeable Flat Bottom DCN Drill Heads for Steel and Cast Iron (ISO P and ISO K Materials)
-
HAM 2.2 mm Dia. 135 TA Coolant Thru Drill
2.20 mm 15XD Solid Carbide Deep Hole Drill, 2 Flutes, TA Coated, Coolant Thru
-
-
HAM 15.8 mm Dia. 140 TA-C Coolant Thru Drill
15.80 mm 5XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
-
-
-
STI 7.37 mm Dia. 130 Bright Carbide 5-8XD Non-Coolant Thru Drill
7.37 MM DIA 3 FLUTE NON COOLANT BRIGHT
-
-
YG-1 1.2187 Dia. 132 Carbide Hardslick Throw Away Drill Insert
1-7/32 CARBIDE (C5) SV-POINT THROW-AWAY DRILL Insert HARDSLICK COATED
-
-
HAM 1.45 mm Dia. 135 TA Coolant Thru Drill
1.45 mm 15XD Solid Carbide Deep Hole Drill, 2 Flutes, TA Coated, Coolant Thru
-
-
-
-
YG-1 14 mm Dia. 140 Carbide TiAlN 6XD Non-Coolant Thru Drill
14.00MM CARBIDE DREAM DRILL FOR HIGH HARDENED MATERIAL (HRc50 ~ HRc70) TIALN COATED
-
HAM 1.5 mm Dia. 135 TA Coolant Thru Drill
1.50 mm 12XD Solid Carbide Deep Hole Drill, 2 Flutes, TA Coated, Coolant Thru
-
Iscar 0.9488 Dia. Tube Coolant Thru Drill
0.949″ Deep Double Tube Counterbore with a Through Hole, External 4 Start Thread and a Brazed Tip (.725-2.559 dia.)
-
-
HAM 8.6 mm Dia. 120 TA Non-Coolant Thru Drill
8.60 mm Solid Carbide Twist Drill, 2 Flute, TA Coated, Non-Coolant
-
Iscar 0.8071 Dia. Carbide TiAlN Exchangeable Drill Heads Coolant Thru
.807″ Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)
-
-
YG-1 15.7 mm Dia. 132 Carbide TiN Throw Away Drill Insert
15.70MM CARBIDE (C3) THROW-AWAY DRILL Insert TIN-COATED
-
-
STI 5.79 mm Dia. 130 TiAlN Carbide 5-8XD Non-Coolant Thru Drill
5.79 MM DIA 3 FLUTE NON COOLANT TIALN
-
STI 5.41 mm Dia. 130 Bright Carbide 5-8XD Non-Coolant Thru Drill
5.41 MM DIA 3 FLUTE NON COOLANT BRIGHT
-
YG-1 0.6562 Dia. 118 HSS Oxide Morse Taper Shank Non-Coolant Thru Drill
21/32 HSS(M2) MORSE TAPER SHANK TWIST DRILLS
-
YG-1 15.3 mm Dia. 140 Carbide TiAlN 5XD Coolant Thru Drill
15.30MM CARBIDE DREAM DRILL INOX W/ COOLANT (5XD)
-
Tungaloy 0.4921 Dia. TiAlN DMP Drill Head
0.4921″ DrillMeister DMP Drill heads for indexable head drills. General purpose type.
-
-
HAM 11.2 mm Dia. 140 TA-C Coolant Thru Drill
11.20 mm 3XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
HAM 9 mm Dia. 137 TA-C Coolant Thru Drill
9.00 mm 20XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
Iscar 0.8438 Dia. 4XD Indexable Square Insert Coolant Thru Drill
0.844″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 4xD
-
-
YG-1 0.4062 Dia. 140 Carbide TiAlN 5XD Coolant Thru Drill
13/32 CARBIDE DREAM DRILL W/ COOLANT HOLES(5XD)
-
Ingersoll 1.2205 Dia. Bright 4XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.221 (31.00 mm) Square Insert Indexable Drills Metric|L:D Ratio – 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Ingersoll 0.2362 Dia. 140 3XD Replaceable Tipped Drill Body Coolant Thru
0.2362 (6.000 mm)-0.2520 (6.400 mm) GoldTwist Body
-
Tungaloy 9.6 mm Dia. TiAlN 5XD Coolant Thru Drill
9.6 mm GigaJetDrill series with coolant hole, L/D=5, dia=3.0 – 20.0mm
-
Iscar 0.6562 Dia. Carbide TiAlN Double Margin Drill Heads Coolant Thru
.657″ Double Margin Drilling Heads for DCN Drills for Machining Cast Iron with High Surface Finish Results