holemaking
Showing 9101–9150 of 46144 results
-
Iscar 0.7087 Dia. Carbide TiAlN Exchangeable Drill Head Coolant Thru
0.709 Exchangeable General Use Drilling Heads
-
-
-
HAM 3.6 mm Dia. 120 Bright Non-Coolant Thru Drill
3.60 mm Solid Carbide Twist Drill, 2 Flute, Bright, Non-Coolant
-
Ingersoll 0.5512 Dia. 140 5XD Replaceable Tipped Drill Body Coolant Thru
0.5512 (14.000 mm)-0.5669 (14.400 mm) GoldTwist Body
-
-
HAM 6.1 mm Dia. 120 Bright Non-Coolant Thru Drill
6.10 mm Solid Carbide Twist Drill, 2 Flute, Bright, Non-Coolant
-
YG-1 1.6875 Dia. 132 Cobalt Hardslick Throw Away Drill Insert
1-11/16 PREMIUM COBALT(M48) SV-POINT THROW-AWAY DRILL Insert H-COATED
-
Ingersoll 0.5312 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.531 (13.49 mm) Square Insert Indexable Drills Inch|L:D Ratio – 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
HAM 8 mm Dia. 137 TA-C Coolant Thru Drill
8.00 mm 25XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
HAM 3 mm Dia. 140 TA-C Coolant Thru Drill
3.00 mm 12XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
YG-1 17 mm Dia. 180 Flat Bottom Carbide TiAlN 2XD Non-Coolant Thru Drill
17.00MM DREAM DRILL FLAT BOTTOM DRILL W/O COOLANT HOLE (2XD)
-
-
-
-
-
-
HAM 5.6 mm Dia. 140 TA-CN Non-Coolant Thru Drill
5.60 mm 3XD Solid Carbide Niro Drill, 2 Flutes, TA-CN Coated, Non-Coolant
-
YG-1 0.5625 Dia. 132 Cobalt Hardslick Throw Away Drill Insert
9/16 PREMIUM COBALT(M48) SV-POINT THROW-AWAY DRILL Insert H-COATED
-
YG-1 0.7031 Dia. 132 Cobalt TiAlN Throw Away Drill Insert
45/64 PREMIUM COBALT(M48) THROW-AWAY DRILL InsertS TIALN COATED
-
-
YG-1 0.2656 Dia. 118 Carbide DLC 5XD Coolant Thru Drill
17/64 CARBIDE DREAM DRILL FOR ALUMINUM W/ COOLANT HOLES (5XD)
-
HAM 13.89 mm Dia. 140 TA-C Coolant Thru Drill
35/64″ 12XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
YG-1 0.5156 Dia. Series 0 Flanged Straight Shank-Straight Flute Spade Holder
SERIES 0 FLANGED STRAIGHT SHANK / FLUTE SHORT LENGTH HOLDER
-
-
-
-
-
-
Ingersoll 0.8661 Dia. Bright BTA STS Tubes Coolant Thru
0.866 BTA STS Tubes|Single tube system|.433-2.205″ (11.0-56 mm)|
-
-
-
YG-1 0.1969 Dia. 135 Cobalt TiN Split Point Screw Machine Non-Coolant Thru Drill
5.0 HSS(M42) STUB LENGTH DIN1897 SPLIT POINT DRILLS TIN COATED
-
-
Iscar 0.6142 Dia. Carbide TiAlN+TiN Exchangeable Drill Heads Coolant Thru
.614″ Exchangeable DCN Drill Heads, for Cast Iron (ISO K Materials)
-
YG-1 1.1875 Dia. 132 HSS TiN Throw Away Drill Insert
1-3/16 HSS(M4) THROW AWAY DRILL Insert TIN-COATED
-
Ingersoll 1.625 Dia. Bright 4XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.625 (41.28 mm) Square Insert Indexable Drills Inch|L:D Ratio – 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
-
-
-
-
Iscar 4.8819 Dia. Tube Drill System Coolant Thru
4.882-5.354″ Double-Tube Drill System with 4 Start Thread Connection Outer Tubes
-
-
-
HAM 11 mm Dia. 140 TA-C Coolant Thru Drill
11.00 mm 8XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
YG-1 2.7810 Dia. 144 HSS Hardslick Throw Away Drill Insert
2-25/32 HSS(M4) THROW-AWAY DRILL Insert HARDSLICK COATED