coolant
Showing 3801–3850 of 31046 results
-
Tungaloy 1.6250 Dia. 3XD Indexable Insert Drill
1-5/8″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 3, Flat cotter
-
-
YG-1 5 mm Dia. 140 Carbide TiAlN 20XD Coolant Thru Drill
5.00MM CARBIDE DRILL MQL TYPE W/ COOLANT (20XD)
-
Iscar 1.2598 Dia. Carbide TiAlN Exchangeable Self-Centering Drill Head Coolant Thru
1.260″ Exchangeable DCN Drill Self-Centering Heads for Alloy Steel and Cast Iron
-
YG-1 12.5 mm Dia. 132 HSS TiAlN Throw Away Drill Insert
12.50MM SUPER HSS(T15) THROW-AWAY DRILL Insert TIALN COATED
-
ZCC 1536SU05C-0810 KDG303 0.3189 Dia. 140 TIALN 5XD Coolant Thru Drill
0.3189 DIA CARBIDE COOLANT DRILL
-
Tungaloy 0.5197 Dia. TiAlN DMP Drill Head
0.5197″ DrillMeister DMP Drill heads for indexable head drills. General purpose type.
-
HAM 8.9 mm Dia. 137 TA-C Coolant Thru Drill
8.90 mm 20XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
-
YG-1 1.7812 Dia. 132 Carbide Hardslick Throw Away Drill Insert
1-25/32 CARBIDE (C5) SV-POINT THROW-AWAY DRILL Insert HARDSLICK COATED
-
Ingersoll 0.4331 Dia. 140 3XD Replaceable Tipped Drill Body Coolant Thru
0.4331 (11.0 mm) QwikTwist Body
-
-
Ingersoll 1.2205 Dia. Bright 5XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.221 (31.00 mm) Square Insert Indexable Metric Drills|L:D Ratio – 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
Ingersoll 1.031 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.031 (26.19 mm) Square Insert Indexable Drills Inch|L:D Ratio – 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
-
Ingersoll 1.5312 Dia. Bright 5XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.531 (38.89 mm) Square Insert Indexable Inch Drills|L:D Ratio – 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
YG-1 15.5 mm Dia. 132 Carbide TiAlN Throw Away Drill Insert
15.50MM CARBIDE (C2) THROW-AWAY DRILL Insert TIALN-COATED
-
-
YG-1 6 mm Dia. 140 Carbide TiAlN 5XD Coolant Thru Drill
6.00MM CARBIDE DREAM DRILL INOX W/ COOLANT (5XD)
-
Tungaloy 0.7480 Dia. TiAlN DMP Drill Head
0.748″ DrillMeister DMP Drill heads for indexable head drills. General purpose type.
-
Iscar 0.6562 Dia. TiAlN 5XD Non-Coolant Thru Drill
0.656″ Solid Carbide Drills with Coolant Holes, Drilling Depth 5xD
-
-
-
-
-
-
HAM 6.4 mm Dia. 137 TA-C Coolant Thru Drill
6.40 mm 25XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
Iscar 0.689 Dia. 4XD Indexable Square Insert Coolant Thru Drill
0.688″ Indexable Square Insert Drills with Coolant Holes, Drilling Depth 4xD
-
YG-1 88.01 mm Dia. 144 HSS TiAlN Throw Away Drill Insert
88.00MM SUPER HSS(T15) SM POINT THROW-AWAY DRILL Insert TIALN COATED
-
YG-1 1.5312 Dia. 132 Carbide TiAlN Throw Away Drill Insert
1-17/32 CARBIDE (C5) THROW-AWAY DRILL Insert TIALN-COATED
-
-
Tungaloy 0.6024 Dia. TiAlN DMP Drill Head
0.6024″ DrillMeister DMP Drill heads for indexable head drills. General purpose type.
-
-
-
HAM 9.7 mm Dia. 137 TA-C Coolant Thru Drill
9.70 mm 25XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
Ingersoll 1.25 Dia. Bright BTA Brazed STS Coolant Thru
1.25 BTA Brazed|Single tube system – crosshole|External 4-start thread|.496-2.559″ (12.6-65.0 mm)|
-
YG-1 74 mm Dia. 144 HSS Hardslick Throw Away Drill Insert
74.00MM SUPER HSS(T15) SV-POINT THROW-AWAY DRILL Insert HARDSLICK COATED
-
-
-
-
-
Ingersoll 0.4803 Dia. 140 TIALN 3XD, 5XD, 8XD Replaceable Drill Tip Coolant Thru
0.4803 (12.20 mm) QwikTwist Tip Carbide
-
-
Tungaloy 21.5 mm Dia. 4XD Indexable Insert Drill
21.5mm TungSix-Drill Indexable insert drills, L/D=4, Flat cotter
-
-
