coolant
Showing 27101–27150 of 31046 results
-
-
-
-
-
-
-
Tungaloy 7.7 mm Dia. TiAlN 5XD Coolant Thru Drill
7.7 mm GigaJetDrill series with coolant hole, L/D=5, dia=3.0 – 20.0mm
-
HAM 8.8 mm Dia. 137 TA-C Coolant Thru Drill
8.80 mm 30XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
YG-1 0.7187 Dia. 132 Carbide Hardslick Throw Away Drill Insert
23/32 CARBIDE (C5) SV-POINT THROW-AWAY DRILL Insert H-COATED
-
-
-
-
-
Tungaloy 4.7 mm Dia. TiAlN 5XD Coolant Thru Drill
4.7 mm GigaJetDrill series with coolant hole, L/D=5, dia=3.0 – 20.0mm
-
-
-
-
-
Ingersoll 1.375 Dia. Bright BTA Brazed STS Coolant Thru
1.375 BTA Brazed|Single tube system|External 4-start thread|.496-2.559″ (12.6-65.0 mm)|
-
YG-1 0.6719 Dia. 132 Carbide TiN Throw Away Drill Insert
43/64 CARBIDE (C5) THROW-AWAY DRILL Insert TIN-COATED
-
-
-
YG-1 0.7031 Dia. 132 Carbide TiAlN Throw Away Drill Insert
45/64 CARBIDE (C2) THROW-AWAY DRILL Insert TIALN-COATED
-
-
-
Iscar 0.9843 Dia. Carbide TiAlN Double Margin Drill Heads Coolant Thru
.984″ Double Margin Drilling Heads for DCN Drills for Machining Cast Iron with High Surface Finish Results
-
-
Tungaloy 0.4567 Dia. TiAlN DMP Drill Head
0.4567″ DrillMeister DMP Drill heads for indexable head drills. General purpose type.
-
HAM 7.14 mm Dia. 137 TA-C Coolant Thru Drill
9/32″ 40XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
Iscar 2.2126 Dia. Tube Coolant Thru Drill
2.213″ Deep Double Tube Counterbore with a Through Hole, External 4 Start Thread and a Brazed Tip (.725-2.559 dia.)
-
Iscar 0.3465 Dia. Carbide TiAlN 3XD, 5XD, 8XD Drill Head Coolant Thru
.346″ DCM Drill Heads for Cast Iron
-
-
-
-
-
Ingersoll 0.6692 Dia. 140 3.5XD Replaceable Tipped Drill Body Coolant Thru
.6693-.7047 QwikTwist Body
-
-
YG-1 2.094 Dia. 132 HSS TiAlN Throw Away Drill Insert
2-3/32 HSS(M4) THROW AWAY DRILL Insert TIALN-COATED
-
-
Ingersoll 1.0945 Dia. 140 TIALN 3XD, 5XD, 8XD Replaceable Spade Tip Coolant Thru
1.0945 (27.80 mm) SpadeTwist Tip
-
-
-
HAM 5 mm Dia. 137 TA-C Coolant Thru Drill
5.00 mm 15XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
Iscar 0.5079 Dia. Carbide TiAlN Exchangeable Drill Heads Coolant Thru
.508″ Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)
-
Ingersoll 0.6574 Dia. Bright 2XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.658 (16.71 mm) Square Insert Indexable Drills – Inch|L:D Ratio – 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
-
Ingersoll 1.1811 Dia. 140 TIALN 3XD, 5XD, 8XD Replaceable Spade Tip Coolant Thru
1.1811 (30.00 mm) SpadeTwist Tip
-