coolant
Showing 11651–11700 of 31046 results
-
-
YG-1 2.0000 Dia. 132 HSS Hardslick Throw Away Drill Insert
2.000 SUPER HSS(T15) SV-POINT THROW-AWAY DRILL Insert HARDSLICK COATED
-
-
-
-
HAM 6.7 mm Dia. 137 TA-C Coolant Thru Drill
6.70 mm 30XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
Ingersoll 0.8858 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.886 (22.50 mm) Square Insert Indexable Drills Metric|L:D Ratio – 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|
-
YG-1 9.8 mm Dia. 140 Carbide TiAlN 20XD Coolant Thru Drill
9.80MM CARBIDE DRILL MQL TYPE W/ COOLANT (20XD)
-
YG-1 0.1562 Dia. 140 Carbide TiAlN 5XD Coolant Thru Drill
5/32 CARBIDE DREAM DRILL INOX W/ COOLANT (5XD)
-
HAM 10.1 mm Dia. 137 TA-C Coolant Thru Drill
10.10 mm 30XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
YG-1 7 mm Dia. 118 Carbide DLC 5XD Coolant Thru Drill
7.00MM CARBIDE DREAM DRILL FOR ALUMINUM W/ COOLANT (5XD) – METRIC
-
-
-
Iscar 0.3976 Dia. Carbide TiAlN Exchangeable Self-Centering Drill Head Coolant Thru
.398″ Exchangeable DCN Drill Self-Centering Heads for Alloy Steel and Cast Iron
-
-
Ingersoll 1.0394 Dia. 140 TIALN 3XD, 5XD, 8XD Replaceable Spade Tip Coolant Thru
1.0394 (26.40 mm) SpadeTwist Tip
-
Iscar 1.4567 Dia. Tube Counterbore Coolant Thru
1.457″ Deep Single Tube Counterbore Without a Through Hole, Internal Single Start Thread and a Brazed Tip (.571-2.559 dia.)
-
HAM 10.5 mm Dia. 140 TA-C Coolant Thru Drill
10.50 mm 8XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
Tungaloy 0.4685 Dia. TiAlN DMP Drill Head
0.4685″ DrillMeister DMP Drill heads for indexable head drills. General purpose type.
-
Tungaloy 0.5312 Dia. TiAlN 5XD Coolant Thru Drill
0.5313″ GigaJetDrill series with coolant hole, L/D=5
-
Ingersoll 1.0118 Dia. 140 TIALN 3XD, 5XD, 8XD Replaceable Drill Tip Coolant Thru
1.0118 (25.70 mm) QwikTwist Tip Carbide
-
HAM 8.33 mm Dia. 137 TA-C Coolant Thru Drill
21/64″ 30XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
HAM 3.3 mm Dia. 140 TA-C Coolant Thru Drill
3.30 mm 12XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
YG-1 9.2 mm Dia. 140 Carbide TiAlN 3XD Coolant Thru Drill
9.20MM CARBIDE DREAM DRILL W/ COOLANT (3XD) – METRIC
-
-
YG-1 0.5315 – 0.5508 Dia. 3XD Flanged Shank Drill Holder (I-Dream)
.5315 MIN DIA .5508 MAX DIA I-DREAM DRILL HOLDER, FLANGED SHANK (3XD)
-
Tungaloy 0.4219 Dia. TiAlN 3XD Coolant Thru Drill
0.4219″ GigaJetDrill series with coolant hole, L/D=3
-
-
HAM 13.7 mm Dia. 140 TA-C Coolant Thru Drill
13.70 mm 8XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
-
-
Iscar 0.8858 Dia. Carbide TiAlN Exchangeable Self-Centering Drill Head Coolant Thru
.886″ Exchangeable DCN Drill Self-Centering Heads for Alloy Steel and Cast Iron
-
-
-
Ingersoll 1.0937 Dia. Bright 2XD Square Insert Indexable Coolant Thru Drill
1.094 (27.79 mm) Square Insert Indexable Drills|L:D Ratio – 2:1|
-
YG-1 6.9 mm Dia. 140 Carbide TiAlN 3XD Coolant Thru Drill
6.90MM CARBIDE DREAM DRILL W/ COOLANT (3XD) – METRIC
-
Ingersoll 0.9449 Dia. 140 8XD Replaceable Tipped Drill Body Coolant Thru
0.9449 (24.0 mm)-0.9803 (24.9 mm) GoldTwist Body
-
-
-
Ingersoll 1.063 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.063 (27.00 mm) Square Insert Indexable Drills Inch|L:D Ratio – 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
Iscar 0.5787 Dia. Carbide TiAlN Exchangeable Drill Head Coolant Thru
.579″ Exchangeable 3 Flute Drilling Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)
-
-
YG-1 1.8437 Dia. 132 HSS TiAlN Throw Away Drill Insert
1-27/32 SUPER HSS(T15) THROW-AWAY DRILL Insert TIALN COATED
-
-
-
-
YG-1 14.5 mm Dia. 132 Carbide Hardslick Throw Away Drill Insert
14.50MM CARBIDE (C5) SV-POINT THROW-AWAY DRILL Insert H-COATED