coolant
Showing 10851–10900 of 31046 results
-
YG-1 0.6875 Dia. 132 Carbide TiAlN Throw Away Drill Insert
11/16 CARBIDE (C5) THROW-AWAY DRILL Insert TIALN-COATED
-
HAM 6.4 mm Dia. 137 TA-C Coolant Thru Drill
6.40 mm 25XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
-
-
Ingersoll 2 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
2.000 (50.80 mm) Square Insert Indexable Drills Inch|L:D Ratio – 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
-
-
Ingersoll 1.693 Dia. Bright BTA STS Tubes Coolant Thru
1.693 BTA STS Tubes|Single tube system|.433-2.205″ (11.0-56 mm)|
-
YG-1 1.3750 Dia. 132 Cobalt TiAlN Throw Away Drill Insert
1-3/8 PREMIUM COBALT(M48) THROW-AWAY DRILL InsertS TIALN COATED
-
-
HAM 7 mm Dia. 135 TA Coolant Thru Drill
7.00 mm 7XD Solid Carbide Multi Drill, 2 Straight Flutes, TA Coated, Coolant Thru
-
YG-1 12.5 mm Dia. 132 Cobalt Hardslick Throw Away Drill Insert
12.50MM PREMIUM COBALT(M48) SV-POINT THROW-AWAY DRILL Insert H-COATED
-
-
Tungaloy 43 mm Dia. 4XD Indexable Insert Drill
43mm TungSix-Drill Indexable insert drills, L/D=4, Flat cotter
-
YG-1 89.99 mm Dia. 144 Cobalt Hardslick Throw Away Drill Insert
90.00MM PREMIUM COBALT(M48) SV-POINT THROW-AWAY DRILL Insert HARDSLICK COATED
-
-
-
Tungaloy 24.5 mm Dia. 4XD Indexable Insert Drill
24.5mm TungDrillTwisted Indexable insert drills, L/D=4, Flat cotter
-
Iscar 0.5394 Dia. Carbide TiAlN Double Margin Drill Heads Coolant Thru
.539″ Double Margin Drilling Heads for DCN Drills for Machining Cast Iron with High Surface Finish Results
-
Ingersoll 1.1417 Dia. Bright 4XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.142 (29.00 mm) Square Insert Indexable Drills Metric|L:D Ratio – 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
-
Ingersoll 0.748 Dia. 140 5XD Replaceable Tipped Drill Body Coolant Thru
0.7480 (19.0 mm) QwikTwist Body
-
-
HAM 11.5 mm Dia. 140 TA-C Coolant Thru Drill
11.50 mm 5XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
YG-1 17.5 mm Dia. 132 Carbide TiAlN Throw Away Drill Insert
17.50MM CARBIDE (C5) SM POINT THROW-AWAY DRILL Insert TIALN-COATED
-
YG-1 11.5 mm Dia. 140 Carbide TiAlN 20XD Coolant Thru Drill
11.50MM CARBIDE DRILL MQL TYPE W/ COOLANT (20XD)
-
-
Iscar 0.4331 Dia. Tube Coolant Thru Drill
0.433″ Deep Single Tube Drills with External Single Thread Connection and a Brazed Single Tip (.315-.582 dia.)
-
-
Iscar 2.2126 Dia. Double Tube Coolant Thru Drill
2.213″ Deep Double Tube Drills with External 4 Start Thread and Brazed Tips (.725-2.559 dia.)
-
Iscar 0.4331 Dia. 8XD Indexable Drill Head Coolant Thru
0.433″ Indexable Head Drills with Coolant Holes and One Flat Shank, Drilling Depth 8xD
-
Ingersoll 0.9449 Dia. 140 TIALN Replaceable Drill Tip Coolant Thru
0.9449 (24.00 mm) Gold Twist Replaceable Tips|Cast Iron|Grade IN2505|
-
-
YG-1 5.8 mm Dia. 140 Carbide TiAlN 5XD Coolant Thru Drill
5.80MM CARBIDE DREAM DRILL INOX W/ COOLANT (5XD)
-
-
YG-1 11 mm Dia. 132 Carbide TiAlN Throw Away Drill Insert
11.00MM CARBIDE (C2) THROW-AWAY DRILL Insert TIALN-COATED
-
Iscar 0.7756 Dia. Carbide TiAlN 3XD, 5XD, 8XD Drill Head Coolant Thru
.776″ General Use DCM Drill Heads
-
-
-
Iscar 1.1299 Dia. Tube Coolant Thru Drill
1.13″ Deep Double Tube Counterbore without a Through Hole, External 4 Start Thread and a Brazed Tip (.725-2.559 dia.)
-
Iscar 1.2992 Dia. Tube Coolant Thru Drill
1.311″ Deep Single Tube Counterbore with Through Hole, External 4 Start Thread and a Brazed Tip (.744-2.559 dia.)
-
YG-1 8.4 mm Dia. 140 Carbide TiAlN 5XD Coolant Thru Drill
8.40MM CARBIDE DREAM DRILL INOX W/ COOLANT (5XD)
-
Ingersoll 0.4331 Dia. 140 8XD Replaceable Tipped Drill Body Coolant Thru
0.4331 (11.0 mm)-0.4488 (11.4 mm) GoldTwist Body
-
Iscar 0.7598 Dia. Carbide TiAlN Double Margin Drill Heads Coolant Thru
.760″ Double Margin Drilling Heads for DCN Drills for Machining Steel with High Surface Finish Results
-
-
Tungaloy 1.0511 Dia. TiAlN SMP Drill Head
1.0511″ DrillForceMeister SMP Drill heads for indexable head drill
-
