coolant
Showing 7451–7500 of 31046 results
-
YG-1 0.8594 Dia. Series 1.5 Taper Shank-Straight Flute Spade Holder
SERIES 1.5 TAPER SHANK & STRAIGHT FLT SHORT LENGTH SPADE DRILL HOLDER
-
YG-1 1.8437 Dia. 132 HSS Hardslick Throw Away Drill Insert
1-27/32 SUPER HSS(T15) SV-POINT THROW-AWAY DRILL Insert H-COATED
-
YG-1 1.0469 Dia. 132 HSS Hardslick Throw Away Drill Insert
1-3/64 SUPER HSS(T15) SV-POINT THROW-AWAY DRILL Insert H-COATED
-
Iscar 0.5354 Dia. Carbide TiAlN Exchangeable Flat Bottom Drill Head Coolant Thru
.535″ Exchangeable Flat Bottom DCN Drill Heads for Steel and Cast Iron (ISO P and ISO K Materials)
-
-
-
-
YG-1 3.5 mm Dia. 140 Carbide TiAlN 20XD Coolant Thru Drill
3.50MM CARBIDE DRILL MQL TYPE W/ COOLANT (20XD)
-
YG-1 0.6562 Dia. 132 Carbide TiAlN Throw Away Drill Insert
21/32 CARBIDE (C2) THROW-AWAY DRILL Insert TIALN-COATED
-
-
Ingersoll 1.1875 Dia. Bright 5XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.187 (30.15 mm) Square Insert Indexable Inch Drills|L:D Ratio – 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
Iscar 0.3346 Dia. Carbide TiAlN Exchangeable Drill Heads Coolant Thru
.335″ Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)
-
-
-
HAM 9.53 mm Dia. 137 TA-C Coolant Thru Drill
3/8″ 25XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
YG-1 1.2812 Dia. 132 Carbide TiAlN Throw Away Drill Insert
1-9/32 CARBIDE (C2) THROW-AWAY DRILL Insert TIALN-COATED
-
-
HAM 6.8 mm Dia. 140 TA Coolant Thru Drill
6.80 mm 3XD Solid Carbide Multi Drill, 2 Straight Flutes, TA Coated, Coolant Thru
-
-
-
HAM 9.8 mm Dia. 137 TA-C Coolant Thru Drill
9.80 mm 40XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
-
-
-
YG-1 0.7500 Dia. 132 HSS Hardslick Throw Away Drill Insert
3/4 HSS(M4) THROW-AWAY DRILL Insert HARDSLICK COATED
-
YG-1 3.2187 Dia. 144 HSS Hardslick Throw Away Drill Insert
3-7/32 SUPER HSS(T15) SV-POINT THROW-AWAY DRILL Insert H-COATED
-
-
-
-
Iscar 0.2165 Dia. Carbide TiAlN Exchangeable Drill Heads Coolant Thru
.216″ Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)
-
-
Iscar 1.2519 Dia. Carbide TiAlN Exchangeable Drill Heads Coolant Thru
1.252″ Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)
-
-
YG-1 17 mm Dia. 140 Carbide TiAlN 8XD Coolant Thru Drill
17.00MM CARBIDE DREAM DRILL INOX W/ COOLANT (8XD)
-
-
-
-
-
HAM 10.9 mm Dia. 137 TA-C Coolant Thru Drill
10.90 mm 15XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
-
YG-1 15.7 mm Dia. 132 Carbide TiAlN Throw Away Drill Insert
15.70MM CARBIDE (C3) THROW-AWAY DRILL Insert TIALN-COATED
-
YG-1 1.8437 Dia. 132 HSS Hardslick Throw Away Drill Insert
1-27/32 HSS(M4) THROW-AWAY DRILL Insert HARDSLICK COATED
-
-
HAM 10.6 mm Dia. 135 Bright Coolant Thru Drill
10.60 mm 5XD Solid Carbide Multi Drill, 2 Straight Flutes, Bright, Coolant Thru
-
-