coolant
Showing 5701–5750 of 31046 results
-
Iscar 0.3898 Dia. Carbide TiAlN 3XD, 5XD, 8XD Drill Head Coolant Thru
.390″ General Use DCM Drill Heads
-
Tungaloy 22 mm Dia. 3XD Indexable Drill w/ Flanged Shank
22mm DrillMeister Indexable head drill with flanged shank
-
YG-1 3.8 mm Dia. 140 Carbide TiAlN 5XD Coolant Thru Drill
3.80MM CARBIDE DREAM DRILL W/ COOLANT (5XD) – METRIC
-
-
-
-
Iscar 0.386 Dia. Carbide TiAlN Exchangeable Drill Heads Coolant Thru
.386″ Exchangeable DCN Drill Heads, for Cast Iron (ISO K Materials)
-
YG-1 18.5 mm Dia. 132 HSS TiAlN Throw Away Drill Insert
18.50MM SUPER HSS(T15) THROW-AWAY DRILL Insert TIALN COATED
-
Ingersoll 0.7165 Dia. Bright BTA Brazed STS Coolant Thru
0.718 BTA Brazed|Single tube system – crosshole|External 4-start thread|.496-2.559″ (12.6-65.0 mm)|
-
-
-
YG-1 1.5312 Dia. 132 Carbide Hardslick Throw Away Drill Insert
1-17/32 CARBIDE (C5) SV-POINT THROW-AWAY DRILL Insert H-COATED
-
HAM 7.94 mm Dia. 137 TA-C Coolant Thru Drill
5/16″ 25XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
YG-1 4.8 mm Dia. 118 Carbide DLC 5XD Coolant Thru Drill
4.80MM CARBIDE DREAM DRILL FOR ALUMINUM W/ COOLANT (5XD) – METRIC
-
YG-1 19.5 mm Dia. 132 Carbide TiAlN Throw Away Drill Insert
19.50MM CARBIDE (C5) SM POINT THROW-AWAY DRILL Insert TIALN-COATED
-
Iscar 0.9961 Dia. Carbide TiAlN Exchangeable Drill Heads Coolant Thru
.996″ Exchangeable DCN Drill Heads, for Cast Iron (ISO K Materials)
-
HAM 11.3 mm Dia. 137 TA-C Coolant Thru Drill
11.30 mm 25XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
Tungaloy 3.9 mm Dia. TiAlN 5XD Coolant Thru Drill
3.9 mm GigaJetDrill series with coolant hole, L/D=5, dia=3.0 – 20.0mm
-
-
Tungaloy 1.6250 Dia. 5XD Indexable Insert Drill
1-5/8″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 5, Flat cotter
-
Ingersoll 0.5394 Dia. 140 TIALN 3XD, 5XD, 8XD Replaceable Drill Tip Coolant Thru
0.5394 (13.70 mm) QwikTwist Tip Carbide
-
-
Ingersoll 1.063 Dia. Bright 2XD Flat Bottom Square Insert Indexable Coolant Thru Drill
1.063 (27.00 mm) Square Insert Indexable Drills – Inch|L:D Ratio – 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
-
Iscar 1.5591 Dia. Tube Coolant Thru Drill
1.559″ Deep Double Tube Counterbore without a Through Hole, External 4 Start Thread and a Brazed Tip (.725-2.559 dia.)
-
-
-
YG-1 0.4687 Dia. 140 Carbide TiAlN 5XD Coolant Thru Drill
15/32 CARBIDE DREAM DRILL W/ COOLANT (5XD)
-
-
YG-1 0.9688 Dia. Series 2 Taper Shank-Straight Flute Spade Holder
SERIES 2 TAPER SHANK & STRAIGHT FLT SHORT LENGTH SPADE DRILL HOLDER
-
-
YG-1 23.7 mm Dia. 140 Carbide TiAlN 3XD, 5XD, 7XD Drill Insert Coolant Thru
23.70MM I-DREAMDRILL Insert TIALN-COATED #F
-
Iscar 0.4724 Dia. 8XD Indexable Drill Head Coolant Thru
0.472″ Indexable Head Drills with One Flat Shank, Drilling Depth 8xD
-
-
-
YG-1 11 mm Dia. 132 Carbide Hardslick Throw Away Drill Insert
11.00MM CARBIDE (C5) SV-POINT THROW-AWAY DRILL Insert HARDSLICK COATED
-
YG-1 1.4375 Dia. 132 Carbide TiAlN Throw Away Drill Insert
1-7/16 CARBIDE (C2) THROW-AWAY DRILL Insert TIALN-COATED
-
HAM 5.8 mm Dia. 140 TA-C Coolant Thru Drill
5.80 mm 5XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
-
-
-
-
-
-
Iscar 0.517 Dia. Tube Coolant Thru Drill
0.517″ Deep Single Tube Drills with External 2 and 4 Start Thread and 2 or 3 Brazed Tips (.496-2.559 dia.)
-
-
HAM 11.8 mm Dia. 140 TA-C Coolant Thru Drill
11.80 mm 5XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Coolant Thru