coolant
Showing 5301–5350 of 31046 results
-
HAM 12.5 mm Dia. 137 TA-C Coolant Thru Drill
12.50 mm 40XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
Iscar 0.5787 Dia. Carbide TiAlN Exchangeable Flat Bottom Drill Head Coolant Thru
.579″ Exchangeable Flat Bottom DCN Drill Heads for Steel and Cast Iron (ISO P and ISO K Materials)
-
Iscar 0.7244 Dia. Carbide TiAlN Exchangeable Flat Bottom Drill Head Coolant Thru
.724″ Exchangeable Flat Bottom DCN Drill Heads for Steel and Cast Iron (ISO P and ISO K Materials)
-
-
-
-
Iscar 0.4882 Dia. Carbide TiAlN 3XD, 5XD, 8XD Drill Head Coolant Thru
.488″ General Use DCM Drill Heads
-
-
Ingersoll 1.8125 Dia. Bright 2XD Square Insert Indexable Coolant Thru Drill
1.813 (46.05 mm) Square Insert Indexable Drills|L:D Ratio – 2:1|
-
YG-1 8.2 mm Dia. 140 Carbide TiAlN 8XD Coolant Thru Drill
8.20MM CARBIDE DREAM DRILL INOX W/ COOLANT (8XD)
-
-
-
Iscar 0.5591 Dia. Carbide TiAlN Exchangeable Drill Heads Coolant Thru
.559″ Exchangeable DCN Drill Heads, for Cast Iron (ISO K Materials)
-
HAM 7.1 mm Dia. 140 TA-CN Coolant Thru Drill
7.10 mm 5XD Solid Carbide Niro Drill, 2 Flutes, TA-CN Coated, Coolant Thru
-
YG-1 0.9688 Dia. 132 Carbide TiAlN Throw Away Drill Insert
31/32 CARBIDE (C5) THROW-AWAY DRILL Insert TIALN-COATED
-
YG-1 3.8125 Dia. 144 HSS Hardslick Throw Away Drill Insert
3-13/16 SUPER HSS(T15) SV-POINT THROW-AWAY DRILL Insert HARDSLICK COATED
-
-
Ingersoll 0.5 Dia. 140 TIALN 3XD, 5XD, 8XD Replaceable Drill Tip Coolant Thru
0.5000 (12.70 mm) QwikTwist Tip Carbide
-
-
-
-
-
HAM 14.6 mm Dia. 140 TA-CN Coolant Thru Drill
14.60 mm 5XD Solid Carbide Niro Drill, 2 Flutes, TA-CN Coated, Coolant Thru
-
Ingersoll 0.7795 Dia. Bright 4XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.780 (19.81 mm) Square Insert Indexable Drills Inch|L:D Ratio – 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
-
YG-1 1.0313 Dia. 132 Carbide Hardslick Throw Away Drill Insert
1-1/32 CARBIDE (C5) SV-POINT THROW-AWAY DRILL Insert HARDSLICK COATED
-
Iscar 0.5866 Dia. Carbide TiAlN Double Margin Drill Heads Coolant Thru
.587″ Double Margin Drilling Heads for DCN Drills for Machining Steel with High Surface Finish Results
-
-
Iscar 0.204 Dia. Carbide TiAlN Exchangeable Drill Heads Coolant Thru
.204″ Exchangeable DCN Drill Heads, for Stainless Steel and High Temperature Alloys (ISO M & S Materials)
-
HAM 2.38 mm Dia. 135 TA-C Coolant Thru Drill
3/32″ 25XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
YG-1 12.8 mm Dia. 140 Carbide TiAlN+TiN 5XD Coolant Thru Drill
12.80MM CARBIDE DREAM DRILL HIGH FEED 5XD W/ COOLANT HOLE SLOT DIN 6537 (H-COATING)
-
Ingersoll 0.4921 Dia. 140 TIALN Double Margin Replaceable Drill Tip Coolant Thru
0.4921 (12.50 mm) Gold Twist Double Margin (M2) Replaceable Tip|Steel
-
YG-1 1.7500 Dia. 132 Carbide Hardslick Throw Away Drill Insert
1-3/4 CARBIDE (C5) SV-POINT THROW-AWAY DRILL Insert HARDSLICK COATED
-
-
-
Tungaloy 1.8750 Dia. 2XD Indexable Insert Drill
1-7/8″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 2, Flat cotter
-
HAM 10.7 mm Dia. 137 TA-C Coolant Thru Drill
10.70 mm 30XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
-
HAM 9.13 mm Dia. 137 TA-C Coolant Thru Drill
23/64″ 25XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
YG-1 16.8 mm Dia. 140 Carbide TiAlN 3XD Coolant Thru Drill
16.80MM CARBIDE DREAM DRILL INOX W/ COOLANT (3XD)
-
-
-
-
-
-
-
Iscar 0.8583 Dia. Carbide TiAlN Double Margin Drill Heads Coolant Thru
.858″ Double Margin Drilling Heads for DCN Drills for Machining Steel with High Surface Finish Results