Holemaking
Showing 46851–46900 of 47158 results
-
HAM 5 mm Dia. 140 TA-CN Non-Coolant Thru Drill
5.00 mm 3XD Solid Carbide Niro Drill, 2 Flutes, TA-CN Coated, Non-Coolant
-
Tungaloy 25.5 mm Dia. 3XD Indexable Insert Drill
25.5mm TungDrillTwisted Indexable insert drills, L/D=3, Flat cotter
-
YG-1 0.7500 Dia. 132 HSS TiAlN Throw Away Drill Insert
3/4 SUPER HSS(T15) SM POINT THROW-AWAY DRILL Insert TIALN COATED
-
Iscar 0.2717 Dia. Carbide TiAlN Exchangeable Drill Heads Coolant Thru
.272″ Exchangeable DCN Drill Heads, for Cast Iron (ISO K Materials)
-
-
YG-1 1.0469 Dia. 132 Carbide TiN Throw Away Drill Insert
1-3/64 CARBIDE (C2) THROW-AWAY DRILL Insert TiN-COATED
-
Iscar 0.5079 Dia. Carbide TiAlN Exchangeable Drill Head Coolant Thru
0.508 Exchangeable General Use Drilling Heads
-
Ingersoll 0.7874 Dia. Bright BTA STS Tubes Coolant Thru
0.787 BTA STS Tubes|Single tube system|.433-2.205″ (11.0-56 mm)|
-
HAM 8.6 mm Dia. 140 TA-C Coolant Thru Drill
8.60 mm 8XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
YG-1 0.368 Dia. 140 Carbide TiAlN+TiN 5XD Coolant Thru Drill
.3680 CARBIDE DREAM DRILL HIGH FEED 5XD W/ COOLANT HOLE SLOT (H-COATING)
-
YG-1 7.9 mm Dia. 140 Carbide TiAlN+TiN 5XD Coolant Thru Drill
7.90MM CARBIDE DREAM DRILL HIGH FEED 5XD W/ COOLANT HOLE SLOT DIN 6537 (H-COATING)
-
-
-
Iscar 0.5512 Dia. Carbide TiAlN Exchangeable Chip Splitting Drill Head Coolant Thru
.551″ Exchangeable Chip Splitting Drill Heads for Stainless and Alloyed Steel
-
YG-1 0.7031 Dia. Series 1 Straight Shank & Flute Spade Holder
SERIES 1 STRAIGHT SHANK & STRAIGHT FLUTE EXTENDED LENGTH SPADE DRILL HOLDER
-
YG-1 2.5000 Dia. Series 5 Straight Shank & Flute Spade Holder
SERIES 5 STRAIGHT SHANK & STRAIGHT FLUTE SHORT LENGTH SPADE DRILL HOLDER
-
YG-1 24 mm Dia. 132 HSS Hardslick Throw Away Drill Insert
24.00MM SUPER HSS(T15) THROW-AWAY DRILL Insert HARDSLICK COATED
-
Ingersoll 1.625 Dia. Bright 3XD Square Insert Indexable Coolant Thru Drill
1.625 (41.28 mm) Square Insert Indexable Drills|L:D Ratio – 3:1|
-
YG-1 0.3750 Dia. 132 Carbide TiN Throw Away Drill Insert
3/8 CARBIDE (C5) THROW-AWAY DRILL Insert TIN-COATED
-
YG-1 17 mm Dia. 140 Carbide TiAlN 8XD Coolant Thru Drill
17.00MM CARBIDE DREAM DRILL INOX W/ COOLANT (8XD)
-
-
-
-
-
HAM 13.89 mm Dia. 140 TA-CN Coolant Thru Drill
35/64″ 8XD Solid Carbide Niro Drill, 2 Flutes, TA-CN Coated, Coolant Thru
-
-
-
Tungaloy 0.5000 Dia. 4XD Indexable Insert Drill
1/2″ TungDrillTwisted Indexable insert drills with side & rear coolant port, L/D = 4, Flat cotter
-
-
-
YG-1 0.3937 Dia. 130 TiN Stub Non-Coolant Thru Drill
10.0MM HSS-EX HPD-SUS TWIST DRILL TiN-COATED (STUB)
-
-
-
Iscar 1.3386 Dia. Drill Tube System Coolant Thru
1.339 – 1.456″ Drill Tubes – STS System – Outer Single Start Thread Connection
-
YG-1 0.2090 Dia. 130 Cobalt TiN Jobber Non-Coolant Thru Drill
#4 HSS(M35) JOBBER, WORM PATTERN TYPE SS GOLD-P DRILL FOR DEEP HOLES
-
YG-1 5.05 mm Dia. 140 Carbide TiAlN 6XD Non-Coolant Thru Drill
5.05MM CARBIDE DREAM DRILL FOR HIGH HARDENED MATERIAL (HRc50 ~ HRc70) TIALN COATED
-
Iscar 2.2126 Dia. Tube Drill System Coolant Thru
2.213-2.559″ Double-Tube Drill System with 4 Start Thread Connection Outer Tubes
-
YG-1 4.8 mm Dia. 140 Carbide TiAlN 3XD Coolant Thru Drill
4.80MM CARBIDE DREAM DRILL W/ COOLANT (3XD) – METRIC
-
-
-
YG-1 0.3020 Dia. 130 Cobalt TiN Jobber Non-Coolant Thru Drill
N HSS(M35) JOBBER, WORM PATTERN TYPE SS GOLD-P DRILL FOR DEEP HOLES
-
-
-
-
Ingersoll 0.8583 Dia. 140 TIALN Replaceable Drill Tip Coolant Thru
0.8583 (21.80 mm) Gold Twist Replaceable Tips|Cast Iron|Grade IN2505|
-
-
YG-1 1.2402 – 1.2594 Dia. 7XD Flanged Shank Drill Holder (I-Dream)
1.2402 MIN DIA 1.2594 MAX DIA I-DREAM DRILL HOLDER, FLANGED SHANK (7XD)
-
-
-
