Holemaking
Showing 46301–46350 of 47158 results
-
-
HAM 12.7 mm Dia. 135 TA Coolant Thru Drill
1/2″ 12XD Solid Carbide Multi Drill, 2 Straight Flutes, TA Coated, Coolant Thru
-
-
-
-
-
-
-
HAM 1.3 mm Dia. 120 Bright Non-Coolant Thru Drill
1.30 mm Solid Carbide Twist Drill, 2 Flute, Bright, Non-Coolant
-
-
HAM 7 mm Dia. 137 TA-C Coolant Thru Drill
7.00 mm 30XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
-
HAM 2.7 mm Dia. 135 TA Coolant Thru Drill
2.70 mm 5XD Solid Carbide Deep Hole Drill, 2 Flutes, TA Coated, Coolant Thru
-
-
YG-1 10.2 mm Dia. 140 Carbide TiAlN 20XD Coolant Thru Drill
10.20MM CARBIDE DRILL MQL TYPE W/ COOLANT (20XD)
-
-
Iscar 0.374 Dia. Carbide TiAlN 3XD, 5XD, 8XD Drill Head Coolant Thru
.374″ General Use DCM Drill Heads
-
Ingersoll 0.563 Dia. Bright 3XD Flat Bottom Square Insert Indexable Coolant Thru Drill
0.563 (14.30 mm) Square Insert Indexable Drills Inch|L:D Ratio – 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|
-
-
Iscar 0.9134 Dia. Carbide TiAlN Exchangeable Self-Centering Drill Head Coolant Thru
.913″ Exchangeable DCN Drill Self-Centering Heads for Alloy Steel and Cast Iron
-
-
-
YG-1 0.0935 Dia. 135 HSS TiN Straight Shank Jobber Non-Coolant Thru Drill
#42 HSS(M2) JOBBERS LENGTH STRAIGHT SHANK GOLD-P DRILLS
-
YG-1 0.3480 Dia. 118 Carbide Bright Jobber Twist Non-Coolant Thru Drill
S CARBIDE JOBBER LENGTH TWIST DRILL
-
YG-1 0.1457 Dia. 130 Cobalt TiN Jobber Non-Coolant Thru Drill
3.7 HSS(M35) JOBBER, WORM PATTERN TYPE STRAIGHT SHANK GOLD-P DRILL FOR DEEP HOLES
-
-
-
YG-1 0.4687 Dia. Flat HSS TiN Throw Away Drill Insert
15/32 SUPER HSS (T15) FLAT BOTTOM DRILL Insert TIN COATED
-
HAM 8.6 mm Dia. 140 TA-C Coolant Thru Drill
8.60 mm 5XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
-
-
YG-1 0.281 Dia. 135 Cobalt Split Point Aircraft Non-Coolant Thru Drill
K HSSCo5 6″ AIRCRAFT EXTENSION DRILL 135 DEGREE SPLIT POINT COLORING
-
-
-
-
HAM 2.5 mm Dia. 120 Bright Non-Coolant Thru Drill
2.50 mm Solid Carbide Twist Drill, 2 Flute, Bright, Non-Coolant
-
YG-1 1.0000 Dia. 132 Carbide Hardslick Throw Away Drill Insert
1.000 CARBIDE (C5) SV-POINT THROW-AWAY DRILL Insert HARDSLICK COATED
-
-
YG-1 0.3580 Dia. 135 Cobalt TiN Straight Shank Jobber Non-Coolant Thru Drill
T HSS(M42) JOBBERS LENGTH STRAIGHT SHANK GOLD-P DRILLS
-
YG-1 5.5 mm Dia. 140 Carbide TiAlN 3XD Coolant Thru Drill
5.50MM CARBIDE DREAM DRILL INOX W/ COOLANT (3XD)
-
HAM 6 mm Dia. 137 TA-C Coolant Thru Drill
6.00 mm 20XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
-
-
YG-1 10.4 mm Dia. 140 Carbide TiAlN+TiN 5XD Coolant Thru Drill
10.40MM CARBIDE DREAM DRILL HIGH FEED 5XD W/ COOLANT HOLE SLOT DIN 6537 (H-COATING)
-
-
Ingersoll 0.4055 Dia. 140 TIALN 3XD, 5XD, 8XD Replaceable Drill Tip Coolant Thru
0.4055 (10.30 mm) QwikTwist Tip Carbide
-