Holemaking
Showing 46201–46250 of 47158 results
-
-
YG-1 0.3160 Dia. 130 Cobalt TiN Jobber Non-Coolant Thru Drill
O HSS(M35) JOBBER, WORM PATTERN TYPE SS GOLD-P DRILL FOR DEEP HOLES
-
YG-1 16 mm Dia. 132 Carbide TiN Throw Away Drill Insert
16.00MM CARBIDE (C5) THROW-AWAY DRILL Insert TIN-COATED
-
YG-1 0.4531 Dia. 118 Carbide TiAlN Jobber Non-Coolant Thru Drill
29/64 CARBIDE JOBBER LENGTH TWIST DRILL TIALN COATED
-
-
-
-
-
Iscar 4.843 Dia. Drill Tube System Coolant Thru
4.843 – 5.315″ Drill Tubes – STS System – Outer Single Start Thread Connection
-
YG-1 42 mm Dia. 132 Carbide TiN Throw Away Drill Insert
42.00MM CARBIDE (C2) THROW-AWAY DRILL Insert TiN-COATED
-
-
-
-
Tungaloy 3.5 mm Dia. TiAlN 8XD Coolant Thru Drill
3.5 mm GigaJetDrill series with coolant hole, L/D=8, dia=3.0 – 16.0mm
-
Ingersoll 1.25 Dia. Bright BTA Brazed STS Coolant Thru
1.25 BTA Brazed|Single tube system|External 4-start thread|.496-2.559″ (12.6-65.0 mm)|
-
-
-
YG-1 0.2656 Dia. 140 Carbide TiAlN 3XD Coolant Thru Drill
17/64 CARBIDE DREAM DRILL W/ COOLANT HOLES(3XD)
-
-
YG-1 0.2460 Dia. 130 Cobalt TiN Jobber Non-Coolant Thru Drill
D HSS(M35) JOBBER, WORM PATTERN TYPE SS GOLD-P DRILL FOR DEEP HOLES
-
-
YG-1 35 mm Dia. 132 Carbide TiAlN Throw Away Drill Insert
35.00MM CARBIDE (C3) THROW-AWAY DRILL Insert TIALN-COATED
-
-
-
-
-
HAM 9.6 mm Dia. 140 TA-CN Non-Coolant Thru Drill
9.60 mm 3XD Solid Carbide Niro Drill, 2 Flutes, TA-CN Coated, Non-Coolant
-
-
-
YG-1 10.5 mm Dia. 140 Carbide TiAlN 6XD Non-Coolant Thru Drill
10.49MM CARBIDE DREAM DRILL FOR HIGH HARDENED MATERIAL (HRc50 ~ HRc70) TIALN COATED
-
-
Ingersoll 0.813 Dia. Bright 4XD Square Insert Indexable Coolant Thru Drill
0.813 (20.65 mm) Square Insert Indexable Drills|L:D Ratio – 4:1|
-
YG-1 0.0595 Dia. 135 HSS Bright Screw Machine Non-Coolant Thru Drill
#53 HSS(M2) SCREW MACHINE DRILL
-
-
-
HAM 5.3 mm Dia. 140 TA-CN Non-Coolant Thru Drill
5.30 mm 3XD Solid Carbide Niro Drill, 2 Flutes, TA-CN Coated, Non-Coolant
-
-
-
HAM 18.5 mm Dia. 140 TA-C Non-Coolant Thru Drill
18.50 mm 5XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Non-Coolant
-
-
HAM 4.65 mm Dia. 137 TA-C Coolant Thru Drill
4.65 mm 30XD Solid Carbide Deep Hole Drill, 2 Flutes, TA-C Coated, Coolant Thru
-
-
YG-1 1.0000 Dia. Flat HSS TiN Throw Away Drill Insert
1.000 SUPER HSS (T15) FLAT BOTTOM DRILL Insert TIN COATED
-
-
YG-1 0.9252 Dia. 135 Cobalt TiN Split Point Screw Machine Non-Coolant Thru Drill
23.5 HSS(M42) STUB LENGTH DIN1897 SPLIT POINT DRILLS TIN COATED
-
-
-
-
-
